We upgrade this Grizzly metal belt sander from ON/OFF to DEAD SLOW/PENNY CLENCH FAST! 🔥Safety Squint T-Shirt! teespring.com/... Shop Gear www.etsy.com/c...
Пікірлер: 309
@TheSteveMeister5 жыл бұрын
Best way to get the same readings is to set the voltmeter to the off position and your guaranteed to the same readings everytime.
@junkbot156 жыл бұрын
"I've seen your big bill" They say you learn something new every day, this is not one of those days.
@julians72685 жыл бұрын
It's crazy how much I enjoy these videos. Just sit back, grab a 12 pk. and it's like I actually have Canadian friends!
@mitchellmitchell69384 жыл бұрын
“How do you like the acrid breath of management condensing down your neck”- best quote EVER!!!!!
@wd9dau6 жыл бұрын
What’s gray and crispy and hangs from the ceiling? Amateur Electrician!
@Thefreakyfreek6 жыл бұрын
wd9dau we call that a Belgian electricision
@Pancreaticdefect6 жыл бұрын
"I love work. I could watch it all day." One of my favorite sayings and also 100% truth. I used to watch "This Old House" for hours on PBS as a kid. It was mesmerizing.
@talisolin5 жыл бұрын
i had a minor heart attack when he called Norm Abrams a patron saint in a different video
@Guysm1l3y6 жыл бұрын
When the worlds of industrial hydraulics and electricity unite... run for friggin' cover.
@PyroShim6 жыл бұрын
Instead of just schmoo or angry pixies it is angry schmoo.
@Noise-Bomb6 жыл бұрын
PyroShim No mate its worse. We get angry pixie shmoo
@Jgoo756 жыл бұрын
AvE seems to have more fun and entertains he self a lot more when there’s someone there to interact with. I love it. Not that there’s anything wrong with the solo videos, I love those as well, just a nice way to mix things up.
@Maleko486 жыл бұрын
Where were these videos when I was an operating engineer running a mobile concrete batching plant??! We had to pay ~$10k to have an emergency fix after one of our 50KW inverters went up in flames on the job site. But seriously, this material is gold for the DIY home shop guys. Thank you for making these videos.
@mikeselectricstuff6 жыл бұрын
Ferrules are great but dude, get a proper ratchet crimp tool!
@arduinoversusevil20256 жыл бұрын
They're so expensive here that they tend to grow legs...
@adriandaw34516 жыл бұрын
A fitter donated his to me when I was building a kit car 30 years ago... about the only tool I can still find, and it gets used regularly.
@carlholm78676 жыл бұрын
I've always used the cheap ass stamped sheet metal crimp tools for that. Never fucking works and I always blamed the terminals. Then I tried my friends ratcheting one. I promise you that I could hear the angels singing!
@thomasflynn53666 жыл бұрын
Wait. Is Adrian Daw Dewclaw? Do we have our first clue?
@hgbugalou6 жыл бұрын
Speaking expensive, I own this Greenlee MK50ML-138 crimper: bit.ly/2BTc8eo Made in Germany and totally worth it if you crimp a lot and value your hands not being sore after work since the wife is out of town this week. There are dies for ferrules, the YBR crimp connectors, molex, 8P8C, RJ11/12, etc etc. A perfect BOLTR opportunity!
@LucasGarrow6 жыл бұрын
Sending my thanks to the Mrs. Finally got my ruler and stickerz!
@arduinoversusevil20256 жыл бұрын
I'll let her know.
@aToast3r6 жыл бұрын
T Profile pic Is From Google chrome on androids When You Have no service
@aserta6 жыл бұрын
Toaster fella, it's on all chromes.
@KylesWildWorld6 жыл бұрын
i got my stickers too! lol at first i was creeped out cause it looked like there was no sender , then i saw the little AvE in the corner XD , wheeeew i though the government was trying to send me bills or sumthin XD......
@RobertCiampa91126 жыл бұрын
Can you review this when you get a chance Thanks www.amazon.com/dp/B00OP0WZGI?aaxitk=FmQl1LahRVG8jOBPI4tB3Q
@errollgibbons43053 жыл бұрын
The dew claw must be a very valuable friend.. wish my friends weren't all carpenters.
