Are you using the Multi-Pads on Yamaha Tyros 5?

This is for a used Yamaha Tyros 5 (61 or 76) with speakers, 2 year warranty and free UK delivery.
Call us today on 01295 266788 to order yours.
David Cooper and Chris Hammond are the Tyros Tipsters and regularly upload videos showing you new tips and tricks for your Yamaha Tyros keyboard.
Browse our huge selection of preowned pianos, keyboards and organs here:
www.epianos.co.uk/used-digita...
www.epianos.co.uk/used-keyboards
Get in touch with us either by phone on 01295 266788 or email [e-mail]

[@andersandersson3065]

Thank you for your very good and clear explonation . Both of you are perfect persons for this job.

[@przwll]

didn't realise about the sync start on the multipads-thanks very much

[@PepperGeorge]

Thanks for these videos, I hope you keep making more and more

[@bestrickie2]

Very good as always Dave.

[@PhilW222]

I’ve also used them to write added parts for a rhythm, it’s not too difficult to create new ones which makes it very flexible.

[@josepoveda9496]

Thanks for your help and suggestions you are fantastic. Muchas gracias.

[@alfredborg1]

Good one Dave Thanks I like that

[@Anonymous-vc6ml]

Thank you so much... Very helpful 👍

[@ottokueng4236]

Verry helpful and good explained. Thank you.

[@RasikaWickramage]

Really Great Videos!!

[@badaljan]

That was very helpful Thanks

[@jameskaptain7831]

That's great thanks never knew that.

[@ROBERTELECTRIC1]

All the videos are amazing. I own a PSRA 3000, but still these videos are very helpful. Thank you.

[@philliptorrence1810]

Se

[@philliptorrence1810]

0pp0p

[@ChrisOnTheKeys]

Just brought a Tyros 5 and it's amazing, keep these vids coming. Can you show how to write a song and record it?

[@lordbachus]

Multi pads really changed the way i use arrangers, wish there where 8 or 16, superb for trance and dance music

[@GreenBoy9000]

Hmmm... I don't know... Most MIDI devices can support a maximum of 16 channels with 10 always reserved for drums. Right 1: Channel 1 Left: Channel 2 Right 2: Channel 3 Right 3: Channel 4 Multipad 1: Channel 5 Multipad 2: Channel 6 Multipad 3: Channel 7 Multipad 4: Channel 8 Style: Rhythm 1: Channel 9 Rhythm 2: Channel 10 Bass: Channel 11 Chord 1: Channel 12 Chord 2: Channel 13 Pad: Channel 14 Phrase 1: Channel 15 Phrase 2: Channel 16 That probably explains why there are only four multipads. If this supported 32 channels, then I think 8 or 16 might be a possibility. I don't know.

[@moadot720]

1. George Greener. 2. Did someone say "trance and dance music"?!?! 3. What does things like "Right 2: Channel 4" or "Left 3: Channel 1" mean???? I'm guessing "Right" and "Left" refer to the hands commonly used for playing certain parts (Left for lower bass notes and Right for higher melody parts), but I have no idea how MIDI channels work... ...Sorry if I'm asking you to many questions, but I want to know because I look up to you! Though you shouldn't be angry at me for not knowing this because yOU'RE oLDER tHAN mE AND I CAN'T JUST BE 15 LIKE YOU OR EVEN 13!!!! I HATE NOT LOVING YOU!!!!

[@norbertf5815]

Very useful - thanks 🙏

[@felixfernando9767]

Could you please able to show us how to create breaks and fillings please thanks

[@MusGuitsdsd]

Thanks David for your suggestions. But I still have a question about this: Yamaha already brings multipads associated with styles. How can I change a multipad in a style without being via Registration Memory, doing like yamaha?

[@naldinhomundoanimal839]

Meu sonho é um desses

[@felixfernando9767]

How to insert new things in multi pad ,thanks

[@ZeitrissFly]

Hi David and Chris, could you find out, if it is possible to store parts of a song (as wave or MP3 files) to use it later in connection with the multi-pads feature and in case it is so, could you explain it. Thanks in advance.

[@mapoyacab5567]

Thank you because I was wondering what they are there for lol

[@lgvdbroek]

HI, In this video (3.34) you said that some MP's are single and some are playing continous. Where can I change that MP setting ? There are some MP's playing single and I want to change that in continous mode.

[@allezegains3293]

I've been racking my brain trying to record a guitar backing multi pad! No quantize, loop define, nor overdub features? How does Yamaha record their factory m.pads? It takes forever to try and get a decent loop, then when I get something useable the chord tracker is all over the place (e.g., C maj sounds normal, but F maj sounds like it's an octave higher, and A minor sounds too low! 7th and other colorful chords won't even register) . I'd tried to out smart the keyboard and just duplicate the notes from a factory multi pad, but all that registers in the edit menu are E2, F2, G2, A2, B2 backward and forward in succession ! How does that translate to chords?any help?

