Ardyno - DIY Dyno Arduino Shield | Dyno Electronics for DIY Dynamometer

[@---us9xn]

Your dyno is what brought me to your channel and this shield is one of your greatest inventions. I am going to order a pair of these boards right now. Keep up the great work!

[@2STROKESTUFFING]

+- - Thanks man! That's awesome!

[@mauricevangennip-bamecobv6982]

Hi Terry, do you still sell the dyne shields. I would like to build a dyno myself.

[@gumbysenduro6546]

Fantastic this is awesome i used the software some years back now but gave up, although after seeing your vids on this built im hooked again now i can only hope these boards are available still, Cheers from the land down under your an inspiration :)

[@MarioAPN]

Do you perhaps have the software? The link in the description is unfortunately broken.

[@Gizmowerks]

Great job on your board! Soldering in the components was fun and well directed. Thanks for all the effort and sharing. Parts list and Mouser PNs are good 10-22-2018. Spent about 30$ USD shipped for everything except hall sensors.

[@2STROKESTUFFING]

Thanks!

[@delcowizzid]

Just received my ardyno board quality is A++ will be assembling tomorrow and then have to wait for my arduino to arrive

[@2STROKESTUFFING]

Awesome, thanks!

[@frankg3278]

I've pretty much done the electric motor, got the simpledyno software and have an arduino uno. Excited!

[@JRschnable33]

GREAT!!! Ordering Now!! THANK YOU for Sharing Your Knowledge making such COOL VIDEOS!!

[@burtjohnson7298]

A man of his word, top man. Order in your in box

[@2STROKESTUFFING]

+Burt Johnson Thanks!

[@MarioAPN]

Do you maybe have simple dyno sofware, just maybe because the link is broken unfortunately.

[@kittikonpromsuwan4360]

I ordered a broad dyno from your website. I suspect if it's an injection bike. Can the cap rpm tap cable be taken directly to the ignition coil? without cap from spark plug wire and hall rpm on broad, how to use it, thanks

[@GoatRopeGarage]

This is brilliant stuff.

[@SadasaTuning]

Sir... how to handle about noise... i read rpm pickup on simpledyno show upto 100.000 rpm not real rpm on motor and not stable... also if i turn on motorcycle roller sensor show rpm around 400 but roller is not moving

[@zasquatch72]

Do you have the PCB file? I can't seem to find the board or file anywhere.

[@tinkeringchaneltuftelsende4066]

Hi , i Like your Videos. How heavy must be the Roller vorm the Dyno .

[@thomaslathrop9392]

Good day, Is the PCB still available for purchase? If so what would two boards shipped to zip code 53105 in the US cost me?

[@Copozeras]

Hi! I plan to build my dyno electronics the fancy way. I have ordered an aluminum enclosure for it. I just want to make sure if I got it rigth about what can and should be grounded to what. If I paid good attention the roller hall sensor cable shielding should be connected with the metal enclosure and the capacitive engine RPM pickup shielding should be connected to the bike frame and the ardyno board. Is there anything more I should know about in therms of what should or shouldnt be grounded to eachother? As always thank you!

[@trevormcd8541]

I have received my PCB 😁😁😁Awesome job! Thanks mate👍 Busily assembling now 😁😁

[@OscarSanchez-ye3hx]

Hello, I have a 1.8 inercia roller. I tried to use ardyno for a 40hp bike. I have 20 signal per rpm and I use a gear ratio for the rpm. Everything seems to be fine but when I tried, everytime gave me different power, 30, 20, 16hp... It seems to has some retaird from the hall sensor? Due takes some time to change the rpm and the speed. What am I doing wrong? Everything in the shield looks fine. Thanks

[@unpluggedautomotive878]

Hi if still have any of these pcb’s I would like 2 please

[@itshookn8155]

Hi was wondering if i can get help with setting up the arduino Codes

[@indesapower]

hello dear, we understand you sell the complete ARDYNO circuit or you sell de electronic card and the components separated from de electronic card??? the ARDYNO software you sell separate or It´s recorded in the chip??? I understand you calculate the power only whit those two sensor Hall sensor and RPM pickup sensor??? the roller It´s not necesary calculate for this aplicattion???? Thanks for your reply

[@mhrteam3657]

Hey Dude can you explain the simple Dyno programm to work easier with it. Im allready done and i can take some Signals from the Sensor Thanks for it!

