Fixing and sharpening chipped Shun on DMT dousharp. Exclusive updates, news, & content burrfection.com/
Пікірлер: 90
@mikecofrin85283 жыл бұрын
Thanks for the video! I was thrilled to hear your speedskating story. Back in the 90s I managed the relationship between DMT and the US Speedskating Team which is where I got the stones that I still use to this day.
@sanctufilms5 жыл бұрын
Glad to see you doing an instruction/review video again. These are what drew me to your channel. I hope you will further compare the Atoma and DMT plates as you hinted. It would not hurt to revisit some of the old topics to catch up on what has changed.
@dimmacommunication5 жыл бұрын
The biggest surprise is that my chinese diamond plates worked better than my ultra small DMTs 😦 ( the super small plates to sharpen skates etc ...)
@leonardwells96135 жыл бұрын
That Dans black translucent surgical stone gives me such INCREDIBLE feedback, I feel that all others are just a point of diminishing returns, better perhaps but such a SMALL ant better for usually WAY more miner. I learned this from you Ryky,keep it high quality and simple and your expertise will grow ! Leonard
@themadscientest3 жыл бұрын
I have a fine DMT bench stone and love it, use it on almost everything I own and I'm slowly getting more and more sharpening equipment as I learn how to maintain my cutlery.
@biancac.99755 жыл бұрын
Speed skater! You never stop surprising 🙂 I still can't get over your huge cotton and dust, I'm speachless. It's spectacular
@braheemnyc54705 жыл бұрын
Thank you for all the great videos
@joshperdue41575 жыл бұрын
Nice video as always. I see a spyderco fine grit ceramic on your block. Looking forward to your thoughts on this stone. Solid work!!!!!
@kurtc32545 жыл бұрын
Thanks for posting this great info!
@SurvivorDiet5 жыл бұрын
Thanks for your great videos - I have a question for you... I have a Shun Rocker knife and I love getting it super sharp following your techniques (after getting a nice new Chosera 800 Grit Stone). My problem is KEEPING it sharp. I'm careful what I cut but it seems to lose its sharpness rather quickly. I was wondering if there is something else I can do to keep it really sharp between uses. I find that I let it go for a while and then when it gets dull, I sharpen it again it takes me like 30 minutes to really get it sharp again. Thanks! Can't wait to get your knife when it's ready. I ordered one the first week it was available.
@ciachef965 жыл бұрын
Awesome video!! Greatly appreciated!!! Shun has their own steel, would you recommend it??
@shayhershko4 жыл бұрын
Thanks for another great video! One question- im a chef and I want to to replace my whetstones for a set of diamond sharpening plates like the DMT. Should I get the dia-sharp or the dou-sharp?
@Albertcortes665 жыл бұрын
Hey for some I’ve been into sharping knife, the best meditation I’ve done in my life. I have wet stone and now. Later my G great channel
@Timothius825 жыл бұрын
I've fixed a bunch of knives on that same stone, works great for me.
@CynBH5 жыл бұрын
I'd love to see a video of you sharpening skates! I think it would be very interesting!
@StarBuck4115 жыл бұрын
What was the name of the stone that you said was your normal go to stone for doing repairs like that? TKs
@defaultzenabled42615 жыл бұрын
Can you do a video sharpening D2 steel? I cant get mine as sharp as i want i know my stone can get a knife hair shaving sharp
@bruschi81484 жыл бұрын
What are your thoughts on the apex sharpening systems or the knockoffs?
@footsorebird03652 жыл бұрын
Could you review the DMT Díasharp plates? I love my course plate and with my DMT 160 grit lapping plate I can reprofile and sharpen any knife. But I was wondering what you thought of them and how good the extra fine (1300 grit) stone is.
@peter-radiantpipes28004 жыл бұрын
I’ve done a dozen shun chipped blades using diamond plates this week. I’ve just been on a kick with them lately. I’m not going to compare in this comment but It did the job and they came out great. Several hours of work. As Carter says, it’s 99% technique and 1 % tools. Maybe I’d say 90 or 95% but it really is practice makes perfect
@fernandokelvianto97885 жыл бұрын
#asking , rick can you tell / make a video what material water stone or sharping stone they use ? , what the differnt Aluminum oxide / Silicon carbide ??
@perrybennett72614 жыл бұрын
I have recently purchased a Shun Premier 8' Chef knife. I am wondering if it is true that Japanese knife manufactures put a vinyl clear coating on their blades for shipment and how to tell if they do. Do I need to take Acetone to my blade to remove this coating if it is even on the blade. Anyone know the answer to this. I am skeptical becuase I dont want to do any damage to the handle.
@need_more_ultisinsta30993 жыл бұрын
Yoooooooo I'm a speedskater too! Just found your chanel. Where did you skate at? At what level did you get to?
@1erinjames5 жыл бұрын
Is there a really affordable sharpening stone/plate that oil wont clog? Are axe files too corse for sharpening knives?
