Pulp Protection Simplified | Varnish | Part 1

This 1st Part of the video by Aspire32 is on Cavity Varnish, a part of an ongoing series for dental students' with an aim to help them understand the various clinical situation for placing a dental cement base under restoration for Pulp Protection. This video concentrates on a specific clinical situation why and when the dental varnish should be applied and the mechanism of pulp protection provided by the same. Pulp Protection is an important topic from Endodontics and Operative Dentistry. Easy dentistry at Aspire32 helps grasp such topics of Dentistry in the simplest possible way for dental students and dentists.
This video of Aspire 32 is made by Dr. Suresh Shenvi who has cleared various exams like ADAT, NBDE from the USA, DHA from Dubai, and various Indian Entrance exams like PGI, KCET, NEET. I am MDS in Conservative Dentistry and Endodontics by profession. I am also an author of dental books on the entrance exam and I am also currently a faculty at KLE University and a receiver of best teacher award.
Click The Following Link To Subscribe To My Channel Aspire 32
kzbin.info?su...
Link for Complete Playlist on Pulp Capping ( Pulp Protection, Direct and Indirect Pulp capping)
• Pulp Protection - Varn...
Link for Complete Playlist on Pulp and Periapical Diseases
• Pulp and Periapical Di...
Link for Complete Playlist on Dental Composite
• Dental Composite
Link for Complete Playlist on Fundamentals of Cavity Preparation.
• Fundamentals of Tooth ...
Link for Complete Playlist on Glass Ionomer Cement and its types.
• Glass Ionomer Cement (...
#Pulp protection in cavity preparation, #Pulp protection liners and based, #Cavity Varnish, #Easy Dentistry, #Suresh Shenvi, #aspire32

[@TheJagadish2012]

Very nice videos...sir ..plz keep on uploading the videos at regular intervals....ur videos r more helpful to me...

[@Aspire32]

Sure. Will keep posting now regularly !

[@amuarshu]

Love your videos, Sir. Thank you so much for the pictographic and video information. :)

[@Aspire32]

So happy to hear. Hope you will check all 5 parts. Also do visit video section :)

[@raniaal-sameie9656]

Thanks Thanks Thanks a lot .. ❤❤❤ Finally I understand the varnish 👍

[@Aspire32]

Really happy to hear this. I hope you will Subscribe to the channel too. Do check the whole series on Pulp Protection. Here is the link kzbin.info/aero/PLdPsg6P-6Vlezs_0ZaBoOU7u9OC_KlVma

[@shamsurrehman9004]

Genious love u sir please upload many video best way of teaching

[@Aspire32]

Thank you. There are over 50 videos. Hope you will check them. Do Subscribe to the channel :)

[@tifanafathimah6178]

Thank you sir... nicely explained....

[@Aspire32]

Thank you for watching the video. Do check latest views too :) My favorite one is Dental Ceramic and dont forget to subscribe :) Link for ceramic - kzbin.info/www/bejne/pmSYYXWrirt0gtU

[@salmaibrahim2053]

I have operative final exam tomorrow your videos helped me a lot, thanks Dr

[@Aspire32]

So glad to hear that videos were helpful. Good luck with the exam :)

[@shivangi2277]

Thank you so much sir for such a nice video ....❤😊

[@Aspire32]

Most welcome

[@jemimachatla7911]

Thank you so much Sir. It's very helpful. Can you please make a video on various types of Root resorption? If possible, Please try to include any clinical cases that you have seen

[@Aspire32]

Thank you for appreciation. Do subscribe to the channel. I know root resorption is a difficult topic. Will try to do for sure. Do check the other video. They will surely help.

[@md.zakirhossain1326]

Helpful presentation. Thanks a lot, waiting for next video.

[@Aspire32]

Thank you for the appreciation. Will do the next part soon !

[@Aspire32]

Do share the links with others :)

[@Aspire32]

Checkout the part 2 video. Just released :)

[@halimakhan90]

wow....such an amazing explanation sir...

[@Aspire32]

Glad to hear that.. do watch the whole series to understand the topic better. Here is the link kzbin.info/aero/PLdPsg6P-6Vlezs_0ZaBoOU7u9OC_KlVma Subscribe and share :)

[@halimakhan90]

sure Sir.I am in the second part now and am loving the way you explain everything.If any doubt then I will comment further.Like and subscribe already done

[@Aspire32]

Sure :).. There are over 40 videos.. Dental ceramic is the favorite one..Thanks for the positive feedback !

[@user-ib2ru7pm3w]

❤

[@Aspire32]

Thanks :)

[@ankitaparmar4795]

Sir you are just amazing👍😍.. No words.

