Arrma kraton v5 6s ESC (spektrum) fan Upgrade.( also arrma v4,v3 6s)and two crazy fans for motor.

Hey guys..
Awesome fans upgrade for summer.
ESC arrma 6s v5 (spektrum,kraton,typhon and notorious and arrma v4 and v3 6s.
The heat sink-custom made.
***Notice the plus-minus connection fans **
The stock ESC fan size is 35*35mm.
The motor fans size 30*30mm
The fans is "surpass hobby"-Rocket.
The split cable for two fans motor from banggood.
Fans details:
35*35 (ESC)- input voltage 5-8.5v-----max-21,000 RPM
30*30- input v -5-8v, 0.6 current, max-28,000rpm.
If you have any questions I would be happy to help.

[@iQcreativeQu]

complicated technical design..deserves to be able to fly..this is one of the videos that I like..yes..the technical details of a device are discussed..maybe this is one of the shows that I will show later..ok friends I'm looking forward to it.

[@g.b-MTB-trail-jumps3062]

thanks alot mate

[@Marek_Z_RC]

These fans are very good 👍 When I put that fan on the table and connected it to the car, it started flying around, like a hovercraft 🤣

[@g.b-MTB-trail-jumps3062]

😄👌

[@RCRoads]

Thanks for sharing. I have a Spectrum ESC fan that is getting noisy and probably has all kinds of dirt inside. I removed the 4 screws and started tugging on the fan to remove it and though I might damage something so I passed on the fix. After watching this incredible video I can see there is nothing to worry about. 👍👍

[@g.b-MTB-trail-jumps3062]

Great mate

[@mypassionrc-studioxd40lous66]

Very good and knowledgeable work thanks for sharing, i need to upgrade fans on my team corrally 🙏✝️☮️

[@g.b-MTB-trail-jumps3062]

Thanks mate

[@thex_tazfast_x9842]

Awesome video. I normally dont like videos without audio but your video footage makes everything clear plus the music was soothing😁 Good job 🏁👊🏁

[@g.b-MTB-trail-jumps3062]

Thanks alot mate... I dont speek good english. Hop its help you. Its step by step. Dont forget for the esc fan its, 35*35mm I write below the vid Thanks champ👑

[@ScutuRC]

I love the custom made fan mesh protectors!!! True skills :D Good job there!

[@g.b-MTB-trail-jumps3062]

Thanks alot champ

[@marksmithdiecast001]

Another great video!

[@g.b-MTB-trail-jumps3062]

Thanks dude

[@kurikokaleidoscope]

Very interesting.

[@isaackshirley4695]

Love those rocket fans I use them to very powerful and very inexpensive

[@g.b-MTB-trail-jumps3062]

Great fans mate...my esc its 7.4v...so its most powerful😇 Enjoy champ

[@AnthonyBencomo]

Thanks for the video, I was wondering if the 35mm rocket fan would fit with stock shroud. This answered that!

[@g.b-MTB-trail-jumps3062]

Thanks alot mate

[@BIGALSCRAWLERS]

I was looking at the same fans for my exb, they look and sound epic 👍👍👍

[@g.b-MTB-trail-jumps3062]

Great fans💪

[@DanJr007_Collectibles]

Very cool video, my friend 😮😮😮😮😮 Thanks for sharing 🎉🎉🎉

[@g.b-MTB-trail-jumps3062]

Thanks mate

[@voldano-01]

Awesome video..👍👍 Thanks for sharing..👍👍

[@g.b-MTB-trail-jumps3062]

Thanks dude

[@josephocarez2925]

I need to see the negative and positive of the wire cuz my fan was burn

[@g.b-MTB-trail-jumps3062]

Yes mate

[@G9RCCar]

Video tentang pemasangan komponen ini sangat informatif. Terima kasih kawan.

