Argon One M.2 Raspberry Pi Case - SSD on your Pi 4!

The Argon One has been a popular case for the Raspberry Pi 4 model B. The newer M.2 version of the case adds a new trick: a built-in SSD slot inside the case!
There are some caveats and things to watch out for, but watch this video to see my recommendations.
Support me on Patreon: / geerlingguy
Sponsor me on GitHub: github.com/sponsors/geerlingguy
Mentioned in this video (Amazon links are affiliate links):
- Argon One M.2: amzn.to/2NhOFhh
- Argon One M.2 (upgrade): amzn.to/2MVERJy
- Kingston A400 SATA SSD: amzn.to/36IWraS
Blog post version of this video: www.jeffgeerling.com/blog/202...
#ArgonOne #RaspberryPi
Contents:
00:00 - Introduction
00:29 - Hardware overview
02:22 - M.2 SSD Adapter
04:56 - SSD Performance
06:22 - Cooling Performance
07:33 - Fan, IR, Power Control
08:42 - Recommendations
09:31 - Bloopers

[@JeffGeerling]

What's your favorite Pi 4 case? Mine is still currently the Flirc, but the Argon One M.2 is a very close second.

[@sarabjeetseehra7287]

I actually just got this earlier this week. The temperatures are amazing, but I am not a huge fan of the poor access to the microsd card. However, I have been booting from my sata ssd in the case.

[@DiomedesDominguez]

I prefer to 3d printing one

[@GrigLarson]

I am a fan of the "acrylic plate with the standoff screw nuts," usually because of the cooling factor, stackability, and accessibility. Also, a bunch of Pis fastened together adds weight, which is a HUGE problem I have with all the SBCs, USB devices, or modern peripherals (like cheap switches or even mini-monitors) that are so light, the *weight or stiffness of the cord it's attached to* will drag it somewhere (like the floor where all my pet hair colonies aggregate) just with standard Earth gravity (disclaimer: have not tried it with any other gravity). The one that you can get for the Pine RockPro64 is DAMN sexy. And, thankfully, heavier.

[@GrigLarson]

I have considered using weak magnets to attach some of these to a metal plate. Not strong enough to interfere with the computer or the fans, but strong enough to hold a light SBC. My roommate uses these hook-and-loop "Velcro-ish" 3M Command strips, which she attaches small and lightweight peripherals to the *underside* of her shelving units. I might also give that a try, since I won't have to get a metal plate, it's less expensive than magnets, and I get "more space" in my shelving.

[@MightYoungJoe]

$35 for a Pi4 and $40 for a case ....hmmmmmmmmmm

[@markh3684]

"Now is the time I really need the water I forgot"... Jeff, I really enjoy your videos and the bloopers are always an extra little cherry on top

[@CarneSagrado]

Yeah! sometimes I enjoy it more than the actual topic 😂😂😂

[@popcorny007]

Hi Jeff! If an M.2 has two notches, it's sata. If an M.2 has only one notch, it's NVMe. There are very, very few exceptions to this rule. One exception would be NVMe x2 drives found in laptops that may also have two notches. But, you as a consumer aren't meant to see/upgrade these yourself. If you're buying an M.2 online or in a store, you can safely follow this rule.

[@jayp8078]

You saved my life! I was just about to order a nVME for mine. After learning this, it's surprising how scarse are SATA m2 SSDs in the market. The bigger that I found in stock was a Western Digital of 2TB so it was my only choice.

[@CptPatch]

When you say "Until next time, I'm Jeff Geerling." it makes me wonder... who will you be next time?

[@notsonominal]

keep thinking the same!

[@JeffGeerling]

Who indeed!

[@GrigLarson]

This is to distance himself and his brand from Red Shirt Jeff, whose popular videos include "How to bypass a 20amp Circuit with Foil" and "Flamethrower Your Way to Fitness."

[@elmonte5lim]

Ambiguity, is the spice of death!?

[@AnotherNerdHere]

And here I thought *I was* Jeff Geerling 🤤

[@JeronimoAvelarFilho]

Nice analysis. The note about the ssd to use, saved me the cost and time of finding the correct one.

