Upgrade Antminer S9 Pro (6 board) 21Th S9Dual

[@vasilepreda8632]

And where is the advantage? Why not mine in parallel with two unmodified? Or if you want it to be more quiet, why not slow it down from 13.5TH/s to 10TH/s? From the calculations, with an original one you get $ 90.72 today, and with a modified one you get $ 133.97, excluding electricity. Why would I care about life time? These ASICs are obsolete anyway. Can I use the 6 boards version at maximum power 27TH/s, with additional cooling and double power supply? Does anyone know in this case what would be the consumption at the outlet? Thank you.

[@awidesigns]

I run a S10 (s9 dual) as well. I added the extra 2 fan headers so i have 4 fans and run it off a 2800 watt server power supply so i get the full 30th + out of them. i also run another with 2 bitmain power supply's. Less configuration is really the only benefit.

[@solharvester2341]

Whoa. That's like a 60% increase in hashrate with the same wattage. Dude, that's awesome. So you're getting about 68 watts per TH. Normally an S9 is around 98 watts per TH. So I could do something similar with two S9j's and get closer to 23TH/s.

[@limchewhong]

may i know where can we get the bitmain S9 Pro sticker?

[@alecioalmeida8876]

the s9 is 13t / h because with the 6 plates it didn't work at 26t / h? on the stamp you put 20th?

[@florinadrian7957]

what voltaje do you use ? the only difference from a normal underclock is that u use a single computer for 2 ants basically ?? my opinion is that what you win by using just one computer you lose by using just one psu . ( the psu has the best randament when using only 50% ) , have u tried using the same configuration with 2 psu's ? haw much does one computer consume ? thank you very much !

[@johnnyboy2459]

So theyre "0402 SMD" resistors at 4k7 value?

[@EduardoAlves-fd2eo]

goodnight.. Do you know which font to use instead of the original?

[@vincentchamberland8935]

What are the cable for powersupply that you need to get? the yellow and black cable

[@AnonyVaderStudio]

I have the same question did you get any answer?

[@ItzJ4kE]

Did you guys find any info?

[@davidthetuber]

Can I disable the fan entirely to run in an immersion fluid?

[@WhiteTrashJeff]

U got to plug in a fan simulator so the board thinks it controlling a fan you can get two for 20 bucks off Amazon.

[@ChristopherColina-i1q]

A question. To join both, do you have to do some configuration? Or do they automatically lower their consumption? because when connecting 2 the original power source would not support them

[@michaelmadison883]

Does this need to be apw7 instead of apw3?

[@erichkrauz2225]

Can you please send a link to the power cords

[@TheMrLorem]

Hey, can you upload correct picture? The old link dont work

[@axelbreier5464]

Good morning, just 2 fan ? And why change the power wire from power supply?

[@tomk1728]

why only connect 12 power connectors to cards? and not all 18?

[@dare2scheme904]

Thanks for the instructions, it worked 👍

[@michaelcasey3809]

What model s9’s does it take to make this? I heard ya can’t do it with the k model

[@salahmahmood7141]

Hello, is the power supply sufficient for two devices?

[@YipperX5]

Wait. You took two 1500w units and ended up with a final product that still only pulls 1500w?... also the bump in hashrate was much smaller than I expected.

[@ylembana]

i already foollow as instruction for antminer s9 modification on video but the all hashboards connected to the new 3 socket all error of set PIC flash addr how to fix it

[@Chris-lw1jf]

where do you get the sticker L9 pro

[@mugetsu213]

I tried the pro firmware you linked , everything works except the manual config in the auto tune. When ever i set a manual settings instead of a pre determine profile it says wait 30 sec over and over and never starts the auto tune . How can i fix that ? Thank you

[@Trykastclan]

its is working its autotuning it can take a while just let it run till it found its good settings

[@gymkhanadog]

Wait a sec... So you're running 2 units together but getting lower combined hash rates than if you just ran 2 units separately? Is this because you limited yourself with power by using a small/the original PSU and don't have 1/3rd of the hashing board powered?

[@ggfien9373]

He under volted them. You can get 9.5-10TH at 800ish watts with proper firmware. So he did that times 2

[@ramonnavarro2440]

hello, what do you recommend to mark the hash board? It is so that they are not confused with other people hash boards. the issue is that my customer needs the mark not to be erased with the cleaning maintenance, he thinks his hash boards are being changed. Thank you

[@michaelmadison883]

will this work with braiins+ like this?

[@charlie_goldschmied]

Unfortunately not

[@timruyle6813]

Does anyone sell these modified boards? I'd love to purchase a couple from someone who knows how to perform the upgrade. My soldering skills will not allow me to do this work.

[@TravelUnplugged]

Can s9k do this?

[@waynehargrove8124]

Can the S7 run in dual mode, it has the extra ribbon slots on the control board, but I can't find a dual mode firmware, could you use S9 dual firmware ?

