Archive Garage Tacoma Leaf Springs Install How To

How to Install Archive Garage Tacoma Leaf Springs
Archive Garage MD, HD, XD springs available here:
archivegarage.com/shop-archiv...
Sorry, I was a little winded because I got sick the day before an install!
HAMMER HANGERS®:
archivegarage.com/shop-archiv...

[@digitalbend1]

You left out the hardest part! Getting the center pin to fall into the axle perch! That needs to be explained / taught. It's a nightmare for most!!!

[@archivegarage7638]

It's very simple, don't try to install a lift spring on 1 side, while the other side still has the stock flat spring locked down. Notice in the video we don't have a stock spring on the other side. Just make sure to follow how we have the axle pinion supported by 3 jackstands so it won't roll down and fall.

[@mrkodyscoots]

Watching this after did it with 2 tiny jack stands and a floor jack.. after dropping the driveshaft had to pull out the factory bottle jack and many pry bars later we are together. 10/10 follow this method😂.

[@chocolon1129]

Can I tighten the front bolt of the leaf pack before putting weight on the truck? I just mine installed and my buddy tightened the front one before putting weight on the truck, he did waited to tighten the rear.

[@archivegarage7638]

Yeah, that's ok with poly bushings only (not ok with bonded rubber bushings)

[@kaulanayang8218]

can you use these leaf packs with stock hangars and shackles?

[@archivegarage7638]

Yes, no problem, but you'll just miss out on the ride quality improvement that Hammer Hangers bring

[@doitfordega1578]

What kind of grease do you use