Easy Casting | Silicone Rubber Mold And Statue Making | Make Your Own Silicone Mold and Statue | DIY

[@rimmisd]

ॐ गणेशाय नमः 💐🚩🔱🕉️🙏

[@IamAdrianaCarolina]

This was the best advice ever. Thank you for your video and your time

[@asitmukherjee5397]

Very beautiful.your teaching power also very good.thank you

[@avakaazmarketer1657]

🎉🎉🎉🎉 Many many Thanks.. Will be much helpful to me. This is what I'm in Search😊

[@DocReasonable]

Amazing result, well done sir.

[@peterbuckby7319]

Nice work 🇬🇧

[@Satishthemagician]

Wonderful detailed video. Thank you so much

[@ashoksarin2736]

Wonderful Bro ❤

[@sreeramchannel3015]

Super work. very interesting topic. I appreciate your teaching skills

[@mohamedwael5039]

Thank u man ur video is very educational and very good

[@bhadrankr5387]

Thank U for sharing this tech idea of making Silicone Rubber Mold.

[@Ruff-and-Tuff]

can i use same mould for resin liquid ?

[@gopiv608]

NiceeciN....

[@jodit73]

when using the mold do you need to spray some sort of release before pouring to make sure it releases?

[@mathkor89]

using a mold release will help prolong the life of your mold, although its a necessity when casting silicone on silicone so it doesn't bond to itself.

[@arronthomas68]

Awesome video! Straight to the point easy to follow

[@SELVAKUMAR-wd1ek]

Superb...nice clear cut tutorial 🎉

[@chitra4240]

చాలా చాలా బాగా ఉంది, మాకు ఫేస్ మొల్డ్ చూపిన్ galaru

[@queentvk3452]

Hai, super, easy to understand.

[@mahendrapandya1822]

Vah. .Bahot badhiya...Thanks.

[@sherryleebuchanan]

Excellent tutorial. Thank you.

[@rtat5803]

দাদা তোমার ভিডিও আমার খুব ভালো লাগে❤

[@Sassypiaa]

waoo nice bhai

[@ArnabLHT]

Thank you...😇

[@Mahesh46666]

Thank you so much for your valuable video

[@ArnabLHT]

Thanks for the support...

[@Mahesh46666]

Very good explanation Thank you so much for your reply,

[@aymansaad6246]

Greetings from Egypt 🇪🇬

[@vijayalakshmiramakrishna3441]

Thank you very nice

[@swaminathaniyer2647]

Wonderful

[@Vasudevkrishnamohan]

Very useful sir.

[@artistbhumesh]

Nice 👍

[@gigabuck9091]

you should have sprayed soapy water inside the silicon mold to avoid plaster bubbles

[@Roya986]

Nice work

[@shrirangkotbagi8326]

Very nice

[@victorfloresperu]

Interesting video. I much like it. I suggest to use a vibrator table (vibrator+ table as simple as sounds) to release all possible bubbles). I wonder what is the difference between synthetic glue and silicon because it could be an earning plus only buying the catalyzer. Another question is if we can use another compound like traditional escayola plaster? Probably it would reduce the cost of the statues.

[@Jezzer2014]

Thank you for this. Have you made larger items with this method? I am wondering whether the weight of the casting material might distort the silicone mould, unless it is supported by some rigid structure. How have you dealt with this issue?

[@ArnabLHT]

Need to make a strong holder for it. something like a wooden structure for big-size casting.

[@SundaravadhanamKumaraguru]

I will try my leval best. Very surprising

[@t.k.sureshkumar7102]

Wooow super

[@gameplay1269]

Excellent 😮👍👍

[@ArnabLHT]

Thank you 👍

[@dollysuryavnshi2245]

What about loup between hand and head

[@ArnabLHT]

Mold need to cut those types of areas

[@TheAadhyatm]

Very good, thanks for sharing, where we can purchase lsr2?

[@ArnabLHT]

Link in the description box...👍🏿

[@AKIBUKI_Surojit]

This is very nice 😊

[@ArnabLHT]

Thanks for the support... Stay tuned for more😍😇

[@rahulm9032]

Nice information

[@sushmajain381]

Beautiful

[@TitoDe-n7h]

Sir pls provide the name of rubber material, it's a very good usefull video, my child want to make it,

[@ArnabLHT]

@@TitoDe-n7h please check the link in the description box

[@colin1235421]

I wonder how 3D printing compares.

[@abhayganesh6364]

can i use it for making skin mask for my robot

[@ArnabLHT]

Sure

[@amrobidoux1]

Very helpful thank you for the video

[@vanumod]

Good videos, can you show how to make silicon mould for effel tower

[@raajsuman1292]

So nice, thanks bro,for sharing.

[@ganesanganesan-ub2sg]

Super ma ❣️😘❣️

[@Sahitya003]

Brilliant 👌🏻🗿

[@jancymanikandan1825]

Super sir

[@Zxcvb137]

Every good tutorial.👌🏼What is the ratio of POP & stone powder used, or you have just randomly mixed it? Is POP, not strong enough that stone powder need to be added increase the strength? Can we make this with POP or stone powder alone without mixing with each other?

[@ArnabLHT]

No Need to measure it, just make a thick paste with pop or stone powder. You can use them separately, but stone powder is stronger than POP.

[@Zxcvb137]

@@ArnabLHT thanks for responding. Much appreciated.

[@omshiva8125]

wow super

[@vidhyadhar64]

Nice and useful video. Best wishes..

[@sunithipagadala]

Can you please make for Big statue

[@valeratkanta9682]

You are too good❤❤❤❤

[@olympiasaint-auguste3119]

what if your object does not have a flat bottom to glue to plastic bottle?