@dimmacommunication5 жыл бұрын
I bought a long time ago 2$ diamond plates that worked like a charm on Aliexpress
@dirkh21222 жыл бұрын
Thanks for sharing your opinions on the DMT! Not sure if you will check any comments on such an older video but I was wondering if you ever did a review of the red/green DMT plates for sharpening? Wasn't able to find it. There is a German KZbin chanel (and cutlery) posting quiet a bit on sharpening and they strongly promote DMT products (not sure if I can name them here without this looking like SPAM). Anyway, would be really neat to have your opinion on sharpening (all to the end) with DMT plates!! Sorry in case I missed any existing content on this.
@ThrowingItAway5 жыл бұрын
I have the DMT diasharp continuous surface stones and they are awesome at working with high alloy steels. They remove material very quickly and it doesn't take a lot of time or effort to maintain my edges. They do take about a dozen sharpening sessions to break in as there's some high diamond particles that need to be knocked off. So expect some deeper scratching until they are worn in and try your best to cover the whole plate during the break in period.
@ElonaldTrusk7 ай бұрын
One thing to consider with diamond plates/stones and "grit size"... A smaller grit size can create a larger scratch pattern if its loaded onto a surface rather than suspended in resin or another medium. So fine plates might cut faster than medium resin bonded stones. Doesnt mean they dony have their place, but it is definitely something to consider.
@pieryese5 жыл бұрын
Great video again! Where do you buy these knives? And are there possibilities for us to buy these as well?
@flybyairplane35285 жыл бұрын
Pier Melis he DOES TELL YOU WHERE, apparently you don’t know how to see all those goodies, ANY YT video, there is a tiny ^ over the right side, just touch this, then you will see the date, and a leading to ALL the products, Cheers from NJ
@pieryese5 жыл бұрын
@@flybyairplane3528 I know the links to all kinds of products are put in the description. But I do not see a single link to a website where I can buy broken 1$ knives.
@TylrVncnt Жыл бұрын
Hiiiiighly recommend trying to sharpen a knife on the DMT coarse side (blue) and then stropping, it creates a ridicccculously keen edge, much better than their fine or extra fine etc, which is very surprising… but they realllly nailed distribution of the grit on their coarse stone formula, it’s insane
@emmettgallagher6090 Жыл бұрын
So you think a coarse/fine combo is better than a fine/extra fine one? Thinking of buying a 2-sided one as a go-to (first) stone.
@leonardwells96135 жыл бұрын
QUESTION..... WHY DON’T YOU CHOSE THE DMT 10 X 4 series for your plates, then drop down to a Dans hard translucent surgical stone 12 x 3 X 1. Given the knives you sharpen I can’t fully imaging why not unless they are not course enough. Their surface area is unsurpassed for larger knives. Just wondering. Personally I do not care for the perforated coated surface of your topic plate, too much surface area not diamond coated, no advantage I can see to that. But you always keep it interesting. Leonard
@craigsayer87105 жыл бұрын
I hate these plates your better of getting atoma plates similar price range or quality stones
@fargoththemoonsugarmaniac Жыл бұрын
@@craigsayer8710 could you elaborate on that in more detail please?
@jbauerlein0075 жыл бұрын
Do you use plats to fix knives? Or can/do you also use low grit stones???
@Uncle_Red5 жыл бұрын
Either will work
@dis825 жыл бұрын
How did he get all those broken knives? Thx
@alliezz15 жыл бұрын
He fix them professional i think.
@PhuVet Жыл бұрын
Got the like just for your channel name.
@ps.60234 жыл бұрын
ha as a former speed skater myself Im so glad to know Im not the only one who is familiar with sharpening with DMTs for skates but not what they were made for which is knives. I have a Red(600mesh fine )/blue( 325mesh corse) plate I may just get a holder for it and use that because I was thinking of going for a Cerax 1000.
@Burrfection4 жыл бұрын
right on. bet you are a better sharpener than i am. love the cerax 1k. still have the original one i bought when i started the channel. in case you needed one. bur.re/cerax
@ps.60234 жыл бұрын
Sharpening speed skate blades Im ok, knives are a diffrent story due to the being able to find the burr on speed skate blades are much easier. Also for me it was easier to sharpen because all I had to do was manipulate the stone and not the blade itself and I was told by my coaches that when using a diamond stone since they take off so much put VERY little pressure on the stone. So the technique is much diffrent for me with knife sharpening because i have to hold my blade itself and make sure the stone is stable. thankful for your page. Its pretty much all i use in regards to knife sharpening. I am a bit confused on if I need a #800 stone and the Cerax 1000 for everyday use or would just the #1000 be good. Im a home cook so Im not cooking intensly or using my knives that much .
@ps.60234 жыл бұрын
@@Burrfection also was wondering when you skated, what boot maker did you have? mine were bont but then due to fitment issues I went with Bruce Kohen. Apollo Ohno's maker, hes quite amazing, his boots are a work of art. All entirley hand made by him in a tiny studio in Missouri.
@Burrfection4 жыл бұрын
Cerax 1k if you like soaking , naniwa pro 800 if you like non soaking store.burrfection.com/products/suehiro-cerax-1010-whetstone
@Burrfection4 жыл бұрын
A polishing stone would help but if not, they are good enough on their own.
