ARRMA MOJAVE GROM CASTLE CREATIONS MAMBA X2 COMBO INSTALLED

[@RCRoads]

Super! I really like how organized you are. Your digging deep into the Grom and we are all learning great stuff. I like how you were able to use a stock motor mount. 👍👍⚡⚡🏆🏆

[@MrMeDos]

Thanks bro. I just enjoy these guys. So simple to work on. The mohave is the best one yet! Handles amazing with the extra power..

[@YungStun]

Yoooo.. Dem boi’s str8️⃣ fire 🔥 ok,ok you forced my hand 🤚 ordering mine right now!! Going for the Red joint 😎

[@MrMeDos]

Yessir.. get you one!

[@kolasaRC]

That's what's up. good job on the content. this video made me sub keep em comin. from Alberta Canada ❤❤❤❤❤❤

[@MrMeDos]

thanks for the sub bro. for sure, I'm locked in..

[@boxer951]

Thanks to this vid, I ended up buying the black wheels for my mojave grom red and black version. Ima have to cut the fenders tho since they do rub unfortunately. Keep them vids coming bro. Subbed

[@MrMeDos]

Stiffen the shocks or add a wheelie bar so that the wheelie bar wheels hit the ground before the body rubs the tires and you wont have to cut it. My green one i did not cut and it dont rub.

[@bryangadson-me9eh]

Great shit bro amazing info and has now made me want on and swap out arms from the granite to widen truck some

[@MrMeDos]

That exactly what i had to do.. why arrma made the mohave suspension shorter idk. But the widebody is where its at.. get the turnbuckles too.

[@bryangadson-me9eh]

Appreciate info i been waiting for arrma work flaws out im basically new to rc on mod level currently did a budget build of mjx14301 with max10g2 140a esc and combo motor 3652 3300kv 26t pinion 50t spur 4s run pb 71mph still tuning to keep stable, but is a blast keep content coming bro im watching midwest here​@MrMeDos

[@samuelmanning8867]

Awesome i have 2 of each Groms waiting on 1 mohave grom and parts

[@MrMeDos]

Yessir! So far i like them the most.. brushless unlocks a whole new world with these guys..

[@samuelmanning8867]

I did get the Onmi Terminator in I will try your paint out Thanks I stay to busy with my auto shop but I try to keep up with my RC hobby

[@skyhawk21]

Your tempting me to buy some castle stuff hahah

[@MrMeDos]

Trust me, its worth every penny. Get it bro

[@Shreddylife]

If you don't want to spend as much get a Reedy 280-SL4 motor with a Hobbywing QuicRun-WP-16BL30 esc. That setup will hit 60mph all day on a 3s and stock gearing. Only cost like $70

[@rayswinford5691]

Is your pinion 1/8 bore and where are you getting them

[@MrMeDos]

One is, got it from ebay.. hot racing makes .05mod 1/8bore pinions. The other pinion is a 5mm bore with a 1/8 sleeve inside.. so i can fit 5mm bore pinions on my motor. Fits like a glove.

[@rayorcutt7934]

What motor mount are you running on The green one

[@Early_Lately]

👍🏿

[@justinterrell9555]

Is that wheelibar for the Grom or is it one that you made work thats for something else? Thank you.

[@MrMeDos]

link in description

[@edgardovera6490]

Hi, where did you get those tires?

[@MrMeDos]

link in description

[@edgardovera6490]

​@@MrMeDosAjajajaj thanks for all the information that's what happens to me for not searching 🤦🏻😅

[@Carson-n3t]

Hello there, i have a question. I'm running the same setup with a 1010 castle combo, my esc gets hot, noticed it didnt come with a fan. Zip tie a fan on top or? I was wondering if anyone else was having any issues as well. Running a 26 tooth pinion

[@MrMeDos]

Which motor are you using? Im running 4400kv with no fans on 26T in AZ heat with no heat issues. Check to make sure your not overloading your esc if your running lights or any thing or running multiple channels on your receiver. I noticed some lights draw more current and esc heats up. Could be your fan too.

[@Carson-n3t]

@@MrMeDosYea that's what I keep hearing! I have the 5600 kv version. I'm only running the servo and esc off the receiver. Ran about a quarter throttle for about 3 minutes with a few full throttle blips with no fan. I just picked up a random cooling fan from the hobby shop, might just zip tie that bad boy on and check temps after. Thanks for the info and letting me pick your head. I'm still kinda stumped lol

[@jonathansouliere8321]

No bec ? Do you have to use it

[@MrMeDos]

Its built in the esc.

[@rayswinford5691]

What pitch is the gearing

[@MrMeDos]

.5mod

[@Fishinmass17]

Can you share link for motor and ESC

[@MrMeDos]

Check out my other mohave vids, I have links in the description for everything. ✌🏾

[@alainmainville5546]

Part number HR motor mount ?

[@MrMeDos]

I dont have a HR motor mount.. i have arrma motor mount. Its a pack if different set sizes. Its on horizonhobby site for the grom series. They are cheap. Now my HR spur gear, i got that from my local hobby shop