[@marklucas2045]

Will their be a easy to follow manual when purchasing your dyno card on every thing one needs to do to get Sussex

[@Michele-ue5eu]

Could you make an video where you hook up the sensors and show the whole thing working?

[@2STROKESTUFFING]

+Michele Sure, I'll do that! (after Christmas...)

[@Michele-ue5eu]

2STROKE STUFFING right now I am pretty low on free time once I find some I will be buying your board, I've been following the updates for a while now ;)

[@garbizwal]

Why can't someone just take the signals straight to the Arduino from the sensors why do they need this board?

[@tinkeringchaneltuftelsende4066]

Hallo, i Like your Channel . can you give me a Link of the Dyno Software. If i seach IT with your link , i can't find ist . Thank you .

[@Copozeras]

Hi! what thermocouples can be used directly with the ardyno board? Can I use type K?

[@2STROKESTUFFING]

You'll need an amplifier in addition to the board, google "thermocouple break out board"

[@Copozeras]

@@2STROKESTUFFING thank you! 🙏

[@Copozeras]

Its an AD8495 analogue amplifier for K-type sensors. At 5V its good for +1000°C. I am leaving this info here in case someone needs it.

[@thebanditbiker9425]

This video came up in my search and I was so excited to be able to do this but then learned the software is no longer supported. And only runs on Windows. I feel like there must be kits out there somewhere to do this with an Apple computer. Or even via Bluetooth and run on a smartphone.

[@raizenkho8918]

HI sir how i get the boards ya is the boards still available ??

[@peterjansson4017]

Can you plot the graph in SimpleDyno using only the rpm and 1 analog input(torque)? I am planning to build an engine brake dyno and it will basically output the torque from a sensor in 0,5..4,5v. In this case i do not need the roller at all. I know simpledyno is not yours but i guess that you could have the answer..

[@syamspeed996]

Website not active download?

[@andraautd]

Its maybe a stupid question. But just let me know. Is there any speciffic amount of wheight on the roller of my project dyno..?? Please..need an answer... I'm desperately courious...

[@2STROKESTUFFING]

It needs to have high enough inertia - mine is 2.17kgm and works great!

[@andraautd]

2STROKE STUFFING thank god you are replying me... Sorry i'm just happy... 😀😀 Okay sir thank you very much..

[@TK-ob5vc]

Hi I love your work. I’m going to start prototyping a larger project by starting with rc cars. I note you only have one roller rpm input. How would one go about implementing your board and 2 roller inputs for AWD instead of just RWD.

[@rinseradstaak6866]

Hey how dous ph metering work? Dou you write down the inertia of your roller in the adruino code? And is the ph calulated with rpm /time sensing?

[@2STROKESTUFFING]

+Rinse Radstaak kinda, you enter roller dimensions and/or inertia into Simpledyno and it does the calculations. Yes, you can choose to plot hp against rpm, time, speed ++

[@rinseradstaak6866]

Thanks for the fast reply man. Its clear for me now, after cristmas i will order a board. Time to have som fun😊

[@2STROKESTUFFING]

+Rinse Radstaak Great!

[@roytje3935]

I got 2 questions when are you going to work on the derbi, i would love to see that and are you going to race this bike?

[@2STROKESTUFFING]

+Roytje39 Not sure when, but definitely sometime in the future to both questions 😁

[@Szymoncncbil]

Hi, would you give me how you solved the 3pf pcb capacitor

[@Makeorbreak1]

Hey mate could this be used with a waterbrake dyno using a load cell?