[@Stefan_Wouters]

I've been using the Argon One M.2 as my side PC, mostly while teaching my son to use his new RPi 400. Just thought it was fair to have equal computing power to him so I could see what his computer is capable of before making any promises. I'm amazed at how far the Pi has come in terms of desktop usability. I can even work on some of my smaller programming projects without significant issue. In the past, overheating was always an issue I ran into when using the Pi extensively... this has not happened in the past month. This case is a really nice (and good looking) solution. I'm using a WD Blue 1TB SATA M.2 drive... mostly because I saw it used in another Argon One M.2 review video, so I knew it was compatible before spending my money on it. The SSD makes all the difference in getting work done. I'm also less worried about data loss. A nice trick: If you use a male USB-A to male USB-A cable, you can use it as an external drive on another PC and quickly copy files from/to your Pi. As a solution to the lack of space on the top port, I have connected a powered USB-C hub to my case. Overall, this case was well worth the price for my use case. --- Great video as usual, keep up the good work. :-)

[@Pekeliini]

The SATA-USB3-chip this case has is actually one of the few ones that actually support UASP with Rasp. A lot of of them "support" UASP but when used with Pi, they give terrible performance. I actually held off buying this case until I was able to confirm that this case has the same chip as the Inanteck case you used in your testing.

[@trueriver1950]

Thanks & liked. That's really helpful feedback to others considering SSDs

[@nate6692]

I still can't get it working even with usb-storage.quirks. I even tried booting from SD (thinking maybe it wasn't working since cmdline.txt was on a partition on the quirky controller)

[@trueriver1950]

0:48 Stacking passively cooled computers sounds like a *bad* idea to me. There is less surface area exposed for use as a heat sink 7:01 especially once you notice how much of the heat is disappeared through the roof. They may even have deliberately slanted the top to discourage such stacking

[@wastingtime9152]

Mine works great. The usb adapter was faulty but amazon replaced the whole package with a new one. I boot from the SATA SSD with no issue. Great video!

[@jwoolson]

Thank you, Jeff. You answered all my Argon M.2 questions. Ordering from your affiliate links. Cheers!

[@keithmiller9665]

Thanks Jeff, really very interesting. I love my FLIRC cases with their metal passive cooling and so I will stick with them, but it great to learn about alternatives. Cheers.

[@geko1098]

The existing version of this case has been, hands down, my favorite of the many I have tried. I can't wait to try this version!

[@christopherleadholm6677]

I was SO CLOSE to ordering this one several weeks ago when I first saw it, but i decided to go with the Argon One Neo instead. Pretty impressed by the little guy, and am impressed with Argon One itself. They're an 'outside the box' company as far as design goes and i kinda like it! Good solid case

[@NIBricks]

Hey Jeff, great video I was actually looking at purchasing this case when stumbled to this video. You've helped me decide to go ahead and purchase the case

[@JeffGeerling]

Hopefully you like it! I've been using mine for my OctoPi for a few months now and it's been great!

[@TheGraeme61]

As i will be looking for SSD for Raspberry Pi4B project soon this video was very interesting .It gave me an insight to what i should look for .Thank you very much for sharing.

[@derekgoodwine7509]

I just came across with this video and your channel. Your work on Rpi4 is extremely interesting. I just subscribed to your channel. Expanding Rpi4 to a mini-scale computer with almost all functionalities is an amazing thing: I love this idea because with 90 dollars (a very affordable ticket) you can star your journey and go up in accordance with your budget, interest and eager to learn: you can stop when what you can afford is done without breaking the bank by building a huge desktop. Keep it up. Very interesting subject: NVMe SSD Boot. Please keep it up Sir.

[@ChristianBartelius]

Great video! I just want to compliment your recording setup, the dampening boards does wonders. :-) I went into the older raspberry pi fan case video for comparison!

[@otter25702]

Well done a nice clear articulate voice an easy to understand. I bought one of these and as of yet haven't used it. I'm waiting on a M2 drive to arrive. I'm hoping I can use it for retro gaming. I'll explore other uses for it latter on.

[@paultech9385]

Dude, that was a fantastic video! Super helpful, thanks.

[@ff1077]

I got 3 of the normal version of that case. It is such a good case for my pis. Definitely thinking of picking up the M.2 version. I also designed my own stackable mount for these cases that I could make on my 3D printer.

[@bastiat6865]

This report made me very excited about getting a Pi4 and a 1 TB M.2 SSD

[@WisherTheKing]

You make really good content. Keep it up.