@shaneintegra4 жыл бұрын
You should review DMT's 8,000 grit stone
@Chef626Armando5 жыл бұрын
Nice
@jamesbrown-pk2do5 жыл бұрын
hooray, DMT at last!
@jjb77085 жыл бұрын
Any opinions on yoshiro cutlery knives?
@dougennis86895 жыл бұрын
I'm a chef and use a yoshiri gyuto, good knife
@jjb77085 жыл бұрын
Yeah I have the vg10 16 layer Damascus steel knife and I like it a lot but I don't have a lot of experience with different knives to know the difference
@nicobisten98575 жыл бұрын
When comes the Global knife review?
@Beliserius15 жыл бұрын
or victorinox
@dimmacommunication5 жыл бұрын
@@Beliserius1 Nothing special about the victorinox , just a basic 420 aisi steel , super soft and can't be even compared to a Japanese steel. I own one :) , they are good kitchen knives for families etc
@Beliserius15 жыл бұрын
@@dimmacommunication I know, but like 2 years ago he said he wanted to prove America's test kitchen wrong. Plus, I dont think japanese or higher carbon steels are necessarily better. Imho, for 90% of tasks, especially with a chef knife, 0.5%-0.7% carbon is perfect. Going higher like Shun and you'll get a chippy edge, go lower like lower end Mercer and you'll have to sharpen too frequently.
@dimmacommunication5 жыл бұрын
@@Beliserius1 True, if you need a steel like 420 I would advise Sanelli, Italian quality made. Better than Victorinox for sure :) ( own both and a japanese ).
@Beliserius15 жыл бұрын
@@dimmacommunication Honestly, I think Victorinox is a bit over priced for what they provide. 0.5% carbon steel knives, 420HC type, are available from companies like Winco for a fraction of the cost. I've also had great luck buying 0.7% carbon knives from China for even less than that. I have sharpened a few Shuns, MACs, and Globals. While globals are great in terms of workmanship, their handles aren't my thing. MACs and Shuns on the other hand don't have great workmanship imo, far worse than Wusthof. The wooden handles don't sit flush with the enc cap on Shuns, and MACs just felt like a pretty average for a forged knife.
@PrimordialSoup15 жыл бұрын
Don't take dmt when playing with knives kids.
@TG222225 жыл бұрын
You'll probably drop the knife. Don't want to chip it.
@michaelvonhaven1055 жыл бұрын
You'll probably drop onto the knife. Don't want to stab your brain.
@SgtMars2 жыл бұрын
Joe Rogan has entered the chat.
@ElonaldTrusk7 ай бұрын
Cpm-Dmt2 😂
@dimmacommunication5 жыл бұрын
I have cheap 2$ chinese diamond plates that works like a champion , too bad they aren't on sale anymore 😅
@fischX5 жыл бұрын
Slightly disappointed that no psychedelics where involved ;-)
@Brew785 жыл бұрын
Haha, my first thought scanning my feed was "I dunno if handling knives is the best idea on DMT". I'm sure Rogan would love to do a podcast on it though 🤣
@uncleouch97955 жыл бұрын
A plate is a stone for all intended purpose. Plus they stay flat, a stone needs redressed regularly. Your right, the Aluminum ones will wear away. Especially if used regularly. I used to use them as a replacement for Arato. To remove rust and chips on Swords. So I am speaking from the Hard use perspective.
@fargoththemoonsugarmaniac Жыл бұрын
which ones do you mean by the aluminum ones? these in the video? or plates from other brands altogether?
@johnsmith-dm2tq5 жыл бұрын
off subject, how do you pronounce mcusta? m....custa, mcsta with no u?
@Burrfection5 жыл бұрын
m.... custa
@robboss18395 жыл бұрын
“I have experience with DMT back into the 90’s” Joe Rogan has entreated the chat
@jimihenrik113 жыл бұрын
That's was disappointing to watch. I didn't see the chip removed.
@flybyairplane35285 жыл бұрын
I have had a rod type diamond stone I’ve used for years for my pocket knives etc, go,t a chip, on a GOOD. Glass? This rod will clean it up. Cheers from NJ
@guilhermegarbim19425 жыл бұрын
global knifes pleaseeeee!!
@andrewb8548 Жыл бұрын
Just buy the DMT base, it's only $10 if you get the plate with base.
@evgeniy7sot5 жыл бұрын
it would be cool if there were subtitles in Russian 😁
@jasonerickson18675 жыл бұрын
Need to go see a barber bro
@wfjr9978 ай бұрын
Plates seem to be a waste of money to me.
@TurboLoveTrain8 ай бұрын
Trend: Dual sided 900/1000 DMT basically glues the diamonds to the surface. Trend embeds them in tungsten--the blocks last almost forever.
@Maxime-ho9iv5 жыл бұрын
So nobody noticed you didn't even show what was the repair on this fucking knife?
@AnonZero05 жыл бұрын
*Your short videos--are not really worth watching.*