I have a ginger jar that I’d like to recreate. Can you do an advanced tutorial on casting hollow objects? Thank you!
@davefulbright9734 Жыл бұрын
I would like to see additional mold making advanced videos, you are a very good instructor
@rashmiravindran533 жыл бұрын
Yes please make more silicone mould making videos!! ❤️❤️
@andreastewart421511 ай бұрын
Very helpful. I’m working on a project and being new I needed help on how to do this
@lesliewong27002 жыл бұрын
So you didn’t have to glue down the item? I’ve seen others use a sticky bottom in place of the plastic & Ive also seen ppl using double sided tape & also a hot glue guy to secure there’s no seepage under the item. Thanks!
@alexandrakrause28803 жыл бұрын
Great Video 👌 Would love more to see other mould making videos, such as how you made the mould for your fruit bowl or other difficult objects 🤩
@chrishebert32405 ай бұрын
Great video! I want to make mold for my vacuum chamber that I have. I have the idea how I want to make it but not sure what products I need to make it and where I can get that at. Anything you suggest is greatly appreciated!
@dillonhayes34024 ай бұрын
Say i want to make a silicone mold for a bucket because i do epoxy grout and apartments suck and theres nowhere to wash buckets and im sick of wasting money on them... Any tips on how youd go about making an inner sleeve so i can just let it dry and flip it out a few days later?
@SunshineDr20145 ай бұрын
Hello, I selected the link for the silicone, but the product isn’t available. Can you recommend another silicone brand that I can use? I’m completely new to this process. Great video!
@sunitasuri77113 жыл бұрын
Thankyou for the very helpful tutorial. Great tips. 👏🏼👏🏼
@CutieMoli4 ай бұрын
this reminded me i need to flip text on my mold!!!!!
@anelisaft2 ай бұрын
How do you clean the pot you used to mix the silicone in?
@fivepast125 ай бұрын
Hi! I know this video is older but hopefully you’ll see this - I have a clay paw print negative (so the paw was pushed into the clay if that makes sense ) but want to make a 3D version so I can stamp it/use it to make a tattoo from. Could I use silicone like this to fill the paw print I have, and then be able to use that to make a print do you think?
@anthonyelliott80923 ай бұрын
could i use a piece of cut plywood to make my mould? im planning to make shaped concrete stepping stones.
@susansanchez29887 ай бұрын
I am looking to make a mold for about a 6 foot piece of wood. I do some wood type crafts but one that I do I really want try in resin. Is there a special process for casting something made of wood?
3 жыл бұрын
Hi. I loved your art 👏 Please, enable subtitles. Thanks 🌹
@Dr.evil.porkchop Жыл бұрын
Using concept for parts. Thanks.
@lynnlaverack73342 жыл бұрын
I love that. I would love more on moulding.
@heman50777 ай бұрын
Question mam! Lets say I was to cast a concrete weight plate, would I be able to sand it down a bit, and then coat it using the same method?
@IanIan-cj7dj3 ай бұрын
How do i make molds of half circles of different sizes. Any adbice please
@sparkthego2 ай бұрын
Hi you sound 🇦🇺, I’ve had a 3d printer for a while but want to start making stuff for selling and personal.
@ToniChildsshiningstar4 ай бұрын
I would like to make a mold of oyster mushrooms to create silicon mushroom to where are a neck and cuff - can you please help
@Livslaystheday Жыл бұрын
When making silicone mould, do you put the coasters right side facing up or facing down
@murphchris56708 ай бұрын
Hi im making a skull mask like in the 4th Harry potter movie and I'm wondering can I use Mont marte plaster bandage to support my silicone rubber mold or will it stick?
@c.i.b.i.a Жыл бұрын
Hello! I've been crafting silicone molds for my customers and noticed varying behaviors in the same brand of siliconeI use platinum based silicon. While previous curing times difered-ranging from 24 hours to as little as 3 hours-they never affected the resin outcome until now. Recently, when the silicone cured within 3 hours and I poured resin into it, the silicon lost its shine upon removal of resin from the mold. This unexpected issue has me deeply concerned. Any guidance you could provide would be greatly appreciated. Thank you.
@gabrieleluperto53972 жыл бұрын
It’s suitable to put food? And the food process insidie oven it’s edible?
@michaelsass74702 жыл бұрын
I love the casting resin that you have used and could you please share the brand and where we can and buy it please Sheri? Can you colour it as well as an after thought please.
@89tothbianka7 ай бұрын
How long did it take for your resin to set??
@maudale Жыл бұрын
Thank you for sharing! If I want to cast a piece of mdf wood, should I varnish it to prevent the silicon from sticking?
@theartofthepour3882 жыл бұрын
did you make a more complex mold video? I want to make my own molds
@michellecameron58502 ай бұрын
Thank you so much … you give a great tutorial!