@TBFSJjunior6 жыл бұрын
Amazed by that white DURA box. Greetings from Germany, where every house has 3-phase-400V.
@duminicad5 жыл бұрын
Jakob Schulze seriously? Since when? How?
@ianhopkins19845 жыл бұрын
Most of the world is moving to 3 phase homes, more economical,. Unfortunately most of north America is single phase to screw the population over with high electricity bills. Go figure eh!
@duminicad5 жыл бұрын
Ian Hopkins interesting, haven’t heard that in Romania or Hungary, would be cool tho
@Thompson-from-Finland5 жыл бұрын
In finland we also have 2 phase every where.
@ToastbrotRaver5 жыл бұрын
@@duminicad it's become standard since people started using more electric energy, most stoves run on 3 phase. we have 32 amp CEE outlets in our home shop what for really choochin up the pixies
@danielm21423 жыл бұрын
Everyone else: "this belt grinder runs at a fast enough speed for me" AvE and Dewclaw: *_"GAS GAS GAS!!!"_*
@tomf31503 жыл бұрын
As long as the grindy bits don't get ejected on the rollers it can go faster !
@NealMetcalf6 жыл бұрын
Send my thanks to the Mrs. Just got my Cockford-Ollie t-shirt in the mail!
@KrisJJohnson6 жыл бұрын
This dew claw guy is frikin arwsom!
@codyduncan6 жыл бұрын
Gotta love how the goofiness knob gets bumped up a knotch or two when buddies are around. And Duke Law, no less? Not bad.
@coreybuck29085 жыл бұрын
I love building these little drive panels for random odds and ends projects at work. Surprisingly capable for such a decent price.
@jonathanwright5550 Жыл бұрын
My boss made one to run a welding rig that rotated the pipe while he welded the flange ends on
@johnpossum5566 жыл бұрын
It might be set at 400hz because that was a standard avionics frequency. In any case colour me envious of the Grizzly Belt Sander that could easily make a proper hollow ground knife! Those blue belts rock, too. I've used the same one on my 3 by 21 belt sander to sharpen the lawn mower blade for years now. They really last.
@coliimusic3 жыл бұрын
I love how AvE introduces Dewclaw in a flurry of insults and then just full-canuckistanian stereotypes out a "howya doin buddy?" in just the most innocent way
@tomf31503 жыл бұрын
Irl Tellarites.
@HeathHunnicutt6 жыл бұрын
Measuring big coils with a low voltage DC high impedance transistor radio, it takes a while to charge up the magnetic field in your LR circuit. Equivalent circuit is an inductor series to a resistor, and a voltage source. If you need the coil DC resistance, just clip the meter on it and wait till it finishes revving up the pixie through the loop de loop.
@compactc96 жыл бұрын
So a friend of mine is getting into knife making, and he got a rather large belt grinder, its only a single phase, but its getting a simple VFD (not as fancy as yours) for the purposes of controlling the speed according to what he's doing. Should be fun. Already ran a sub panel to the garage. Lots of electrical going on in my life lately.
@pncorona5 жыл бұрын
AvE even flips exactly to the page in the manual like hes read the whole damn thing how much better can he be
@ziggassedup6 жыл бұрын
Gotta be worth a box of beers.
@SIkRiILLeX3 жыл бұрын
Isn't the drive expecting a 5k pot? I'd reckon that's why a half turn on the 10k would be registered as a full turn/full chooch signal to the drive :)
@Kregorius6 жыл бұрын
Those apprentice marks on the high speed wheel are for balance. Happen to have two of same kind of grinders in my shop. The dents in the video are shallow. Some have 2-3 deep drillmarks. By the way this type of grinder has some problems keeping itself straight after some wear and tear. The belt tensioning mechanism inside wears itself out and goes all wobbly. That makes the belt go right and left every time you touch the motor. Got my third belt sander with different belt tension mechanism because of that.
@quibster6 жыл бұрын
14:15 It goes full chooch at 12'o'clock because in the manual (pause 10:38) it suggests a 5k analog input and you're using a 10k pot.
@Danimal1004 жыл бұрын
doesn`t matter , you droping all voltage across fixed resistance 5k,10k,100k and the wiper does the rest
@johncox96606 жыл бұрын
I liked the speed hole reference from slap shot from way back in 1977 since it was the only part I understood . Thanks for posting .