[@OscarReyes-zs8eq]

Excelente 😮

[@mallikarjuna4215]

Super Anna 🎉

[@ginger---]

I want to make a mold of a 3d flower i made in clay, my question is, can i cut the bottom of a silicone mold and still be usable? The shape of the flower is so detailed.

[@ArnabLHT]

@@ginger---Yes you can use it but, need to secure it very tightly.

[@ginger---]

@@ArnabLHT thank u!

[@Dharani_sai]

Excellent

[@dakshashah4189]

Hii sir,stone powder nd white cement kitni matra me lene ka?

[@ArnabLHT]

You can only use stone powder, it will be more strong and hard.

[@queentvk3452]

Super, easy to und

[@denzong99]

Excellent👍👍 Where to find Rubber silicone n stone powder?

[@ArnabLHT]

link in the description box

[@nidhisinghchauhan1050]

U can use alginate ...then pop

[@tseringhyolmo1710]

Even i tried my best but i got bubbles every time

[@aktrash9738]

Mix pop properly

[@udayasoni5481]

U should tap tap well to release bubble's

[@newfish4552]

try using something that vibrates maybe that might help

[@lambamamba999]

What if we use hot wax ? Is it works

[@swagata79]

Sir do we need to add wax to the actual figure before moulding?

[@ArnabLHT]

No need

[@aylayigitarslan1121]

Türkiye Ankara teşekkürler ❤🎉

[@omisinha1585]

😮😮😮❤ beautiful…

[@sanjeev6100]

Say the which chemical you have used

[@sanjeev6100]

And catalyst name

[@parthasahapartha3229]

❤ excellent

[@arpitaroy5302]

Do we need to apply any oil or spray to object before pouring the liquid? Or directly we can pure the silcone

[@ArnabLHT]

You can apply little bit of any oil... apply with brush.

[@LexiSmith-fv8xn]

I can't understand the name of 2 powder you add onto the water. May I know what are those? Thankyou

[@ArnabLHT]

one is plaster of Paris the other is gypsum powder used for dental casting. link in the description box.

[@d.essenceofdestinee]

rubber bands.... I'll try that because hot glue does not work... nor does tape lol

[@KellyNeddo]

Thank you

[@DeepikaSricharan]

Can I get the silicon rubber and catalyst to buy online? Can you provide me the links plz

[@ArnabLHT]

@@DeepikaSricharan link in the description box.

[@VINODSONIFAMILY]

You should do it vaccum , then need to even touching

[@dannypinto3165]

Thanku

[@vinodjaylal4493]

Want to see soft mould making

[@abhaygupta8380]

Can it be used for epoxy resin?

[@ArnabLHT]

Sure

[@sarmistasharma5590]

জয় শ্রী গনেশ 🙏🙏🙏🙏

[@swapnilarts6632]

Can we use the mould again and again ?

[@ArnabLHT]

Yes, several times...

[@smellymala3103]

Every time he puts my little bro down facing away 🫣 haha j/k and thank you for the tutorial bro!!!

[@maheshkumaruppu4413]

Also use hot candle liquid

[@hardeepsinghluthra8875]

Can we use white cement in place of POP?

[@ArnabLHT]

Sure...

[@rajibbasu48]

Rubber mold kaha milega ? Price ??

[@dhruvp246]

can i use metal in this mold? if not how?

[@ArnabLHT]

No...

[@jorgenava1726]

Interesante,sin embargo un molde efectuado con hule convencional y vulcanizado posterior,tene algunas propiedades que son interesantes. Primero un molfe convencional hecho x vulcanizado,es mas barato y tiene algunas propiedades wue lo hacen superior. Despues de vucanizar una pieza cualquiera,sl molde en cuestion se ahoga en petroleo durante 24 horas,el hule se incha y aumenta el grabado unas 500 veces,posteriormente con parafina se obtiene una copia pero mucho mas grande,a este proceso le llamé "jonapru",espero les sirva

[@ArnabLHT]

Fantastic....👍🏿

[@CHATTISGARHSTRUGGLER-qt9up]

Use latex rubber low cost fast molding maker

[@dancing_pencil]

What is that? Can u please explain

[@DanDragneel]

J’ai une statue en longueur, savez-vous comment bien consolider le tour pour ne pas que ça coule ? J’avais fait avec des serres-joints mais ça a coulé sur mon bureau.. 😅

[@ArnabLHT]

Vous pouvez utiliser de la colle chaude pour cela.

[@DanDragneel]

@@ArnabLHT d’accord merci pour votre réponse ! :)

[@MdTohin-di6ri]

Where are these molts, and where are these chemicals? Do you have any?

[@ArnabLHT]

Link in the description box

[@Abcdiiiiii]

Cost of this silicon medium please reply fast

[@ArnabLHT]

Please check the description box

[@Abcdiiiiii]

I want to purchase offline

[@Abcdiiiiii]

​@@ArnabLHTalso i want to cast silicon models what to do

[@Update618]

Sirji kitne samay leta hai sukhne me?

[@amit91jain]

Write the name of ingredients

[@luzmarinazapataquintero5688]

esta muy lindo y fácil pero en ingles quedamos en el aire y además que diga las medidas y los ingredientes insisto en ingles nooo solo español por favor...gracias

[@rams5474]

Where to get the materials from?

[@ArnabLHT]

Link in the description box 👍🏿

[@user-re2wg9hp8y]

Wow

[@imammahady2137]

ingredients?

[@ved-5522]

Ratio of silcone rubber and hardner, plz clear it sir

[@bhagyamysore1952]

700 gm silicon rubber LSR-2 35 gm catalyst LSR-2

[@errolferreira3491]

Hi Thanks for sharing your video i need to ask you some more question how can i call or email you Errol

[@alloyseous]

What material is that where we can buy it

[@ArnabLHT]

Check the link in the description box...