[@ddk4664]

Does it overheat losing 50% of fans ?

[@AnonyVaderStudio]

Why did you change the PCI cables are they any different or just putting fresh one? Thanks for the amazing video

[@salmantechrepair5553]

You can keep them bro

[@michaelmadison883]

what is the liquid you used before soldering the 18 pin connectors

[@conundrumatic]

Flux

[@alishaalisha1220]

Чи можна приєднати 9 хеш плат на одну контрольку? Роз'єми додаткові є.

[@infotainment6010]

what kind of cables do you replacing from original cables from power? because original cables are 10 males, but looks like you have 13 males on new cable. where do I get those 13 pcs cables?

[@bgasolder]

I make cables for 13 connectors myself

[@infotainment6010]

@@bgasolder can you share information on that one? is it possible?

[@salmantechrepair5553]

He replaced for new one just like that

[@bestof4u2c71]

Is it possible to order the modified control board

[@yolochnaya]

Здравствуйте! Где взять косы для бп с нужным количеством разъёмов?

[@ГаражнаяКоррозияМеталла]

Со второго бп перекидывают

[@robsonbezerra9313]

Muito legal, mandou bem

[@TheHarpanOnly]

Is there any modification in the power supply unit?

[@salmantechrepair5553]

No

[@kirillkislitsyn1195]

Вы видео исправили уже? Ребята сказали что у вас в видео неправильно показано что куда паять.

[@moh050]

It will work with s9k??

[@zouzou5851]

at 4.46 resistor are not mounted on the correct chain. the lower resistor should be on the top

[@tcarp77]

Firmware and grill drawing links don't work

[@tanteakpin4279]

where can get 13pc 6pin cable.

[@СашаСашков-л8у]

Asic L3+ реально повторить???

[@richcollins513]

Will L3+ Do this too?

[@TravelUnplugged]

does this still work?

[@DiyintheGhetto]

I don't get it on not applying power to the back of the hashing boards, Can you please explain to us?

[@bgasolder]

the power of one hash of the board is 250W, two connectors are enough

[@DiyintheGhetto]

@@bgasolder ahh okay thank you. What size of wire are they?

[@AnonyVaderStudio]

@@bgasolder hey man I subscribed to your profile I would appreciate if you put a video on how to make the cables I think I can imagine how but it helps to see a pro like you 👌🏼

[@zoriTs1]

@@AnonyVaderStudio You can buy extra CABLEs on aliexpress - loook for BM harness

[@AnonyVaderStudio]

@@zoriTs1 I’ll check it out thanks 👌🏼

[@sirotin182]

такой вопрос а блок на 1600 ОБП пойдет если по одному разъему на ХЭШплату подсоединить проблем не будет?

[@eriksalo4603]

Can I buy one from you plus any extra cables I might need

[@MrCICKI]

подскажите пожалуйста при пайке что вы используете как называется(жидкость, и металл) ? буду сам делать не разбираюсь в этом

[@ASICCLUB]

Самый простой флюс, можно по старинке канифолью паять, кому как удобнее

[@MrCICKI]

ASIC CLUB спасибо

[@BaCkDoOrKaiN]

really works with only 2 pci-x each?

[@kalysisaev2484]

вопрос S9+S9J можно соединить два разные

[@marcusang3735]

Hi master can t9+ do this too?

[@salmantechrepair5553]

Yes

[@af6727]

@@salmantechrepair5553 hello! what resistor size I should use with 4k7?

[@СтаниславАлександрович-с4м]

Теперь схема в видео верно нарисована? Ошибок нет с резисторами..

[@ASICCLUB]

да, под видео есть ссылка на изображение с исправлениями

[@maksfedor5931]

а разьемы не в обратную сторону защелками надо устанавливать ??? или без разници

[@ASICCLUB]

разъемы должны все стоять одинакового

[@The1969color]

что за прошивка у вас стоит

[@loki9860]

Добрый день, а какие элементы идут в обвязке к разъемам на контрольной плате? откуда брали?

[@ASICCLUB]

Юрий Loki только резисторы 4,7к и разъёмы

[@НиколайМальцев-ж3ф]

@@ASICCLUB а нет ли случайно ссылочки на алиэкспресс с разъемом?

[@ASICCLUB]

резисторы на 4,7 кило ома

[@vevnumber3950]

I see 9 slots on the control board. Looks like you can connect 3 together and control them with one control board. If so would you please make a video conducting that procedure and would you also put new overclocking firmware in the description? (If that's possible.) Thank you for your time and knowledge have a great day.

[@dsdadfera9244]

J1, J5 and J9 apparently these ports do not work

[@evgenyarkhipov3051]

Здравствуйте,подскажите,пожалуйста из какого металла изготовлена решетка на выдув?