@verdatum6 жыл бұрын
That switch is so sexy. If loving a sexy switch is wrong, I don't wanna be right.
@nhrifle3 жыл бұрын
You would take a common shop tool and turn it into a mechanism of mass laceration. My hat is off to you sir.
@Omnis26 жыл бұрын
Lmao, I had some Kronenscourg a few weeks ago as my grocer was practically giving them away. 5:35 it's got that french armpit mustiness.
@wibbledee6 жыл бұрын
best drunk stupidly cold!
@imagineaworld5 жыл бұрын
Grizzly makes a mini lathe too, really looks like the proper version of the harbor freight/minilathe.
@videolabguy6 жыл бұрын
Dude! Did you know Alex Maxey? He worked on the video tape recorder project at Ampex in 1954 to 56. Had a perfectly descriptive, yet absolutely obscene, name for every part of the machine. Would walk into the lab and say things like, "Today, we peel back the foreskin of knowledge and....". I believe I heard you use that term in another video.
@randymitchell20066 жыл бұрын
Nice to see he broke out a real meter.
@mrmiz25476 жыл бұрын
took me 6 months to figure my VFD out. I don't have a DewClaw, just the internets.
@MaturePatriot6 жыл бұрын
Were you two in the movie "The Great White North?" Older electronics were heavier built. Yes at 400Hz that belt cover would bing around the shop and make noises like a Chinese name. "I'm given 'er all she's got Captain!" I love it.
@zukikev6 жыл бұрын
Leave it run at 400 hz a while and it won't be so cold in the empire.
@captainjerk6 жыл бұрын
I knew that copper hammer was sittin' next to the manual for a reason. :D
@71dembonesTV4 жыл бұрын
You boys are having way too much fun
@williecuellar36275 жыл бұрын
How long is it going to take to troubleshoot...Wow that is a typical management question thought I was back at work...lol
@gavster896 жыл бұрын
Just make sure you keep the front guard on, I once stepped forward to let someone past and sanded right through my trousers and took half the buttons off my phone in my pocket. Just glad it was my phone and not my pecker! Variable speed is nice though :)
@coles2016 жыл бұрын
Very professional setup. I'm very impressed.
@gnarkill576 жыл бұрын
VFD belt sander.....SWEET! Grind everything!!
@claudyfocan7312 жыл бұрын
I am in my final year in college as a industrial electromechanic. I finished both my apprenticeships and passed with good grades. First apprenticeship was in a shop that builds, maintains and repairs machinery from large factories. As well as making welded constructions and machining parts on demand. (~80 employees) We were fixing a mold to make concrete slabs, got some reinforcements cut from plating, I was deburring it with a old French (1978) large 3 phase belt sander. Fucker was as tall as I am, had a 30cm wide belt. I was wearing gloves as the parts were large heavy and full of burrs. Suddenly the damn thing grabbed my left glove and I pulled my hand out so fast, I never did anything that fast in my life before lol. It ate the entire finger but the glove got stuck. If you press the emergency stop it just cuts the power 😂 Damn thing sounds like a jet engine being turned off and takes half a minute to come to a full stop. Its fast and efficient but doens’t take prisoners. One of the old timers walked past (had 40y on the job) saw me white faced in front of that machine with the shredded glove. He just said “No gloves around rotating machinery.” And kept walking past casual as ever. That was my first fuckup ever but it will be my last. No more gloves..
@drasiritzbir6 жыл бұрын
"Oooh, that is some skunky shit, yeah, i love it!" :-D Instant classic!
@JohnLee-sm8op4 жыл бұрын
Just looked up what a Dewclaw is; laughing hysterically.
@TheFridge6 жыл бұрын
I still feel sorry for you having to put up with mildly annoyed pixies (110v V's the 220v kind I get here) and not having access to three phase. I can get a three phase hookup to a residential property here in Australia, makes having a home shop so much easier. :)
@stewie31285 жыл бұрын
I’m in the US on my ex-gym 3-phase treadmill at home right now. We can get 3-phase whenever we want, just need to run a circuit.