[@sgguitarfan7]

Like always, good content 👌😌 Keep it up ❤

[@hrnekbezucha]

Dude, you're on fire! So many videos

[@e1woqf]

It's a great case. I've got mine about 3 weeks ago and what I like most are the full sized HDMI connectors.

[@brianbirkinbine2054]

Love this case, looks great sitting on a shelf and stays cool. Using a 2tb WD m.2 (WDS200T1R0B) booted from microsd ubuntu 20.04.

[@MrFurano]

Your setup is exactly what I want to build. Do you have a tutorial video on KZbin?

[@edmaling8399]

I have this case. Shipping took forever from Hong Kong. I would fully concur with your review. Excellent job.👍 I used the WD M.2 2280 1 terabyte drive. Works well for me.

[@annihilatorg]

My favorite case by far is the DeskPi Pro. Sure it's $60, but it comes with a sata ssd mount, better power and fan controls, ice tower cooler, better form factor, more accessible ports... Totally worth.

[@RomanBorowinski]

I got this case and it is really cool ! I got Original Argon case without SSD as xmas gift last year. What is interesting, they sell that part with SSD separately. So instead of throwing away my entire case I purchased expansion board and swap the bottom :!

[@Davegibson94]

Where did you find the bottom. I’m in the same boat and don’t want to have useless case. Never mind. Clicked Amazon link and selected options and there it was. Thanks!

[@W1ldTangent]

Only downside that prevented me from doing exactly that was that you don't get the IR receiver, and you're stuck with the original's micro-HDMI ports... I figured there's no point going halfway, and I can always use an extra case. So now I have a full original and a full M.2 version, oh well.

[@sfliberal]

Short version: the Argon One keeps the Pi 4 cool with aplomb. But the M.2 functionality is sketchy. Gave this case a try with a Pi 4 w/ 8GB DRAM. Added an M.2 SATA drive inside. Did the stressberry-run test with the overclock set at 2.0 GHz and video at 750 MHz. Ran the test for an hour. Temperature flattened out at between 61 and 63 deg. Celsius after about 2000 seconds (about half an hour) and stayed there. CPU clock stayed at 2.0 GHz the entire time. The case definitely felt warm to the touch, but never hot enough to burn my hand. This case keeps the Pi cool, even at a 33% overclock. Here are the graphs. pixhost.to/gallery/vH67G At 1.5 GHz, the temperature flattened out at 50 Celsius after 15 minutes and stayed right there for the remaining 45 minutes. No throttling, of course. HOWEVER.... The M.2 functionality of this case is, unfortunately, NOT reliable, and others out there have reported the same problem. I tested it with two Crucial MX500 SATA SSD's. The computer could see the device node, /dev/sda, in both cases, but partitioning and/or copying data from the MicroSD card failed with both MX500's. I verified both of these MX500's afterwards by running them in another system (they work great). Then I tried using an external 2.5" SSD (same capacity, 1 TB) through the USB 3 cable. That worked beautifully. So, I'd suggest getting the Argon One case without the M.2 add-on and save some money. This M.2 version is a great idea; I just wish it were more reliable.

[@NewAgeDIY]

Facts and only the facts makes a Maker’s Day! Thanks Jeff 🤓

[@jay31415]

On the "M key" vs "B & M key" thing.......wow. I had no idea "key" was a thing. I thought M.2 was M.2. This explains so much, like why certain M.2 adapters didn't work in the past.

[@RafaCoringaProducoes]

nice honest review

[@FoxedWorks]

Wish I could buy that small daughter board on its own, really like the idea of all ports on one side for my own designed cases

[@SteveFrenchofVoltVision]

Excellent video! Loved it.

[@IngwiePhoenix]

My personal selling point about the Argon case is the fact that it reroutes all the ports to the back. I am stumbed that no other cases do that - it's the biggest thing to think about when using the Pi as a media center; having a clean setup with all the wires going to the back.

[@zambonidriver42]

Dude. If you’re going to throw down the gauntlet at Argon, go the whole way. Multi CM4 chassis! With PCIe, multi gig/10gig. Everything.

[@jfan4reva]

They will be coming out with that as soon as they figure out how to wedge all that into a case the size of two decks of cards....