@jonr712 жыл бұрын
Hi there. what kind of silicon do I use. I want to make mould of a wooden football crest into concrete.. please help
@sandrabroussard25833 жыл бұрын
great video, thanks for making this one. does adding color to the mould have any affect on the resin when poured into the mould?
@lesbsocal910710 ай бұрын
I want to make a mold for something with a hole in it. How?
@aroojchaudhary2357 Жыл бұрын
Can anyone tell me the names of products which are used in making silicone mold?
@stanleyonyema13077 ай бұрын
How do I purchase silicon, I'm a Nigerian. Thanks
@LynnStevens-ry7pc Жыл бұрын
When making orgonite pyramids, do you only use resin inside to make it clear? Sorry random question I know. I will subscribe and start watching your videos.
@ved-5522 Жыл бұрын
Which chemical used to make silicone mold , in which ratio
@DragonRose812 жыл бұрын
I am wanting to make my own molds and will be using clear silicone, do i need to use special silicone pigment to colour it or can mica powder be used
@apriltime20086 ай бұрын
Thank You! I really enjoy this video. ❤
@andreaplattner79307 ай бұрын
what are some silicone brands?
@starrspoter3 жыл бұрын
just wondering i have some crochet earings i made i want to harden for people to wear. can u use reson on wool or cotton?
@starrspoter3 жыл бұрын
instead of making a resin coppy can u use the origional to make a coppy?can u make a vid of how u can turn every day items into molds,like a leaf shape small plate ect
@sherivegasartist3 жыл бұрын
Yes you can definitely do that. Any item can be moulded. I just didn’t have a the original item that I wanted to mould so I had to make one.
@starrspoter3 жыл бұрын
@@sherivegasartist i thought the mold u did resin in was the mold u wantred to mold can u do crochet and add resin
@staffie852 ай бұрын
Would have been nice if you said what shore silicone to use for what ie 10A, 20A or 30A… because I’d think that’s more relevant and helpful to beginners, than watching you hot glue cardboard together and mix an unknown shore rated silicone mix 😅 Guess I’m back to searching and looking to see if others have videos explaining that 😅
@DaisyPhantomАй бұрын
she said the brand was that not enough?
@phyllisgast83573 жыл бұрын
Thank you! I must try this one day when things settle down lol 😆 👏👏👏💕
@annedarmody91323 жыл бұрын
Congrats on 100k subscribers. A more advanced tutorial would be great. Thanks.
@andreaplattner79307 ай бұрын
what was the bottom made of?
@miafreyer10813 жыл бұрын
Would love to see a tutorial for a 3D Object like a ball or something that you then put flowers or inclusions in or like a large square flower mold or something
@sherivegasartist3 жыл бұрын
I will definitely start working a something along those lines soon
@fauziatariq29043 жыл бұрын
Awesome 👏 need more mould video tutorial plz
@jenniferhughes74742 жыл бұрын
Can the product you want to mold be wood?
@lynnlaverack73342 жыл бұрын
I would like to make a large bowl.
@pocapeca248 ай бұрын
How do I do a giant gummy bear mold?
@Memaxnwally2 жыл бұрын
Hi could you do the 3D mold? or more advanced
@Topofthemorning1000 Жыл бұрын
What if you’re making a mold of a doll ?
@janrobertson8952 жыл бұрын
Would love to see more
@coldblooded3449 Жыл бұрын
She has some amazing eyes!
@criscavi194 ай бұрын
Thanks.
@MarcoJetti7 ай бұрын
They are completely different!
@anti-victimGenX3 ай бұрын
Are you kidding? Sure, they're mirror image, but that's the only difference.
@wayne.cox09 Жыл бұрын
ThaS great thanks
@DanVonBank Жыл бұрын
please fix the sound volume
@DrakeElliott Жыл бұрын
Luanne Platter really did well with her life!
@KandyKoatedKrafts10 ай бұрын
😮
@jake41727 ай бұрын
I’ll tell you what….that’s hilarious.
@lalo99173 жыл бұрын
Please do a more advance tutorial pleassssseeee there’s not much info/videos out there
@phaganators4 ай бұрын
Liked and subd immediately😎👍
@quantamentanglementofdivin76 Жыл бұрын
Yes I'm interested in mold casting Sex Toys.
3 жыл бұрын
Hi. I loved your art 👏 Please, enable subtitles. Thanks 🌹
@sherivegasartist3 жыл бұрын
I would like to but it’s not that easy.
3 жыл бұрын
@@sherivegasartist Oi Sheri, vou responder no meu idioma... Desculpe. É fácil, você vai nas configurações no seu canal, tem o menu à esquerda. Lá estará a opção de habilitar legendas. Elas serão geradas a partir da sua voz. Desculpe pela solicitação, moro no Brasil e sou estudante de inglês. Mas amo sua arte! Obrigada