Arrma kraton v3 how to rebuild the rear differential

[@JoshuaRodriguez-ju7yy]

Nice video like how you go into detail explaining everything thanks!!

[@alexperea20]

Thanks very much I do my best to be detailed as I possibly can please let me know if you have any questions

[@ARstyle2189]

Those are metallic flake from the gears breaking in. Completely normal. Always a good thing to take this stuff apart after a few runs and do just what your doing

[@piercetiralongo]

Your videos are so helpful man! Thanks so much. I am new to the hobby and am still learning and your videos help me understand everything so much better . 😎🤙🏼🤙🏼

[@joshc8055]

Thanks for your help man, just rebuilt my typhon center diff thanks to you. 👍

[@alexperea20]

Thanks so very much for your kind comment I appreciate it very much i really try my best to be as detailed as possible thanks for watching

[@nickhooper770]

Thanks a great vid has just really helped me rebuild my rear diff 👍👍

[@speedfreak1161]

Well done , for those who haven't seen a Arrma diff before sweet job 💪

[@trhyrujdhtyrsehr]

What grease do you use for the main diff gear?

[@RichHair]

How you Clean the diffs from the Old oil

[@fishycomics]

Job well done to get a change out and however you want to go with. shimming greasing lubing etc. it gets the job done very clear easy to follow and well presentated what we all are after that You got my LIKE

[@alexperea20]

fishycomics thank you for the kind, I seriously appreciate it from the bottom of my heart thank you and have a wonderful day

[@arnulfschnitzler4695]

Hello Alex, you make best help video of all! Thanks a lot from Germany!

[@alexperea20]

Thanks very much i really appreciate it

[@zachcooper2759]

Very helpful video!

[@xfilecity]

Keep up the good work.... I'm new to this hobby and your video was very informative. I'm looking forward to doing this to my Kraton.

[@buddytee9]

Great video. Really appreciate the time you put in for this instructional. It helped me out big time.

[@stevevinas]

Does the front diff have the outer shim and gasket as well? I didn't see those on mine

[@marc-andrelemieux9769]

Is it me or at 14:57, you are putting those "Metal Cross Shaft Insert" on the wrong side? On the exploded view from Arrma's website, the flat part sits on the planetary gears.

[@99ville]

What size is that outer shim?

[@xampleman]

Damn man wish ya could show us how to take it apart. Nice video thought it was just what I needed but then u skipped all the part I needed

[@ELValenin]

Remove the four screws and pull the gears and pins out with pliers, the o rings with a screwdriver 😉

[@timothykees6187]

Awesome👍🏽👍🏽 I appreciate to educational class. Keep it up. Thank You.🙏🏽

[@alexperea20]

Thank you so much for spending the time out of your day to watch my video I really appreciate it and I'm really glad the video helped you out if you have any questions please let me know have a great day

[@taylorbrain5607]

The flat spot is fine, the points that need to be strong are. It’s incredibly simple engineering.

[@mrb2917]

You can't just use any black rubber o-ring, you must use silicon o-rings, the red ones in this video

[@mrb2917]

Also the silicon o-rings Arrma gives you aren't junk, they aren't too big. They swell with diff fluid after being in there for a while. If you can't get them back in there for your rebuild then you just use new ones from Arrma, they're cheap.

[@Dartheomus]

For the o-rings, it would be easier if you seat the ring and then use a hollow tube (or a socket) to hold the ring in place while you press the out-drive through.

[@JeffreyReiber]

I need to replace both bearings, how did you remove those?

[@rcsendandblast1579]

Thanks for the vid bro. I'll have to do my diffs one day to. Need to see first 👊😎 Good job 👍

[@realworld4740]

How do you take off that round thing under the ring gear?

[@lexsteel12]

What type of automotive solvent are you using for cleaning the gears? Is it auto degreaser?

[@alexperea20]

It's Master Pro Parts cleaning solvent I got it at O'Reilly's I got a parts washer for an like a real vehicle to clean parts so I got A5 gallon thing of it two of them but you may be able to get smaller portions or if you don't want to do that you can also use a brake cleaner and a toothbrush if you don't want to get automobile parts solvent which I think the solvent really really really works very very well but if you don't want to get the solvent I'd recommend 3M brake cleaner that stuff works awesome if you're in a pinch

[@liulangmy]

whats the red grease called？ can use something like bearing greasing ？

[@ELValenin]

I use bearing grease in my diff housings too

[@gussingleton4136]

Thanks again bro.🤩

[@mxgalek]

Iuse only silicon oring rubber oring gonna worn out when diff get hot

[@deletedions394]

Dog bones in "18?