[@spacyracer236]

I have been trying to come up with the resistors on the sites your recommended.. I search for 0.25w 3.3k and I come up with no matches. What am I doing wrong? bc547 transistor is retired..

[@2STROKESTUFFING]

+greg sterner That's weird... It's a very common size. Have you tried "3k3", it's often written like that. I didn't know that about the transistor. These(and many more) will work. 2N2222 2N3904 PN100 2N4401 BC337 BC546

[@spacyracer236]

yes 0.25w 3k3 resistor, does not come up.. A 330 ohm does tho..

[@2STROKESTUFFING]

+greg sterner check jameco.com

[@spacyracer236]

Thanks Alex.. looks like I will need to go to ebay and look for some of the items.. They don't even have some of the items.. wondering where your other customers found there items..

[@spacyracer236]

update, went on ebay found a kit that had all the resistors in it.. I will keep you posted.. I might need more help, I know nothing about these component and what can be substituted thanks for you patients..

[@SuperAwok]

sir can you show me how to setup com port calibration for my dyno ?

[@2STROKESTUFFING]

Between the PC and Arduino? Good info on arduino.cc

[@xibidit]

you sir are a wizard, did you design this board? dont know if you mentioned it in earlier videos.

[@2STROKESTUFFING]

+Kristoffer Persson Thanks! Yep, designed it.

[@xibidit]

that is awsome dude more dyno to the people :)

[@davespooney8472]

Hi, what was the track you played when the Patrons were revealed? Thank you!

[@2STROKESTUFFING]

+Dave Spooney Half Pipe by Huma Huma, it's found in the youtube audio library, royalty free.

[@davespooney8472]

2STROKE STUFFING brilliant, happy Xmas!

[@2STROKESTUFFING]

+Dave Spooney happy xmas!

[@chriscreations3849]

Dude you are amazing!! I will be ordering a few from you and when i go snowboarding in Sweden i will be bringing a good bottle of rum to kill together

[@2STROKESTUFFING]

+Chris creations Awesome!

[@frankg3278]

Excellent. I want one of these boards. I'm assuming a 5vdc magnetic senor will work? Could it be higher, like 24vdc?

[@frankg3278]

I read the instructions... Got a sensor on order!

[@jeffbluejets2626]

What software did you use to make the PCB files......... downloaded ok but thought they were Eagle files and EDA will not open them. Thanks Jorgo

[@RogueBro]

Can you please send me the files for the pcb board. I will pay. Please.

[@kacgorazd]

Hello, has a second shipment of ARDYNO already arrived, so i can buy one. Please let me know. Thanks.

[@2STROKESTUFFING]

Still waiting, should be here before Christmas.

[@kacgorazd]

2STROKE STUFFING thank you for the answer. I will wait.

[@flavioenzovisona3726]

Hy! How to buy ardyno? Please give me a contact

[@patricioromerohidalgo1615]

Que peso y medidas tiene el rodillo del banco de potencia

[@whypedal3736]

MAN! I want one! Id love to chat more about the set up to!

[@EJProMods]

Have You try to contact DamoRC for software update or not compiled program files for editing like early versions was uploaded? Forum looks like dead and project stooped for few years.

[@2STROKESTUFFING]

+Edvinas J. Yeah, sadly he's not supporting it any more, and the forum is pretty much dead. Source is available though, and Simpledyno will live on!

[@EJProMods]

Yes but source files not uploaded any more, so I cant edit program it self. Some people have saved these files but do not want to share.

[@2STROKESTUFFING]

+Edvinas J. You're in luck! Damo reuploaded the source this november!

[@EJProMods]

Great ! I was stop checking that :D

[@2STROKESTUFFING]

+Edvinas J. Me too, was so excited when I saw it!

[@mitchelletorres2399]

Hou to order

[@gwo7610]

when are we going to get some more videos on the powered bike?? :)

[@2STROKESTUFFING]

+Guy Osgerby Soon! Probably next video!