[@simoncunningham1195]

I would like to see stackable units, much like older component stereo systems. Each unit could connect to the one above/below through those little USB bridges. Just keep adding bricks! We have three of these cases in my house. They are very nice.

[@launacorp]

i think this case is a pretty good deal. 2x HDMI in Full Size + support for Sata SSD in m.2 and good temps for the Pi is something that I found really usefull. Thanks for this Video Jeff!

[@lukemurphy7917]

I find that even with small surfaces any flat surfaces are just a magnet for clutter, and while you can’t stack them it might hinder cooling when stacked

[@matterwiz1689]

Thanks. I'm building a rpi-powered Toughbook and the pcbs from this case are perfect to connect up all the things i need inside the chassis. Funnily enough, i wont even be using the case itself for that...

[@dirkverkaik5786]

I use this case for two months now, it is great. Great test Jeff !

[@jmsiener]

I'm all about this case. Got it at the start of the year and couldn't be happier with it. It's pricey but I think it's the jam. The fan is practically silent and most of the time doesn't even kick on because of the passive cooling. It also feels super solid in the hand and don't have to fool with micro HDMI.

[@TheOleHermit]

Couldn't agree more. The only issue I've had is incompatibility with a DAC audio HAT. But, Argon One also sells an audio version of the case with built-in DAC and RCA connectors. They also sell an M.2 upgrade bottom half separately for ~$25 ;-)

[@jmsiener]

@@TheOleHermit yeah, agreed that it doesn’t provide much in the way of hats. I suppose you get a 40 pin ribbon cable and do an extension but it wouldn’t look too pretty which is what I love about this case. I spent most of 2020 with a pi4 in a cheapo case+argon fan hat sitting on top of an SSD. The argon m2 is far more elegant. Plus the new drive+SATA controller is far faster than what I had before.

[@TheOleHermit]

@@jmsiener LOL! I also have 2 Argon fan hats, sitting on the shelf. But, ended up purchasing 3 Argon One cases (2 * M.2 + 1 w/DAC-RCA) for the same reasons as you've stated. If I need a HAT, I've become a big fan (pun intended) of this case: www.amazon.com/gp/product/B07D3S4KBK/ref=ppx_yo_dt_b_search_asin_title?ie=UTF8&psc=1 The top cover is exactly the same size as a HAT, is vented, and can be raised with standoffs. Plastic is also very easy to mod. Thanks for sharing ;-)

[@smccomas01]

Thanks! I will likely purchase.

[@Havron12345]

Thanks for the video -- you sorted out a difficult problem for me... The problem is Amazon is not clear at all -- I searched for B+M on a few specs -- nothing listed... This may fall on Argon for not using a more flexible chip set. I have a little M.2 enclosure and it seems to work on everything... I get that the PI and argon is more tilted towards makers but you should not have to be an expert to figure out what works where.... Keep up the good work -- it is people like you that help those on the learning journey

[@WisherTheKing]

Wow is that a VHS player?

[@e1woqf]

Yes, indeed it is!

[@DanielPinel]

Yes.

[@WisherTheKing]

@Eissari4 but specifically a VHS player. ;)

[@Bulletcore]

It needs a sports car case reminder 🤣

[@TrollingAround]

The rear USB connector is quite useful, remove it and you can connect a regular USB 3 lead and use it as USB drive on other computers (handy for writing images to the SSD from another PI or a PC without having to dismantle the Argon one case).

[@W1ldTangent]

Good luck finding a male-to-male USB3 type-A cable, those aren't common (they *do* exist, to be clear, but you won't find them at the dollar store).

[@TrollingAround]

@@W1ldTangent - type-A male to female cable and a male to male gender adaptor works like a treat ;-)

[@iamlinxx_]

Dude you literally just saved me a fortune I didn't know there was a difference between M2 SSDs I just checked my mobo on a pc I am building and it have a NVMe PCIe M2 I was just going to buy any old M2

[@thimiraamaratunga7794]

I believe that the USB adapter is made big to shield the USB interface from EM. I had issues in the past with cheap USB-to-USB adapters for Pi which weren't properly shielded.

[@pikaskew]

Argon makes some great cases. Been using a Neo for awhile and love it compared to the Flirc. (although the fan hat implementation could have been designed better for airflow with the lid on)

[@nakwadroid]

That housing looks like a Cybertruck! I'm digging it to be honest.

