ArdubroFX Mini Trilogy - Public Domain PCB's

[@Leemonoid]

Brilliant! Thanks for all the work you put in to publish your designs. I think the screen on the right is the best...

[@megazoid]

No thanks needed Lee. I was thinking of sending the one on the right to the States 😉 Just waiting for stick-on pads. 😄

[@blackhole7818]

This is really awesome

[@АлександрМит-ч5е]

Hi, I really liked your project! Where can I find the gerber file?

[@megazoid]

I thought people would probably create a Gerber using the Fabrication tool in EasyEDA (Fabrication menu > PCB Fabrication File(gerber) ). However, I've now added the ready made Gerber's to the OSHW Labs project page (link in description) at the bottom as attachments. Pick the one you want. The boards are regular thickness (1.6mm). All tested and working, but build this project at your own risk 😉

[@АлександрМит-ч5е]

​@@megazoidThank you very much!

[@АлександрМит-ч5е]

@@megazoid Hello, which board is better to choose?

[@АлександрМит-ч5е]

Hi, Is the firmware instruction suitable for the second board?

[@megazoid]

The second board? ArduBroFX-ProMicro-Regular? if it's that one, the "Burn bootloader" instructions are the same as Mr.Blinky's DIY Arduboy GT project (link on my oshwlab page). Both projects I listed have good instructions on burning an ArduboyFX bootloader. The Teensy and ProMicro-Regular : * From the tools menu select Board > Arduboy versions > Arduboy * From the tools menu select bootloader > Cathy3K (starts with menu) * From the Tools menu select your programmer (Arduino as ISP when using an Arduino) Burn bootloader ProMicro-Alternate-Wiring Very different Arduino IDE settings. Refer to the settings shown on the "Arduboy DIY with FX" hackster project (link on my oshwlab page).

[@АлександрМит-ч5е]

Hi, I re-soldered everything from the beginning, everything is fine, but when I start games, the game does not start, but some top line runs. I am in despair, and I do not know what the problem is! Please help.

[@megazoid]

I don't know. You could try posting the problem on the Arduboy Community forum with some pictures in the help section.

[@АлександрМит-ч5е]

Hi, After loading the library, the image on the screen with the inscriptions arduboy activator runs and twitches. What is the reason?

[@megazoid]

You mean loading the flash-image.bin (the games) to the flash? or the bootloader? You may have not applied the SSD1309 display patch perhaps? In the Activator, go to the "Options" drop down menu and select "Apply SSD1309 display patch".

[@АлександрМит-ч5е]

@@megazoid I mean the flash-image.bin entry. On the arduboy screen, some settings, and it says that the mod chip is not found, the image is twitching.

[@megazoid]

@@АлександрМит-ч5е I didn't have this sort of problem. Hard to know what is happening. I bought "TZT 1.54 inch 7 pin SSD1309 screens" and they worked fine. I used W25Q128FVSG (Winbond) for the flash. Both from Aliexpress. Make sure the W25Q128FVSG flash chip is the right way around. There is a dot on the PCB near the flash. Make sure the flash chip "dot" is next to the PCB dot. If this correct, then you should looking for soldering issues or problems.

[@АлександрМит-ч5е]

@@megazoid I used W25Q128JVSIM as per instructions.

[@АлександрМит-ч5е]

Hi, I re-soldered everything from the beginning, everything is fine, but when I start games, the game does not start, but some top line runs. I am in despair, and I do not know what the problem is! Please help.

[@LogmanFX]

LOL, you've got 666 subscribers! 😆😆😆

[@megazoid]

Uh ho! 😯😲

[@АлександрМит-ч5е]

Hi, What kind of PNP transistor is needed?

[@megazoid]

You need to look at the BOM list on the oshwlab project page.

[@АлександрМит-ч5е]

Hi, Portable Activator The link to the file does not work. Where can I find this file?

[@megazoid]

I can't post URL's in comments, but it's in MrBlinky's GitHub page > Arduboy-FX-mod-chip. The link in the "Arduboy DIY with FX" Hackster IO project works just fine BTW.

[@АлександрМит-ч5е]

@@megazoid Thanks you!