@tpcdude6 жыл бұрын
Love the rock fragments on the motor waiting to leap without warning into the belt and fuck things silly
@wolfitirol83474 жыл бұрын
When I converted my optimum mill to CNC I put the electronics into a self welded Aluminium Box ..when a friend an electrician came by and saw my controller box he made me doing all over again but the proper " don't burn your house down" way ...where have all the good times gone when homestyle was good enough 😂😂😂
@Hagledesperado6 жыл бұрын
How long is this gonna take to troubleshoot? Haha, cracked me up.
@1all1in1one16 жыл бұрын
Every drive I have autotuned has spun the motor somewhat during the autotune function. Remember there is more than motor winding resistance at play within a motor. Impedance, reluctance, inertia, back EMF (braking characteristics), saturation time/current, hysteresis. Depending on your drive, the autotune function may be doing a whole lot more learning than you anticipate. It also may be a whole lot more imporant that it may seem.
@joeteejoetee3 жыл бұрын
NICE FREAKING BOUND PAPER MANUALS !!!
@juicedmaster6 жыл бұрын
I just kept thinking the entire time, that motor and fly wheel would make an awesome electric go kart!
@EcoMouseChannel6 жыл бұрын
I can't be the only one catching myself uttering an AvEism in the shop?
@colbyc.66986 жыл бұрын
Look at the screws on the box looks like a apprentice done that screws pointing every which away
@Jmb9056 жыл бұрын
Essential Craftsman seems to know who you are and seeing as you have a way of taking things apart is mentioned you witch i like to see
@markbottcher24596 жыл бұрын
You crack me up man,good vid. Needed a good laugh to get going this morning going. Its great to have a good laugh while you learn something. Thats why your in my top ten.
@paulhicks93996 жыл бұрын
Good to see you’re drinking decent beer.
@1one3_Racing6 жыл бұрын
I like watching these videos because he calls me a gentleman
@silvermediastudio6 жыл бұрын
Reminds you of the judge?
@Eyepatchfilms6 жыл бұрын
I wanted to see it at the full 400hz chooch taking off into orbit
@Majiksmoke6 жыл бұрын
Eyepatch Entertainment It would be the pride of the Canuckistani Space Agency.
@DrewskisBrews6 жыл бұрын
Teeth, lips, and all.
@randomron676 жыл бұрын
You god damn right I slammed that like button before the video even started. You just know it's gonna be good!
@d.j.99614 жыл бұрын
NICE! One cannot find that at Harbor Freight! That is sweet!!!
@koga73495 жыл бұрын
That LED looks great
@colsoncustoms89946 жыл бұрын
That variable speed would be great for blades. My grizzly 2 x 72" just has off and balls to the wall.
@Schorschi61346 жыл бұрын
The easiest VFD's to program are the Schneider electric from France. Many in use in the company. 👍
@aaronwallace49316 жыл бұрын
It irks me that wranglerstar is recommended to me under these vidjyeos. Not even a similar quality.
@matthewmarting36236 жыл бұрын
Fuck yeah! I’ve been continually stumped by the dearth of belt grinder related content on this channel. They’re skookum ass tools. Mine is also my lathe and my mill.
@edwardbadlands86216 жыл бұрын
Everyone needs a friend like electricleaux
@JAxford6 жыл бұрын
ferrules make me a lot of money. Every year I get given a pile of thermal imaging reports highlighting hot joints that need repairing. 80% of the time it's a ferrule. It's a quick fix just cut the ferrule off and terminate the wire directly in the terminal. They make for a neat job on control wiring but are nothing but trouble on wiring carrying a load.
@thuzil6 жыл бұрын
Thanks to you all I can ever see are the flat screw heads all out of kilter.
@zacharylagler2426 жыл бұрын
Torin Huzil OCD?
@lonhoschar19436 жыл бұрын
Love watching your reviews... the dancing pixies on most of these are WAY over my pay grade.. HOWEVER it's always interesting!! :)
@vincedibona46874 жыл бұрын
The awkward audio breaks are pure art in this VJO. *does the kiss-the-fingers-then-airs-them-out move*
@vincedibona46874 жыл бұрын
@12:52 "Speed Holes" - that was my nickname back in high school
@koremoval22265 жыл бұрын
How long is this going to take to troubleshoot? Got to be my favorite question of all time
@SoadOwnsUrFace5 жыл бұрын
I used to be the only guy in my company that called 'em Ferrules. Everyone looked at me like I was dumb whenever I said it. They called 'em bootlaces
@rupertpowell5 жыл бұрын
I think the correct name is "Bootlace Ferrule" so you are all right!