[@ASICCLUB]

Сталь 1,5мм

[@filipzawadzki9424]

Why not just use low power mode on two S9?

[@spod2011]

Do you need a custom firmware to make this work? Is there a dev fee?

[@salmantechrepair5553]

No need

[@torryjames5016]

Any chance u sell the s9 pro control board??

[@charlie_goldschmied]

search the internet, there are some shops who sell this!

[@rogermillo8382]

Its possible to boot from the network? instead of sd card

[@bobjed7867]

Any way you can solder my board for a free? I really want to do this dual setup. Let me know

[@diagnosticbox]

Здравствуйте. Прошивки что вы выложили они с devfee?

[@ASICCLUB]

Здравствуйте, да есть 1%

[@evgenyarkhipov3051]

Приветствую, решетку на выдув сами изготовили?

[@ASICCLUB]

заказывал лазерную резку, в описании есть чертеж

[@evgenyarkhipov3051]

@@ASICCLUB Понял,спасибо!

[@chachotu2]

Can you sell a modified board?. Can i use a s9 13.5Th and another s9 14Th?. Thanks.

[@chachotu2]

I want qnother one? Will you made it?

[@northerncryptonian4805]

Is it possible to do this with 2 x A9 Zmaster?

[@gymkhanadog]

Yes it is, and they hash faster than the sum of their parts.

[@northerncryptonian4805]

Wouldn’t this require custom firmware though?

[@gymkhanadog]

@@northerncryptonian4805 Nope, you just need the latest version of CGMiner for the platform that has multiple I/O enabled. Either the latest A9 firmware has it or the A9+ firmware has it. A9++ uses an even newer version of CGMiner but it's really sucky and unstable, even on the A9++.

[@alexeybayev2439]

Только мне интересно зачем это все надо ? Взяли 2 асика по 14 хэшей и превратили его в один на 21 хэш. ГЕНИАЛЬНО!!! А нельзя было просто в прошивке поставить по 11 хэшей каждому ? Или лёгких путей не ищем ?

[@LadaGrantaRemont]

Это называется, когда их у тебя много, а мощностей по резетке больше нет!!!!

[@alexeybayev2439]

@@LadaGrantaRemont когда у тебя их много , а мощностей на розетке нет, то берешь и ставишь пресет на 11 хэшей

[@LadaGrantaRemont]

@@alexeybayev2439 за электричество все равно больше будиш!!! Посмотри видео полно на эту тему!!!

[@alexeybayev2439]

@@LadaGrantaRemont нахер мне шото смотреть. У меня есть асики и есть ваттметр. Мне эти теоретические изыскания не интересны

[@gladrags666]

Work on s9i?

[@ASICCLUB]

Yes it works

[@ironhead320]

Why do they have to be the same

[@ronalzambrano4697]

amigo que puedo hacer si el minero me muestra una temperatura que es totalmente falsa, es decir tengo dos s9 y mientras uno esta en 75 c el otro esta en 86 c. pero en una sola placa. aconséjame

[@shillymart2973]

Tal vez no sea lectura falsa. Sucede seguido.

[@ASICCLUB]

Pay attention to the fans, they must be the same

[@stalkerzov58]

Чето я нихрена не понял ) для этого не нужно по три пина на плату соединять ? достаточно по два ?

[@jw_638sp]

Ток большой контакты обгорают. У меня просто на s9 все 3 отходят, пришлось провод 4 квадрата припаять к плате и по одному штекеру включить.

[@griha888]

Приветствую! 3 s9 пробовали объединять?

[@ASICCLUB]

Здравствуйте, 3 не получиться так как процессор поддерживает только 6 плат

[@Daniel-hd6ih]

bratuhan, is it also possible with 2 antminer s9j 17th ?

[@salmantechrepair5553]

S17 still updated

[@jakeneale9966]

Is antminer s9 still worth getting today?

[@florinadrian7957]

depends on haw much you pay for el , if you have free el. like solar , wind , watermill , then the S9 has the best roi , sow if you have the free el in a remote lactation and you want to sell it but you dont have infrastructure to do it , mining is the only option you have

[@GunMuse]

@@florinadrian7957 I love how you list the 3 most expensive forms of electricity as FREE. you mean free to you not Free to make. If you actually owned any of these 3 you would be 1000's into sunk cost before the first watt was made and 1000's more into replacement parts before they are paid off. Just because there are those out there who believe if you don't pay for it directly its free don't confuse that with efficient or cost effective to pursue. My 5k battery system would disagree with you so would my 20k windmill. Nuke is cheapest and most reliable if you want to support this industry push back the world is going to melt bs. Tech in that industry has made leaps and even small towns have micro well power supplies now.

[@florinadrian7957]

@@GunMuse come on , you know exactly what i meant , or you want me to be politically correct :) , you are sow bored that you want to be picky with the words , then i tell you in my country the state gives you 90% of the cost you need to install renewable energy and if you want to be even more picky I sad if you already have it not to invest it.