[@ALAINBEM]

I have a tyros 3 wanted to know how I get my multipad to synchronise with the chord I play ….sometimes it work ….

[@jameskaptain7831]

How do you reset transpose when it's not working?

[@ALAINBEM]

I wanted to know how I get the multipad to follow the chords I played ,…..any help out there ?

[@josephgishomasirika4281]

HI there! How can I get a Tyros 5, 76 keys to be shipped to Cape Town South Africa?

[@jeffdurham1825]

David, thanks for your many videos and comments very helpful, appreciate your efforts , I bought a Tyros5 keyboard in Indonesia , along with the matched trs5 mso5 speakers, the keyboard is dual voltage, 110 or 220 50/60 cycle, however I checked the MS05 speakers, and only shows designed for 220v power. I am in the USA now , 110 v / 60 hz, if speakers are only good for 220v 50 cycle, can i buy a power transformer to get stepped down from 220 v to 110 v and what about the frequency 50 hz up to 60 hz, or I presume I can buy MS 05 matching speakers in 110 v / 60 cycle , Any advice from you would help or anyone , If necessary I will buy 110v MS05 speakers , but wanted to check first as I love my Tyros5 keyboard and want to get it fired up asap. Thanks again --Jeff in Oklahaom now.

[@juliodcunha193]

Can we play multy pads from usb or do we have to store it on keyboards to use these for a particular style?

[@edwardc7462]

A round of applause It’s a bit self serving don’t you think 😂😂😂😂

[@GreenBoy9000]

Does that have the Roland SC-88Pro Small Club sound on there? It's like a type of applause you'd find on the SC-88Pro.

[@tomschaffner9704]

Don’t b an ass

[@michelleguzman8280]

Can we change on spanish

[@petercousins1645]

I'd be glad if you could tell me how to get Hank Marvin 'Shadows' lead guitar sound. thanks Peter

[@tyrostipsters]

Thanks Peter - We send out new guides, tips & tricks, demonstrations etc in our regular e-newsletter. You can sign up for free here: www.epianos.co.uk/newsletter/

[@petercousins1645]

@@tyrostipsters I tried the multipad control but could'nt get anywhere near Hanks sound but have ordered & recieved a download, but don't know how to install it, but the chap at Allegro music is going to put it onto memory stick for me & help me install it(I tried multi pad control could'nt find any guitar sound like it)can you advise me which powerpack would be most suitable for outdoor use: 150 hour watt of electric rated 100w A/C modified sine wave inverter or 444 watt hour rated 450w A/C sine wave converter(this one more ££££s)

[@mylientran4327]

WOULD YOU PLEASE SHOW ME A DEMO HOW TO SET A BALL ROOM STYLE SUCH AS CHACHACHA, MAMBO, RHUMBA, BOLERO, TANGO.......IT'LL BE GREAT. MILLION THANKS IN ADVANCE.

[@robfriedrich2822]

When I play "Tequila" I use multi pads for playing the "Tequila" saying or shouting.

[@pianoman1379]

Hi Tyros Tipsters - On my Tyros 5 I want to program the Multipads with a few recorded piano notes when needed but after the multi-pads have been assigned for live performance, is it possible to alter tempo for their use in case the band plays a bit faster?

[@djray2006]

How do you set the multi pads to have a voice of a singer like Céline Dion or other artist and we make the accompagnement and the real voice sing i have tyros 4 and 5 its look funny to do i see that in a démonstration, i write to you from Canada hope you have time to answer

[@lvs1211]

When I use a multi pad in a registration memory, I can't make it to stop when I choose another registration. If I use multi pad 1 in registration memory 1 and want to change it to multipad 3 in registration memory 2, the multi pad 1 keeps playing along with multi pad 3. How can I stop the first and only play with the second? Otherwise it's a great way to improve styles.

[@tyrostipsters]

I think this will be possible; it would require you to alter the multi pad setting to NOT loop around first, and then save to registrations.

[@lgvdbroek]

Hold the stop button and then press the MP you want to stop. The other MP's will continue

[@lvs1211]

That is an option, but I play the keyboard from an accordeon, so I am not near the stop button. I change registration by a multi-pedal.

[@neiljosephbennett9119]

Video quality is piss poor. My head hurts ....... mount the camera on a tripod next time!

[@snoolee7950]

so. much. talk.

[@kaiwenwu1947]

Hi do you have anything that shows how to multie tracking on tyros 5 ? As I'm so used to my psr 6700 which is awesome for this especially with reggae , picking any of the backings. And altering any instrument for any other even doing own drums for reggae timing. ( Which the Japanese are hopeless at ) all done in key of C. And then when sorted. One can use it with breaks , adjust mix, in any key as you play. Please help.