@justinmaguire11406 жыл бұрын
Nice welding clamp garage door lock.
@mattroy31546 жыл бұрын
Fuck me sideways, just got from the canadian tire a mastercrap 4x36 belt sander and here you are 1upping me right the fuck out of the game with your industrial grade one the very next day. Well played sir.
@codyblea36384 жыл бұрын
Rhodesian reacharound? You mean the Mozambique mombo. The Djibouti shooty? The Tennessee tango? The Colorado conga? I thought that maneuver was illegal in Canada.
@samgeorge47986 жыл бұрын
Ya I just spent about 5 min trying to to make a grinder joke but hear I am
@tuoppi426 жыл бұрын
That gravity challenged led looks like an eye of a terminator slave work unit from the future. Careful with that one.
@BigJohn45165 жыл бұрын
Never use a tool for a job that it’s not intended, unless it works, then go for it. Gotta get those beers open.
@_BLANK_BLANK2 жыл бұрын
Man I'm jealous of that thing.
@a.joegevara3519 Жыл бұрын
Boss gave me 2 Ingersoll compressors that have 10hp 3~ motors, a 7KV drive is almost $200. I'm going to bring it to him to program it for me. He is a very smart electrical engineer. Last thing I want is to let out the magic blue smoke...
@petti786 жыл бұрын
Someone got to giggle all day at "work" :-)
@eemonster6 жыл бұрын
ave "how the fuck am i gonna afford that" dewclaw " what? u got a house" classic dewclaw
@stevendunn62554 жыл бұрын
This is a great video, as I have 3 phase 1000 feet away but it would cost me $15,000 dollars for the electric company to run 3 phase to my house... cash in advance...
@temptorsent6 жыл бұрын
It looks like you need to install a giant red-and-yellow oh-shit mushroom on that thing, especially for those times when you find yourself "polishing" your purple mushroom with it and accidentally crank the frequency to 400Hz !
@chineseal53506 жыл бұрын
Holy shit, an elec chicken that knows some thing other than the colours brown blue and green. Well i stand corrected. Dew claw, you da man!
@bryanmartinez66006 жыл бұрын
I always wonder if this guy is a beer librarian. Has he tried German, Japanese, Scottish, Irish, and Mexican beer.
I used one of those in a hangar machine shop somewhere around the moon and it Fkn bit me lol serious skin remover lol great bit of kit think I was in the south of France 👍
@chuckmiller57635 жыл бұрын
Wire ferrules are great for car audio also. Need the right crimper though.
@Toolz19806 жыл бұрын
Did you just do a Dutch "cheers!"? Did you just say "proost!" right after opening the bottle of beer? Mind blown!
@tomdickharryjane6 жыл бұрын
The comment about the accurate breath of management condensing down your neck is so right! Are you done yet? What is it? How much longer? What do you think it is? I don't want to be a PITA but how much longer do you think? Anyone I can call? Do you need help? Did you check x,y,z yet? Could this be it? What about the ,,, did you look at that yet?
@randallslattman31196 жыл бұрын
Questions. What size motor is on the sander and what drive are you using? Also how many amps does the drive pull on the incoming power from the breaker box?
@Miss__Victoria6 жыл бұрын
About lost my finger to one of those once.... it grabbed my class 4 or whatever protective glove and yanked it right through the guard and spit it back out under the the guard or something somehow. happened to fast to actually see. and yes the guard was probably too far from the wire wheel and I had been working 70+ hours a week 7 days a week for almost a month so I wasnt "all there" lol. fell asleep standing at the bridgeport a few times lol. just standing there drilling and counter sinking holes for days.
@hans4295 жыл бұрын
The more it is good the better i tis, did i get this right?
@IvarsRuza5 жыл бұрын
😂 Fantastic language, cant stop laughing!!
@tedfarwell98126 жыл бұрын
Dewclaw rocks! Worth at least twice what you're paying him.