Asetek Wheelbase Force Feedback Settings Guide

This clip taken from our detailed review of the Asetek Invicta and Forte Direct Drive Wheelbases takes you through the Force Feedback settings in Asetek's Racehub software.
Watch our detailed review here:
• REVIEW - Asetek Simspo...
See our comparison of the Forte and Invicta Wheelbases here:
• HEAD TO HEAD REVIEW - ...
#asetek #directdrive #forcefeedback

[@erikduran5413]

I just got my Invicta gear and what an amazing kit. It’s incredible the difference coming from a Moza R5 and SRP pedals. Within 5mins I was cutting 2.5-3 secs a lap. You are correct in that the 27nm is not needed, at all! The fidelity through your hands is remarkable. And that brake pedal is just magic. I had modded my SRP pedals to feel pretty decent compared to a lot of other pedals on different sims I have sat in. But that Invicta pedal is just amazing. Trail braking took some getting used to, but holy hell, what a difference. Like Andre eluded to, stomping on it and pulling back your toes as you glide in is just an unworldly good experience.

[@guitartube5822]

This is literally me at the moment, deciding what to go to from my Moza R5. I’ve also modded my cheap pedals out and I’m doing pretty decent, but I feel I’ve milked it for all it’s worth. Torn between Asetek Invicta, or Simagic U. And whatever I go with I’ll go with their pedals and so on. Curious if this is still the best choice you’ve made kind of thing.

[@erikduran5413]

Guitartube, I still swear by Asetek. I’ve gotten to drive a good few sim setups. Unless you are plunking down ungodly amounts of money the Invicta series still wins out IMO. For the WB I’m running slightly modified V2 settings. The V2 settings make the wheelbase feel significantly stronger. The pedals continue to amaze me. I’m currently on the long travel, but with an orange insert. It feels the best to me. I’ve been using track titan as a teaching guide and my times have dropped significantly. Reading data and implementing it into how you approach corners, drive out, and exploring the outer limits of the track have been game changing. The toe lift I refer to from Andre is absolutely paramount. On most tracks I’m within the top 100, if not the top 25.

[@erikduran5413]

Last note…you had better have a chassis that can handle the Wheelbase and pedals. I’m currently on the SimLab P1X pro. I did have to modify the mount to make it work, but it’s solid as a rock. Added the SimCore Asetek front mount then drilled the base of the standard simlab mount. Tightened down it’s perfect. Obviously there are other options, but this was my call.

[@koenmeijs3627]

Hi Will, thanks for the settings! How do you set the force feedback in iracing? Maximum force at 27 and then auto calibrate the force feedback? Little help would be greatly helpful 😅 Thanks

[@MrLaBrink]

Could you please share your in game FF settings as well ? (ACC) just received my Forte base, and would like to try your settings as a baseline.

[@buddy5088]

Hey Will, I purchased the Invicta wheelbase and Forte wheel 2 weeks ago. I used your Code “Boosted” for your discount. Thanks bud! In this video, you mention that you run 0 Torque Behavior Reduction in IRacing. I tried that setting but it feels clunky and notchy. I’m forced to run it at 2-3. Do you not feel that with your wheel? It’s very noticeable even when driving straight and swaying the wheel back and forth. The best way I can explain It is… it feels like running your finger nail through a comb. Curious if you feel this in your wheel. Thanks in advance.

[@reviewforthetube6485]

How are all of your wheels so silent? I mean usually you can hesr the vibrations through rigs and or the bases yet yoyrs always sounds silent im guessing its the rig? Or cameras and mics have an issue picking up on dampeend vibrations.

[@alberto0]

Are you using the same settings on iracing as you are using on ACC? And how do like it compared to the asetek suggested settings for iracing? PS could you share the FFb setting you have on iracing

[@anthomaynard]

hi if you play at 12nm why not take the prima I have the invicta and I was told that you have to put it at 100% and reduce the ffb in the games otherwise we don't take advantage of all the details and we transform the base invicta in the prima because I'm a bit lost thank you

[@jannikharing3814]

Do someone have good settings for rfactor2?

[@Cliffybee]

Hi, Is anyone experiencing random low torque mode being activated while on ACC, I`m on the Forte wheelbase.

[@emreturkeli]

Hi Will thanks for the great support and videos! I just recently received my La Prima Wheelbase from Asetek and would like to use your settings as a starting point but one key thing that I'm missing is what are your in game settings for ACC? It'll be much appreciated if you could share those too.. There are some people who recommends to set things to 100% in game, and tune everything on the hardware menu side, and there are some who recommends setting things to 100% on hardware and do the tuning to the FFB on the gaming side... Not sure which one's the way to go for my Asetek La Prima + VRS Force Feedback Pedals Combo... Thanks in advance..

[@mr1k666]

My slew rate on invicta base only goes to 9.4 not sure how your one goes to 9.5 strange

[@RuardtRudiProzesky]

I am so frustrated with Asetek. Trying to play Automobilista 2 and Asetek is not supported. Spent an hour trouble shooting online, got nowhere. It would be very helpful if you mention these product compatiliby issues in your reviews. I am regretting my purchase.

[@thomasrunyan1944]

The recommendations on the Asetek website blog didnt help? Did you email support - curious what they said.

[@RuardtRudiProzesky]

@@thomasrunyan1944 They sent me a long PDF full of special instructions needed to setup wheelbase in AMS. Did work, but why did they not send this without me needing to ask. Also Dirt Rally 2.0 needs a special set of instructions and back end interventions as well to work.

[@thomasrunyan1944]

@@RuardtRudiProzesky I agree, I would have expected to find those types of PDFs in the knowledge base on the website open to all the users but that is not the case. I am still struggling to get Forza 4 and Forza 5 to work properly. Will did a video that recommended using Emuwheel and Vjoy but when I try to configure Emuwheel it immediately assigns the x-axis and wont let you assign anything else. Not found a solution yet but I keep looking.

[@RuardtRudiProzesky]

To add to the Asetek wheelbase frustrations of requiring different and unique interventions to work on AMS 2 and Dirt Rally 2.0 (non-exhaustive list), I get a "Voltage too low" message and force feedback cuts out. I've reached out to their team and will wait the usual 2+ days to hear back from them. Yeah, I'm not a fan of Asetek at the moment.

[@mosey4650]

excellent video Will - i've (finally) got my asetek LaPrima wheelbase and wheel mounted to my rig, along with pedals. Tooks some time for logistics! Is there any reason not to copy your ACC preset for my first-go of using this with ACC? only obvious difference i see is Overall Force(i can only go to 12)

[@Ronski_]

Do you recommend irffb in iracing with these high end dd wheelbases?

[@thomas6063]

No. I tried it and it felt terrible. Remember that Asetek already has tech built into their wheels which you can conveniently adjust in their Race Hub software. It works perfectly alone.

[@anthomaynard]

what song your settings in the game acc a photo if possible thank you