[@g.b-MTB-trail-jumps3062]

thanks

[@t..s..8331]

keep bringing top videos like this, great like success always

[@g.b-MTB-trail-jumps3062]

Thanks mat

[@tresparatodorc7400]

This Rocket fans are really great

[@g.b-MTB-trail-jumps3062]

Great fans💪 Thanks champ

[@Massimiliano130872]

great helpful video! I have the problem that the fan breaks when jumping. what kind of fan is that for the esc? Also from banggood?

[@g.b-MTB-trail-jumps3062]

Thanks mate.🤘 Im write below the vid.. Its "surpass hobby rocket fan" Its on aliexpre...and bangood. Remember..the fan for the esc its 35*35

[@Massimiliano130872]

@@g.b-MTB-trail-jumps3062 oh, sorry, thanks. did you make higher jumps with your rc car? and did the fan survive?

[@g.b-MTB-trail-jumps3062]

@@Massimiliano130872 yes bro...you need also good "head stik". You can see the jumps on my chanl.. "playgroand... And "losi dbxl.... And mor

[@Tatersaladguy]

I have a question, I have the same fan, and I can't figure out which connectors the 2 pin goes into the 3 pin.. i think i shorted an esc putting it on wrong.. any chance you could explain it to me?

[@g.b-MTB-trail-jumps3062]

you have 3 pins in the esc and you have 2 ' holes" in fan. look at the + - of the conectirs and conect.(the fun conector conect or left or right in the esc-becoas you have 3 pins in esc...so or 2 left or 2 right..looke at the + -

[@beanuno4581]

Is there a reason you didn’t use the esc to power the fans and used the receiver instead?

[@g.b-MTB-trail-jumps3062]

Yes bro. The 2 motor fans conect to the reciver. And the esc fan...conect to the esc power

[@masonkielbiowski5876]

Hello! Thanks for the content, Is the rocket fan plug and play? Does it go into the same slot the stock fan did on the esc? Thanks

[@g.b-MTB-trail-jumps3062]

Thanks champ.. Yes...plug and work. See + -.... Enjoy champ

[@donniehallaman7685]

Ok so in the description it says stock fans are 35mmx35mm, the replacement one you used was 30mm×30mm clearly a way better constructed fan. The mounting screws matched the fan cover with no issue is my question? I am struggling with these esc fans. Thank you

[@g.b-MTB-trail-jumps3062]

Thanks champ I use for the motor 30*30 For the esc its 35*35

[@raindub1910]

Where do you get a 35x35 fan? I cant find ine anywhere..

[@Kkdd]

luxury rc car upgrade

[@g.b-MTB-trail-jumps3062]

Thank you🎉

[@Raven_of_Doom]

should work for Infraction 6S, V2 as well, correct? thanks for vid!

[@g.b-MTB-trail-jumps3062]

thanks champ....yes check the out put volt of the esc

[@Raven_of_Doom]

@@g.b-MTB-trail-jumps3062 default 7.4 , thank you (newbie here)

[@g.b-MTB-trail-jumps3062]

@@Raven_of_Doom great

[@boccatxrx5023]

Nice, they look powerful👍🏽 Stock fans last me about a pack before they are destroyed😄 I have a vid coming up you might like installing some super grunty fans if Ali Express actually send me the parts🤣

[@g.b-MTB-trail-jumps3062]

💪👌

[@SergiuM42]

I bought this fan but when I plugged it into my ESC it didnt work.. am I missing something here?

[@g.b-MTB-trail-jumps3062]

Hey champ. Make sure that thae fan work. And be sure of plus and minus conector + -.

[@MRBRUSHLESS]

Awesome video my man nice upgrades great job thumbs up 👍

[@g.b-MTB-trail-jumps3062]

Thanks champ👑 Great fans,do the job perfectly👌👌 And strong even if you jump high

[@kaycee9337]

Bro that music man .. 😭

[@juvaknin]

I need help :) the motor fans, where you connect to power them? you connect them to any free output (+ and -) from free channel at your reciver? thanks!