[@djmcwill1010]

Eh...well...when you put it that way... Does make it cool. 😏

[@Star-kp8oc]

lol sure does

[@roymorrison1075]

WD Green SATA SSD m.2 2280 120gb also work with this case. Great video.

[@divye.ruhela]

Since I can't seem to be able to comment on your blog, thanks for the detailed review. Can you tell me what are the power requirements with the Case fan+your SSD? Is the official RasPi4 15.3W USB-C Power Supply enough or do you recommend some other adapter to power the rig?

[@mbusbridge1]

I just got one up and running with a 2GB Pi4, running TwisterOS off an EMTEC X200 External Drive. I only picked up the top half, so no drive bay, SD card access and all the other perks minus the M.2 Bay. I was worried about the drive overheating , like you said, no cooling down there. So I opted for an Argon One V2 without the M.2 and the external SSD. If I cook it I won't bother with the drive bay. On my unit I managed to keep two small heatsinks mounted on the two small chips near the USB and Ethernet connectors. I understand one is for the Pi's USB controller. If you are worried about thermals on the Pi's controller maybe that would help. I don't a FLIR camera, so no idea if it's a help or not. Either way, I managed to get mine to fit without issue. I measured mine for clearance, so if you try it out as well, I'd suggest that you do as well. Not likely there all made with the same vertical footprint. So far the unit is stable overclocked to 2GHz/600MHz CPU/GPU, OV6. Running from the external SSD brings this little puppy to life! Thanks for showing me how to get everything up and running. It helped a lot!

[@Dobrufusnoretro]

I really like this raspberry pi case :)

[@steveseeger]

There was a *VCR* in that entertainment setup! Wow

[@AndreGovereau]

I have 3 of these cases absolutely love them, the only downside is I can’t get trim to work on Ubuntu Server 20.10

[@sovereignlivingsoul]

My Argon One arrived last Friday, it was an easy assembly compared to the DeskPi Pro. I am very happy with it, I am currently running Raspberry Pi OS, USB boot with no microSD card. It is annoying not being able to access the microSD slot, but If I am going to use a case like the Argon One, I shouldn't have to switch out the OS anyway, there are plenty of cases to use for OS switching. My Argon One is set to have the fan come on at 55deg, problem is, the temperature is usually between 45 and 50, so I can't say how loud it is at this time.

[@wyvernnot]

I'm using 240GB WD GREEN SATA SSD M.2 2280 from Western Digitial, it also works great

[@sidneysmith4622]

If it's nvme it isn't sata then. M.2 is the form factor.

[@cybervoid8442]

Should've watched an LTT video

[@ReptilianLaserbeam]

I got the 20 USD version which doesn't have the M.2 enclosure/adapter, and it has a really easy access in the bottom to remove the Micro SD. I'm tempted to buy the additional bottom to fit an M.2, as they sell it separately as well, specially because I'm using my PI as my daughters school computer.

[@martingerlach_1990]

@JeffGeerling, do you know automatically by looking at the SSD, if the SSD is an NVMe SSD with b+m-key or an SATA SSD with b+m-key? If the mainboard has a b-key slot/connection, is it theoretically possible to install and use an NVMe SSD with b+m-key? Or should I call it AHCI, because the b-key is for SATA SSD, the m-key is for NVMe SSD via PCIexpress and the b-m-key is also often used for SATA SSDs and NVMe with AHCI?

[@kk0dj]

Hey Jeff... could you please add the links to the videos you mentioned as reference to the show notes? Thank you for pointing out the subtle differences in SSD drives - I was about to pull the trigger on this case but need to know these issues before I do. Again, thanks for a great video!

[@OmegaTI]

I'm sticking with the original design as the M2 has WiFi issues, the M1 it's not as tall, so it fits where I need it and it has easy access to the SD card which is nice because I sometimes use different operating systems. When I use it for KODI, it works well with my TV's remote control.

[@AlexPhelps]

Nice VCR, didn't know people still used those. :P

[@BeOurBee]

I really want to love this case, but I wish they'd gone with a regular SATA port and 2.5"" drive compatibility. There are only a handful of non-garbage m.2 SATA SSDs, especially when you go up into the 1-2TB range. Regular SATA would have also allowed for spinning rust drives for higher capacities in roles where raw speed isn't an issue.

