Arduino 4WD Obstacle Avoidance Car

[@mythnotfound7070]

this guy deservs 100000000000000 subs he made the perfect vid!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

[@buhlemogotlane5413]

Hi, are you adriel.

[@mythnotfound7070]

@@buhlemogotlane5413 hey hru i cant wait for school to start

[@aarushjain3060]

on god bro, this shit literally answered my question on how to install two L298N motor drivers

[@Arhamy_Kaminy]

​@@buhlemogotlane5413.

[@planker]

Thank you for the demonstration. Once I have an HC-05 I will construct the Bluetooth car.

[@PerezDjoum]

Bonjour . J'ai vraiment apprécié la réalisation j'aimerais que vous m'aidiez avec la liste de tout les matériaux utilisés pour la réalisation de ce projet ainsi que leurs caractéristiques

[@biker_photographer]

I try the line tracking and The obstacle avoidance mode both Are working fine but the main issue I can’t upload both file and the same time

[@robofactorysa]

Hi Harley, the code is designed to work independently, you will need to upload the different code to use the different modes.

[@rhandynastor4866]

thank you. I have also this type but the manual is not printed clearly. Thanks for this.

[@technofydigitalprint1937]

hello our car lights are blinking but is not moving. We are using the same batteries as you. And batteries are fully charged, but the car is not moving , we also can't find the uno R3 board in the software so we selected the arduino uno instead. PLEASE HELP

[@bryan4693]

*Good Night. I'm using power supply of 9 volts connected by a plug(near conection usb) directly to arduino uno* Car doesn't move but servomotor still moving if is a object in front* How i can check if outs is giving energy to motors?

[@moneymoney1943]

Very detailed. I appreciate your video!

[@abrahamlincolnafrica8491]

i just finish building it, code was well uploaded, compilation well done, all the led blinks but no movement, please what can i do. i powered it with regular 9v battery

[@robofactorysa]

Hello. Please check that the battery is fully charged. You can also try changing the speed setting to a higher value

[@Exoudar]

At 44:54 it says "wire the 12v to the VIN on the UNO." My question is: shouldn't it be the 5V ? Wouldn't that damage my arduino? Sorry I am new at this, please clarify to me.

[@dimitri2821]

The VIN pin is a net connected to the arduino's power input. In this case, it is powering the motor board at +12V via that pin, since the arduino is receiving its power through 5.5mm barrel plug, VIN acts as an external output. Also, arduino UNO has an input voltage max of 20V and recommended at 7-12V

[@robofactorysa]

@@dimitri2821 thanks, you are correct

[@thuthukakhoza682]

do the batteries charge when the USB cable is connected?

[@NotGooseNoMore]

why do when i connect the battery usb, it doesn't turn on at all, like the UNO board isn't even blinking

[@robofactorysa]

this uses 2 X 18650 batteries which is about 7,4V. The USB cable only gives you 5v which is lower than what is required

[@tronghuynh43]

can you combine ur code toghether

[@barrymasindi7801]

Can you please help me. when I verify the code it says i should pick a board but i dont know which board is the correct one i need to pick, for obstacle avoidance

[@robofactorysa]

Hello. If you purchased this exact kit then it will be an uno R3 board that you need to pick

[@RoboticsLab-y9m]

ya bro this is bussing

[@AyushZenith]

Bro, it showing only south Africa while ordering...any solution?

[@robofactorysa]

Hello. Sorry specific product is specifically sold in South Africa. You can find a similar one here www.amazon.com/Marhynchus-Smart-Chassis-Tracking-Platform/dp/B0BS1RVLC8/ref=mp_s_a_1_14?crid=1LJGP97NDTXQM&keywords=4wd+smart+robot+car+kit&qid=1680530299&sprefix=4wd+robot+%2Caps%2C925&sr=8-14

[@oratiletyobeka9148]

can you get an updated video

[@VinothKumar-qi8xv]

Please make tron making video i am mechanical engineering but iam interested in coding and electronic work

[@rajiwranjan8798]

Mobile sa connect kar sakta hai

[@japieoos]

At approximately 50/51 mins I get an error message when I want to copy code for line tracking mode. Not sure how to progress. Missing FQBN (Fully Qualified Board Name) Compilation error: Missing FQBN (Fully Qualified Board Name)

[@sebastianrivera3112]

¿Where do you get the motor wires from?

[@robofactorysa]

Hello you can use any electronic jumper wire. You can get this from your local electronics store or can be purchased in South Africa from here www.robofactory.co.za/229-jumper-cables

[@kousilifestyle9829]

Where would we get the battery holder

[@robofactorysa]

www.robofactory.co.za/accessories/409-2-x-18650-battery-storage-case-with-onoff-switch.html

[@Padhaiwala2.0]

Nyc

[@sabujose961]

My front wheel is not turning

[@Daniel20027]

All led's is blinking but no movement From the car.

[@robofactorysa]

Hello, please check that your battery is charged. This uses 18650 batteries. You can also increase the speed variable in the code

[@BOSS_69_YT]

Bro u give real code

[@bumblebee2j88gamer2]

Sup abullah 😢

[@LoaiMalaya]

L

[@manu_g_66]

which is the motor driver used

[@robofactorysa]

it is the L298N Dual Stepper Motor www.robofactory.co.za/arduino-modules/124-l298n-dual-stepper-motor-driver-board-module.html

[@PerezDjoum]

Bonjour . J'ai vraiment apprécié la réalisation j'aimerais que vous m'aidiez avec la liste de tout les matériaux utilisés pour la réalisation de ce projet ainsi que leurs caractéristiques