[@g.b-MTB-trail-jumps3062]

Thanks champ Im at work now... Two ours...with you. Thanks

[@g.b-MTB-trail-jumps3062]

You conect to the reciver. Be shure about the volt output from your esc. With car rc you have. Kraton 6s v5?

[@juvaknin]

@@g.b-MTB-trail-jumps3062 yes kraton 6s v5. Anyway my fans are 5 up to 8 volt. It will be ok i belive.

[@g.b-MTB-trail-jumps3062]

@@juvaknin yes bro...the esc output its 7.4v. Yo can conect the fans to the ecs. The third entrance from below. (by the book page 10) The entrance of esc its:from below to up. 1-steering- ch1 2-throttle-ch2 3- AUX... (fan) 4-batt socket You can put on 3 entrance...be shure + - Hope i help you champ...enjoy

[@juvaknin]

@@g.b-MTB-trail-jumps3062 cool. Thanks

[@tanksandairsupport4575]

Wow cool. Rc car😁👍👌

[@bygun5329]

nice install vid bro,i use rocket fans too they’re so fast!🌪💯

[@g.b-MTB-trail-jumps3062]

Thanks bro

[@ovidiuschley3346]

Wow , they have a lot of technology inside , that's way are go so fast and are so controllable . Thank you so much for sharing my friend and take care !🏅🏆👍

[@g.b-MTB-trail-jumps3062]

Thanks bro

[@c-historia]

wonderful! 👌

[@g.b-MTB-trail-jumps3062]

thanks champ

[@c-historia]

@@g.b-MTB-trail-jumps3062 have a great day, my friend!

[@bicycleandrccars568]

hi size is that fan?

[@g.b-MTB-trail-jumps3062]

Thanks champ.. Its 30 mm and 35 mm

[@XtaBeken]

good

[@g.b-MTB-trail-jumps3062]

Thanks

[@EnjoyLifeLikeaKid]

Thanks for sharing this.

[@g.b-MTB-trail-jumps3062]

Thanks dude

[@cars_and_drrams]

Very nice job 👏👍👌

[@apexstudio4657]

Nice work bro !

[@g.b-MTB-trail-jumps3062]

Thanks dude

[@paulus842000]

Really good video ❤️

[@g.b-MTB-trail-jumps3062]

Thanks bro

[@ultrarcgasolina9890]

Nice video i subs I love ❤️ i have 1/5 MCD 34 cc show

[@g.b-MTB-trail-jumps3062]

Thanks alot champ

[@divifo]

Very nice video and good work 👏👏😊

[@g.b-MTB-trail-jumps3062]

Thanks bro

[@weed4myneed]

where do i get the fan from that will fit my 150a spektrum esc?

[@g.b-MTB-trail-jumps3062]

Thanks for coment mate.. I have also spectrum esc 150a(kraton v 5 6s) All details are listed below. If you have any question feel free..

[@burn1gotbeats]

subscribed

[@g.b-MTB-trail-jumps3062]

Thanks champ

[@GeloOfficialPR]

Would this work with 3s Typhon BLX V3?

[@g.b-MTB-trail-jumps3062]

Thanks for coment champ. The conector conected to the rciver. But you need to check the volt of yor esc. The fun its between 5-8v Check. If you have more question i wil hapy. Thanks

[@dutchloveRC]

"COOL" !! lol

[@g.b-MTB-trail-jumps3062]

Thaks maye

[@AnthonyBencomo]

12:24 you should have stopped the music afterwards.. you farted lol

[@g.b-MTB-trail-jumps3062]

Thanks

[@kaycee9337]

Oh no i can't do this 😲

[@g.b-MTB-trail-jumps3062]

Thanks

[@wankksh8454]

Likw....creative👍👍👍

[@g.b-MTB-trail-jumps3062]

Thanks mate