[@EvolverDX]

I use it for several months now. The pi runs some servers via docker containers and everything is fine so far.

[@CraigMullins1]

Your videos rock!

[@MrFurano]

Thanks for sharing the info, Jeff. It's very useful! I want to have as much storage as possible. Do you know if it works with Kingston "1.92TB" A400 SATA 3? I will go buy it via your link if it does. Thanks a lot again!

[@akumpum]

Perfect Video

[@simonlyons5681]

I recently got one of these, and a big selling point for me was the ability to easily perform a safe power-off. Supposedly the power button implements a safe shutdown but that has __not__ been my experience. The Argon simply cuts the power to the Pi after a few seconds. If you don't see the PI's LED flash 10 times, it wasn't a safe shutdown! HOWEVER all is not lost. If you shut down the Pi via software (from the desktop or command line) then after it has powered itself down, the Argon notices (presumably it monitors the current it is supplying) and cuts the power. So there is a safe shutdown but not by giving the power button a 3 second press as per the user guide. Then to switch it back on you just click the power button. Overall I'm happy with this although I think the thermal design could be better. If you're going to have a fan you should arrange for it to draw air through the case, but it just seems to act as a stirrer.

[@peanut71968]

This is a nice case.

[@goport]

I have the older Argon one with the expansion M.2 - It has the smaller HDMI's and no IR but its a decent enough case. I just wish someone would bring out a similar replacement bottom style expansion for the Pi 400.

[@russdibennetto8591]

I'm using the DeskPi case for my Rpi-4. I looked at the Argon but chose the DeskPi for two reasons. 1) it also takes a notebook SSD plus the M.2 drive, and it has an external SD card slot. Other than that they almost appear as clones as both have IR sensors and Fan + Power switch software. Have you tested the DeskPi? If not I would love to see you test it and compare it to the Argon. The only down side I have with my DeskPi and I believe it is also a down side of the Argon case, is the fact that it seems to attenuate WiFi and Bluetooth signals a bit.

[@argon40studios]

Awesome review Jeff! Thanks! :) #ShareTheLove #ArgonONEM2 #Argon40

[@MAD20248]

planning to use for HA installation. anything especially inhave to do to boot from the ssd , except fishing HA to the SSD. also, what do you think of using it for HA. I think it's the best option in my humble opinion.

[@alvar0hurtad0]

W!!!!!!! after years following your work and using your open source software I've just discovered you've a KZbin channel. you've a new sub.

[@PeterLawrey]

I added a 1 TB 2.5" SSD to my CM4 and it works well. Faster than the built in micro SD.

[@amnottabs]

I keep watching these videos even though the smallest computer I have is a 1st gen Skull Canyon which is a big slab compared to these Pis

[@deechvogt1589]

Hey there Jeff, unfortunately, I bought my Argon40 ArgonONE case too soon. My model has the micro-HDMI ports instead of the regular HDMI ports. FYI you can buy the M.2 section separately as well.

[@millbean13]

It’d be helpful to do an install video showing the process of setting it up. I’ve been looking for one and can’t find a good one.

[@bullshitvendor]

Sooo, if you need the 2nd USB3 port for semi-intensive bandwidth applications like say an astronomy camera that suddenly decides to dump some 4k images to storage, how will the ssd fangled pi4 cope? I would assume some temporary seizing and/or stuttering but maybe I would be pleasantly surprised.

[@01bigtrev]

I’ve just purchased the expansion board and then purchased 1tb crucial m.2 ssd not realising I need the sata ssd version. Doh, wish I’d seen this video before hand. Luckily it’s prime day tomorrow so hopefully get a discounted one

[@zyghom]

I have already 2 of these cases. Few comments from me: 1- power supply: this box due to internal connection for the incoming power, looses few milivolts on the way and this case is extremely sensitive to power supply 2- connecting secondary USB with SSD in it very often crashes read/write from it (probably due to voltage) 3- the fact that this case does not allow to stack 2 of them on top is done (probably) on purpose: the case gets very hot (passive cooling) so stacking 2 heating cases would kill the passive cooling idea 4- with M2 bottom no access to microSD - this is sometimes an issue when your SSD does not boot - screwdriver needed (but probably not too often) 5- in general: very "sexy" and well designed case - I would add permanent switch (not push button) for power 6- I put green WD disks in it (one is 1TB, second is 250GB) and the performance is stunning! 7- the fan and controlling it is SO COOL - my RPI in this case never ever goes above 55C with even the craziest i/o or CPU consuming tasks (previously, in the "normal" case without the fan idle mode was around 62C) - due to extensive passive cooling in One M2 case even fan is turning on very rarely