[@abdulrahmanalzuabi171]

Hi alex , i soldered my battery connector in reverse polarity , when i connected my lipo batt to rc car there was sparking will this effect my rc car or batt?

[@abdulrahmanalzuabi171]

I have outcast 6s im trying now with one 2s battery since my other battery is damaged its not getting powered, does it need more batteries or i burned something?

[@dannyboyrecks8545]

Bro I have the arrma outcast,and I'm ready to do my first diff service on it but not so sure on what wheight oil to use any suggestions? I trust in your knowledge im doing all 3 and I only run 6s,thanks Alex yur help will be much needed

[@alexperea20]

Hello thank you for taking time to watch the video I really appreciate it all I run in my arrma kraton V3 is 6s lipo power only my personal recommendation is 42.5 weight shock oil from Team Associated and then running 100K front and rear differential fluid and then using a 500K in the center differential make sure to clean the differentials in like brake cleaner get a few cans of brake cleaner or automobile parts solvent cleaner that's what I personally prefer as always thank you so much for watching the videos it is greatly appreciated

[@dannyboyrecks8545]

@@alexperea20 thanks bro! Good stuff have a blessed day

[@alexperea20]

@@dannyboyrecks8545 thank you so much I appreciate you too please please let me know if you have any questions at all about your vehicle I'll be more than happy to help you with anything

[@ELValenin]

@@dannyboyrecks8545 I run 50k front, 150k mid, 20k rear

[@kcm731k]

Good job kid👍 ..subscribed

[@timothykees6187]

Thanks again. I sure will.👍🏽

[@chelseazi183]

VERY INFORMATIVE

[@hilbilydru]

Don't worry about the cups breaking. I have put my Kraton through 200+ batteries without busting one.

[@huckaberryfpv4986]

Has to sub,shim n my outcast,happy new year:)

[@proudcanadiansteinke9619]

U should be shimming your diffs with mugen shims

[@RCbashingtheKRATON]

RC RIDER you tell em bro..lol.. this is way not to do a diff...

[@HouseholdDog]

Whats the difference? Shims are just metal washers aren't they?

[@garypeirsol9610]

love your vidieos. your good. my delemema is not related to this vidieo but I would greatly appreciate your advice. I have traxxas stuff id charers and traxxas batts. want to install hobby wing esc cant figure out a goog way to switch esc and continue to use my batterys and chargers. particularly on my 8 s x maxx. would love your advice, unless you say change all batterys and chargers thanks alex. A again like you how to vids.

[@alexperea20]

Thank you so very much for taking the time out of your day to watch my videos I want to get that right off my chest also Traxxas batteries aren't bad they're not the best Traxxas Chargers I had one they're not the best either that's my honest opinion I'm not saying you can't use them or they're not working for you that's totally fine what I would recommend know if you're going to put an aftermarket ESC in your X Maxx 8s for example like the hobby when you were speaking of I would strongly recommend changing connectors to bare minimum xt90 S I would personally prefer Castle Creations 6.5 mm connectors because that ESC is drawing a lot more amps and Traxxas connectors are only rated for maybe 50 amps Max so the Trap the Traxxas connectors aren't the best for a high-power speed control the Castle Creations connectors R rated at 200 amps continuous it's a lot more safer for your speed control your electronics your motor especially your batteries if you're speaking trolls drawing too much amps and your battery connector is not strong enough to transport those amps to the speed control you're going to toast your batteries that is my recommendation you'll probably have to get a different charger to use Castle connectors but that is my honest recommendation for you for safety and reliability and everything else

[@garypeirsol9610]

@@alexperea20 thank you for your advice. I appreciate it.

[@phunguyen6039]

No one stupid who able to build that good toys , they built for ppl will spend more money or trash it n buy better one, more money ??????? Build one good for yourself n the world Stop calling ppl stupid because your arrow come back to you Be respectful .peace out Every one has brain too

[@erichiles9568]

People know what tools to use

[@stefandwoodham]

I bet this guy has never had a girlfriend

[@pinkfloydscorpio]

455 stage-1 because he does maintenance to a high dollar RC car? Let people enjoy things.

[@Pills161]

455 stage-1 Says the person watching an RC how to on taking apart a rear diff lol, how old are you 12? People who make comments like yours usually are the ones with no girlfriends.