[@GunMuse]

@@florinadrian7957 I pay 13 cents kw and make $140 a month per s9 and when you dump it into a trade bot you get an extra 50% per month on that. But places like california can run 20 cents because they buy solar. So yes I know what you mean. And i do mean personally owned or grid bought its not the cheapest form of electric. Just the most marketed form. If I was to call a S9 a HOME HEATER. vs a plug in heater how about calculating the electric you don't use to heat but the money you make to heat? Got to be picky as the common redit is no don't buy them. When during the winter they can be free in just 3 months exchanging them for an electric heater somewhere.

[@GunMuse]

I also got to say I upgrade my electric to more than 70% of standard to prevent 8 gauge wire from burning electricity. Every 12k watts on 6 gauge wire now reduced my energy bill 30% over 8 gauge. Lot more to cost than what you can google. As for this build runnign 2 1500 watt HP power supplies platniums at 70% and pulling 31th/sec just came buy to see if i could buy the grid vs making one. run the HP powersupply at 12.6 volts on breakout card chips will run cooler using less amps very very reliable. Adding a cable to a standard powersupply takes the math the other direction and limits the hashrate to do it.

[@civiprepper]

You can get 25TH but not like this. To overclock you need to change the firmware for liquid cooling and custom power tuning. Tin the tops of the chips. remove all casing and fans. Install one piece giant heat sinks to both sides to increase chilling surface area. stack all six boards in a wafer and drop into Dielectric chilled fluid taking consideration for a heat convection current. Its silent, you can run it on HP power supplies and for about 3000w you can have 12 boards pushing close to 50TH at sub 45C. Now The benefit of that rig is its very stable, its silent and it costs about 400 bucks all in for 12 boards. The enemy is still power consumption but its a good way to get into the game to flip a little cash into larger amounts.

[@sciencefic666]

is bitcoin mining worth still in these days? If you are an old school I can understand that was a lifestyle for you.

[@princeedward21]

I would like to buy a couple of those boards if you can make me two.

[@alexanderpumpalov9524]

were you able to buy the two you wanted? Im also looking for the same thing

[@sciencefic666]

I just realized that you didnt reply to any comments of your own video.

[@wtr381]

Awesome!

[@НиколайМальцев-ж3ф]

А какая прошивка?

[@bgasolder]

Прошивка в описании

[@НиколайМальцев-ж3ф]

@@bgasolder Спасибо

[@peric1790]

и это на родной прошивке?

[@ASICCLUB]

нет прошивку прикрепил в комментариях

[@bartiniusbart2054]

@@ASICCLUB ну шикарно,шикарно))

[@bartiniusbart2054]

@@ASICCLUB Шум на уровне z9 mini я так понимаю,по оборотам куллеров?

[@bgasolder]

@@bartiniusbart2054 гораздо тише Z9

[@bartiniusbart2054]

@@bgasolder у меня есть опят только с z9 mini. остальные асики увы,пока что не трогал руками)))

[@SoyTermiNestor]

One good way to waste 7TH😂

[@АлинаКарамель-в3л]

Скрытый процент есть?

[@ASICCLUB]

Во всех прошивках 1% донат

[@samanthapowell5882]

Now overclock this!

[@alejandrogu7525]

Mmmmm.... i get about 15 th from each s9 this sounds stupid unless you use a much bigger psu or 2 of them wich will defeat the purpose just ducttape them together then

[@umranarsu8843]

hello teacher, take it easy, I'm new to this hasbord repair business and I live in another country, can you help me with this repair business.

[@The_Kozhin]

Что за флюс?

[@S69Nik]

amtech nc-559-asm - можно и китайский для пайки и пропайки отлично подходит ,но для BGA лучше брать оригинал

[@mrbritcoinnakamoto2793]

i see no advajntage other than less ethernet cables its good but not quite carling lol 😆

[@JamesHarbal]

If your network logic boards go bad you dont have to buy more just combine

[@10456519]

Prefiero 27th no es lógico hacer eso

[@diagnosticbox]

И еще вопрос. А третий файл это что?

[@ASICCLUB]

чертеж решётки

[@johnnes-777]

@@ASICCLUB решетки же можно родные примастырить и кулера надо перенести и на выдув поставить!

[@francalvo2000]

done that with a V9

[@СтаниславАлександрович-с4м]

Удали ты эту фотку с видео!!! Там не правильно указано куда надо резисторы паять!

[@ASICCLUB]

К сожалению правила ютуба не позволяют изменять видео после публикации, правильную картинку я разместил ниже со ссылкой.

[@Daniel-hd6ih]

bratuhan, is it also possible with 2 antminer s9j 17th ?

[@ASICCLUB]

yes, S9j will work as economically as possible