[@jfan4reva]

Yes, this is probably one of the most expensive raspberry pi cases, but if you start adding up everything that you would need to match what it offers, you quickly discover that the price is reasonable. I bought one of these just before the m.2 model came out. A several months later they came out with a kit that converts older models to use m.2 SSDs. Unfortunately, it doesn't convert the micro hdmi to standard hdmi, but it has everything else that the m.2 case has. And yeah, it's getting increasingly difficult to find a SATA 3 SSD card. Everyone wants NVME since they are several times faster than SATA 3.

[@phyyl]

SSD drive :P nice video!

[@josemarprete]

Hi. Sorry for the bad writing, but I'm Brazilian and I'm going to use the Google translator! Great video! Congratulations on your work! I use ArgonOne with a 512 GB SSD M2 SATA drive and the PINN application for multi-boots. I installed Batocera, Kodi, Ubuntu and RASPI OS. I decided to configure the Argon One fan, using the command described in the manual. I have to say that I am a layman on Linux, but I managed to make it work on RASPI OS and UBUNTU. I tried to configure in BATOCERA, using Putty, but I couldn't. The program starts to install but gives an error and does not complete the routine. So the solution I found was simply to change the jump and leave the switch always on, but for that I lost the functions of the on-off switch. If I just turn the power on and off, the fan turns on. However, if I touch the button, that function changes and the fan turns off. I can't touch the key. This at Batocera. Would you have a solution for using the fan on this system?

[@tchamp72]

I've had this case for a while now. It's totally worth $45! Love that it moves all the ports to the back, and also adds SSD support. And he kinda glossed over 2 FULL SIZE HDMI ports!. No, I don't work for them, just a huge fan.

[@MrMalchore]

I was disappointed with the full size hdmi. I bought CanaKit micro HDMI cables, and now have no use for them. I had to scrounge around looking for an unused hdmi cable I had laying around. Thankfully I found one.

[@TheOleHermit]

Same here. I have the standard Argon One, the M.2, and upgraded another Argon One w/audio jacks with an M.2 bottom for a 1TB SSD media player for the living room.

[@egggofff5057]

Something I noticed with mine. I had to use a bigger power supply. It would get underpowered lighting bolt sometimes.

[@iliyasmohammad5568]

There is one problem with full hdmi connections. For some reason, the output is 1080p instead of 4k.

[@healeydave]

Jeff, I have this case currently with a WD SSD but I want a Coral AI too. Should I put a Coral B+M board in the Argon and move the SSD to a USB B+M Adapter or would the Coral B+M work in the adapter if I left the SSD in the case?

[@00puchtuning00]

Its a nice case, put i had problems with the onwire bus not working.

[@mikemcdonald5147]

I wonder if you took a Dremel tool with a small cutting wheel and cut a slit where the sd card is so you could put in and take out the sd card without taking the case apart

[@ShubhamBhushanCC]

Angular Gaming Monstrosity 👌🏻

[@alfonsosmart]

Hi Jeff, how about a built of Pi4 with the NAS case Argon EON and MediaVault? Curious about performance against Sysnology.....

[@HamedAdefuwa]

Great video! No cards linked btw.

[@10minutetech74]

The DeskPi Pro is getting some competition now!

[@DindinKomarudin]

Hi jeff, thank you for your review. I have problem with setup fan for using with windows OS Please help. thanks alot before.

[@ongs1999]

Hi Jeff, Is the board that came with the Argon ONE M.2 Case is the same board as the "Argon One M.2 (upgrade)"? I just try to find out if the expansion boards are the same in both packages. Thanks.

[@JeffGeerling]

Yes, it's the same board.

[@kingdom13keeper]

Gotta say, if where those stand offs for the M.2 are below could maybe be replaced with heat sink fins, and then a fan built into the roof of the console. I feel it would make it more reliable and console like and would be down to give that kind of thing away as a gift. Like mini console.

[@lightningvini]

I can relate to the M.2 rant