[@gwo7610]

good good, best content yet :)

[@verisgarage988]

Hi! I know that it's very old topic, but... someone know where i can get ardyno pcb? I'm from Poland, and i think in my country this would be problem to find it, so if someone know the web shop, where i can get that pcb it would be great! Regards!

[@steveclee565]

Which channel would you monitor to see the engine rpm input?

[@Alesidbi]

do you have still any pcb for sell

[@Rideaholic069]

I must repeat myself. You have absolutely no formal training or degree ??? That is friggin amazing you are so intelligent ! I sir am very impressed. I am sorry I keep referring to you as "you" I just never got your name. Sorry.

[@2STROKESTUFFING]

+Mark Durham haha, thanks man! The name is Alex

[@aaronmarzec2018]

Never confuse education for intelligence.

[@jackphoenix5253]

where is 2strokestuffing located

[@2STROKESTUFFING]

+jack phoenix Norway.

[@vinzdukyo1320]

Hi what ecu cdi using that you advance the timing?

[@kacgorazd]

Hey there. I have send you question about ardyno on your mail. Im just not sure if you seen it. Could you please let me know when can i get an Ardyno board. Thanks a lot. :)

[@2STROKESTUFFING]

Sorry, my inbox is a mess... Have I replied?

[@kacgorazd]

2STROKE STUFFING Hey. No you have not replied. I would be glad if you do because i realy need ardyno to complete my project. Like i said if you perhaps have one shield left at home if you have it soldered is even better. I Will pay the price and donate . No problem. please help me. Thank you.

[@bps.1]

i need a board and all the parts needed to make that dyno circut board

[@2STROKESTUFFING]

+SHANE DICOCHEA Selling bare PCBs only, sorry. But there's a partslist and all components are readily available.

[@angerminsk]

@@2STROKESTUFFING i cant find the pcb files and partlist, can u help

[@angerminsk]

@@2STROKESTUFFING i finded an partlist, but zip file with pcb isnt downloadble

[@Phenx]

Cool project!! Is the boards still available? Also, may I use with a eddy current dyno? My university bought a dyno some years ago but some time after, the company went bankruptcy.. so we have a dyno which do not work and do not have any available schematics 😂, if your project applies to it, it will be very helpful. Thanks

[@2STROKESTUFFING]

Thanks! Available, but currently out of stock. Won't work with an eddy current dyno, sorry.

[@thiswillprobhrt]

The original download link for Simpledyno is broken, but you can get it from Github here: github.com/pulsatemedia/SimpleDyno

[@sbpower123]

I would like to buy one.I also want to buy some extended support I want to build a test stand for atv motors and other motors.0 - 200 hp.I do the fab work only need your direction.Thank you.

[@twistedstormy22]

Are you still making the complete boards? I’d like to buy one if possible $

[@bps.1]

Can you send me the link for all the parts I would need to make the board work

[@2STROKESTUFFING]

+SHANE DICOCHEA Go to Sparkfun.com and search for the components in the partslist. I'll see if I have time to add some links later.

[@jrzx10r]

R u still selling these?

[@Sw2ncXMixos]

Can we measure cars too with that software????

[@2STROKESTUFFING]

+Mixalis Paoktsis Yep!

[@Sw2ncXMixos]

Ok then I will need one of those pcb’s 😁😁😁

[@upsidedowndog1256]

How much horsepower can your setup measure?

[@2STROKESTUFFING]

+upside downdog Infinite for the Ardyno shield, about 80-90hp for my dyno.

[@janhendrikfranke]

10 bucks isn't too cheap, but if I'll diy a dyno I'll be happy to buy your pcb!

[@2STROKESTUFFING]

+Jan Hendrik Franke Great!

[@re-clone-cy-kick3266]

Hi are you still selling the boards?

