ArchiCAD 24: Design Tutorial Part 1 | 2021 | David Tomic

[@cutsclothing]

We see you rocking the limited drop! Let's do it! ✍️

[@DavidTomic]

❤

[@somadinaonyeacho5579]

i would love to try one of yours

[@alqamzi804]

Thank you for the tutorial. I was 5 days away from getting ArchiCAD! But after seeing the hard and complicated work inside the Layout sheets in the final stage of your work, that's Noway for me to work with this!

[@DavidTomic]

Everyone is different and it's good you did your research first! Despite the fact I discouraged you, I'm glad the video helped you make a decision.

[@kingdavid5473]

Thank you for this precious gift. The impact is outstanding!

[@DavidTomic]

Glad I could help mate!

[@roshealy7517]

I’m so enjoying working through your tutorial, trying to build my skills…I hate those orange lines too.

[@jonathanmillan7557]

Excelente video, soy de Colombia y me gustan muchos tus videos. Me han ayudado mucho a manejar el programa.

[@DavidTomic]

Glad I could help!

[@jamjam7924]

I didn't know Sergio Aguero did ArchiCAD tutorials as well? Good luck on your move to Barcelona champ. Oh and thanks for the amazing tutorial, exactly what I was looking for.

[@DavidTomic]

What can I say, multi-talented man 😉

[@Arqbrunao]

AMAZING VIDEO, YOU ROCK. JUST DID IT!! THANK YOU FOR THE VIDEO!!

[@Ed_Krco]

Hvala na video mladi gospodine.

[@DavidTomic]

Bez problema!

[@mwetizopuzzle9301]

Thanks for the vid !!! Big up

[@markloveable1]

Thank you for the tutorials

[@fadysaliba2853]

Love your accent. No hesitation while explaining. Well done. So you prefer Twinmotion to Lumion?

[@DavidTomic]

Twinnotion is free with archicad at the moment, so for the time being, yeah!

[@mtarchitects426]

Thank you David

[@DavidTomic]

Most welcome!

[@johnmonero2939]

on the best according to architecture thanks to you we are helped thanks, thanks. thanks to you.

[@andrinbaumann7136]

Nice vid👍 maybe i can help you out with a little tool to extend points and the "frame" tool. If you didn't knew it. The first tool is called "change in length" you can click all objects, press this button and click to where you want to have all those points. For the second tool (frametool) switch to the thick option and frame everything you want. No just stretch it where you want to have and all things are going to stretch. Im sorry for my bad english.. I am from switzerland😂 have a nice day!

[@haseeb5414]

Nice work Sir, i wish there is a rendering section too

[@DavidTomic]

This is part 2, next monday

[@somadinaonyeacho5579]

AWESOME TUTORIAL, JUST FIGURED OUT I HAVE BEEN DOING IT WRONGLY. Can you make a tutorial on archicad layering while designing. thanks

[@DavidTomic]

I'm sure you weren't doing it wrong, everyone just has a different style :)

[@bassshire]

Aw youre as beautiful and dedicated as always 😊

[@mbihnkongo1966]

Hi David I am not able to see the high you put for the footing, ground and roof at the start of the video.

[@AlbertHolmwood]

Thank you for these great lessons! I have Archicad 24 also but there's no "Wall - External" and I have no "stud partition" in the wall list. Could you tell me how can I have them?

[@DavidTomic]

You can try download the international template or you can create your own for both :)

[@salamayad8757]

thanks a lot

[@khardlow3067]

Could you please teach how to use the shell tool .. it’s been doing my heading for days. Christ you make it more easier

[@hanmgulsum1958]

Thanks for the tutorial ! "Ctrl + i" command doesnt work for my both 24 and 25 programme. Is it just for Mac ? If so, Is there an equivalent command for Windows because it is very useful command.

[@DavidTomic]

Hey, definitely not just a mac thing as I recorded this video on a Windows pc. You can create custom shortcuts from your environment preferences if its not already active

[@eefjevanputten8539]

When I drag my ground floor on my cliff home sheet, I can't see the furniture (the bed, kitchen, toilet). Do you know how to view these on the sheet?

[@DavidTomic]

You need to adjust your layer view settings and save that layer combination on the viewmap

[@brandinisocleany1687]

There is no Australian Project Template? Do I download it from somewhere or is it meant to be there?

[@peikai3110]

That exporting pdf is so much... less complex? I use publishing sets but everything is so confusing... is there any difference between the two?

[@ramansingh268]

Hi David, just a small question. How can we save newly created material as favourite so that we don't have to do the process again? I tried to create the wood oak light material but it was not there in another new project.

[@DavidTomic]

Create a template is the quickest or export and import to projects

[@heylisa3568]

Why we should never do any drawing in the project map? I saw you did I the drawing in the sketch design

[@lukasklepsa]

Hello, I might ask, goes to Macbook M1 to seamlessly download ArchiCad, Thank you

[@DavidTomic]

Based on current testing, M1 and archicad work great! But tests are not completed

[@lukasklepsa]

@@DavidTomic Thank you, I might ask which laptop would you recommend?

[@roboto227]

Hi bro, everytime i try to trim the roof a small piece of the wall is still visible at the roof, its like it doesn't cut it right beneath the roof instead at the same height. Do you know how to fix this im going crazy and can't find it anywhere here on youtube...

[@DavidTomic]

Check the discord group.chat link in the description of one of my latest videos and drop a couple screenshots in the group. Someone will be able to help with a bit more detail!

[@roboto227]

@@DavidTomic thank you bro you're great!

[@Mr.E0714]

would you mind to share your templates? if is it possible that would be great to everyone pleaseeee

[@DavidTomic]

If you check out the patreon link in the description, you can get all the archicad files I've created for youtube :)

[@JaavierAlfonso]

Hi, at the min 35:20 u use a comand that is "Ctrl + ???" i speak spanish, so i had troubles to undesrtood that, anyone can help me ?

[@DavidTomic]

Ctrl + i is what you're looking for 😊

[@patrickfontoura9290]

I love your videos but in some instances you really need to go slower... that would be so helpful thank you.

[@DavidTomic]

Change the speed of the videos 🤣 haha just kidding. I'll do my best to make things easier