[@HeLLfaNMC]

Email sent.I'm so excited about starting this project

[@alfiolocatelli5093]

Also me one year ago but never had an answer back

[@2STROKESTUFFING]

Really sorry about that! Hard to keep up. Unfortunately I have no more cards in stock, and I'm struggling with finding the time to do order handling, shipping etc. Here's a link to the files, you can use them to get the card manufactured at your pcb supplier of choice(not expensive at all for just a few) drive.google.com/file/d/0B51yUCR0gADEUTEySzBfelZUSVlvV1pSN2FPdUo3MnZRRTJB/view?usp=drivesdk

[@alfiolocatelli5093]

@@2STROKESTUFFING No worries! At least now I know why. Thanks a lot for the link!

[@himaliadhikari7316]

Do any of you have the ardyno files ? Please let me know

[@nicholasstark536]

Do you still have these for sale?

[@armenariadanly4181]

Can I request the schematics for ardyno bro?

[@2STROKESTUFFING]

Ardyno.weebly.com

[@lukecardinal8129]

Interested in one of your boards Sir when you have time let me no

[@KevinTodd]

I will be getting one soon

[@2STROKESTUFFING]

+Kevin Todd Awesome!

[@nguyenvietfly3906]

can you give me the code ? thank

[@kacgorazd]

Hi. I have just sent you a mail for ordering Ardyno. Please respond. Great job. I have watched everything about 2 stroke. My idol :)

[@2STROKESTUFFING]

Thanks man!

[@trianggaindralukmana2184]

you still sell it?

[@mbuchithiani9474]

Hi ... very interested in this board .... excellent work !!!

[@nikolaiownz]

o wish i where smart hehehe.. would love to build a motorcycle dyno some day :)

[@2STROKESTUFFING]

+nikolaiownz You can do it!

[@RogueBro]

Can anyone help me get the files for it I will pay.

[@oscartena6299]

You are the Fucking Boss !!!!!!!!!!!!! When i have money i will be your sponsor. Thanks from La Coruña, SPAIN.

[@MrRevspeed]

Shipping to malaysia

[@kleisie]

Several weeks ago I sent you an email to order an arduino shield. Until now I have not had any reply. Have you perhaps missed my e-mail? I hope to hear from you soon.

[@2STROKESTUFFING]

Sorry man, must have gotten buried. Unfortunately I have no more cards in stock, and I'm struggling with finding the time to do order handling, shipping etc. Here's a link to the files, you can use them to get the card manufactured at your pcb supplier of choice(not expensive at all for just a few) drive.google.com/file/d/0B51yUCR0gADEUTEySzBfelZUSVlvV1pSN2FPdUo3MnZRRTJB/view?usp=drivesdk A small donation would be much appreciated! PayPal to [e-mail] Alex

[@DerKrawallkeks]

I like the name;)

[@2STROKESTUFFING]

+DerKrawallkeks Thanks!

[@trevormcd8541]

Hey mate I sent you an email about your ardyno board. Keen to build a dyno with your pcb 😁 happy to pay postage to Australia. Please reply 👍

[@MrSlehofer]

hello your email isn't working, probably overflow, here is the error code: 5.0.0 smtp; 555 5.5.2 Syntax error. v88si3432171wrb.256 - gsmtp

[@2STROKESTUFFING]

+MrSlehofer Weird. KZbin analytics is down too, might be trouble at google atm.

[@MrSlehofer]

ok, anyways I'll try later, I'd like to order

[@2STROKESTUFFING]

+MrSlehofer 👍

[@ryand7415]

I'd like to find one of the pcb boards. If anyone has one they would be willing to sell name your price and I'll buy it!

[@Antoalfia]

Good

[@kushaldeokar9780]

Hi .I've sent a mail for ordering . Please respond Great work man .thanks for sharing this with us

[@larsaarup9609]

Nice projekt have send you an E-mail 😀👍

[@andreavalente4159]

Email sent. Waiting for your answer .

[@Aarup-mc]

Hi send you an Email I like some of these PCB, Have plenty of time "CORONA STAY HOME PROJECT"