[@Aspire32]

Thank you Ankita. But its the books and authors who are amazing. I am just explaining it my words :)

[@Aspire32]

Make sure you Watch all 4 parts of this pulp protection series. You will understand the topic better :)

[@nour.44]

THAT WAS AMAZING THX 💓💓💓

[@Aspire32]

I'm glad you like it

[@shrivathshan7083]

Very helpful video❤

[@Aspire32]

Pls watch all parts

[@shikhabansal9544]

Very helpful video sir. Plzz make video on access cavity preparation

[@Aspire32]

Yes. Should do that. But I guess it should be done on extracted teeth to understand it better

[@krishnachauhan5643]

Thank you so much sie

[@Aspire32]

Most welcome. Dont forget yo subscribe to the channel. :).. do share it with your friends group.

[@SohelRana-ox5rc]

Sir from now , will you make regular vidios??? Your videos help me a lot

[@Aspire32]

Yes. Hope to make it more often :)

[@Aspire32]

Do share the link with others :)

[@akshayorthodontist2901]

@@Aspire32 sir tell me whn we shd discard neoendo files . Criteria

[@Aspire32]

It depends on the case. Look for the flute opening. If the file looks distorted, if the blades looks flat its better to discard them.

[@Aspire32]

released the 2nd video. Check it out !

[@merhan9082]

can we apply light cured varnish after curing of composite on it's surface to act as stain resistant ????

[@Aspire32]

If you want to prevent staining then you can use an unfilled resin which is available specially for final application after composite. Its available with ultradent.. we dont use Varnish.

[@jtp5778]

Thank you for video! Has studies shown adding more than 2 coats of varnish making any difference in terms of chemical protection?

[@Aspire32]

The textbook mentioned two coats are necessary. The literatures may differ

[@aieshag9131]

how to measure gingival seat in class 2

[@Aspire32]

Pls watch this kzbin.info/aero/PLdPsg6P-6VlfNG3WIWxMLECoJarIv-HJo

[@akanshawadekar7430]

Heartily Thankyou so much sir, for making so many concepts clear ! I had a question, is their any shelf life of varnish ?.. if not then is it like a person will be more resistant to tooth decay ?

[@Aspire32]

Could you clarify the question a bit more ?

[@akanshawadekar7430]

@@Aspire32 yeah sure, did varnish gets damage with time ? Means what is it's durability ?

[@Aspire32]

The normal varnish which is applied below amlgam stays for 3 months

[@rajashekarkuruma5577]

i am studying in iti electrician 2 years course i will left from one year in anything happens happens

[@sheriferz]

As varnish consists of(resin) does it need a light cure?

[@Aspire32]

No. We dont polymerize it.

[@akanshawadekar7430]

M here with a question today, is it ok if we apply fluroide varnish under amalgum restoration ?

[@Aspire32]

Normal varnish is preferred because fluoride varunish is for external surface to arrest caries.

[@user-ct5qw5qn5j]

Thanks doctor. Q.Which the following material exhibit no adhesive qualities to the tooth structure: 1.poly carboxylate cement 2.zinic phosphate 3. glass ionomer cement 4.glass cermet cement. Q.The pulpal floor in class2cavity for amalgam in mandibular first premolar should be parallel to the gingival wall orthe occlusal plane of the tooth ? Help me for answer and thank you very much

[@Aspire32]

q - 1 .. answer is 2 Pleas watch the cement series.. All these questions will look super simple. here is the link kzbin.info/aero/PLdPsg6P-6VldTjajPjbmZWE9mK3hQRlfQ

[@Aspire32]

q - 2 .. occlusal surface. As per this reference www.google.co.in/books/edition/Concise_Conservative_Dentistry_and_Endod/9UWeDwAAQBAJ?hl=en&gbpv=1&dq=pulpal+floor+in+class+2+cavity+for+amalgam+in+mandibular+first+premolar+should+be+parallel+to+the+gingival+wall+orthe+occlusal+plane&pg=PA200&printsec=frontcover

[@saeedrkhan1372]

GIC and polycarboxlate?? Book says Noo varnishes...under itt.

[@Aspire32]

Yes

[@angelicafoster670]

thanks for the video Is there is another way to estimate remaining dentin thickness without x-ray ? like, measurements as a rule of thumb. Unrelated question, Is the strength of amalgam affected by sectional thickness and depth?

[@Aspire32]

There are some electronic mesurement devices. I am not sure about the name. They can help one to measure the rdt. Answer to your 2nd question is the thickness of the Amalgam. Depending on that minimum depth who be made. I have explained this in the 2nd part of this video series. Here is the link. kzbin.info/aero/PLdPsg6P-6VldA4PC0H0z54QVemWhi75Ke

[@Aspire32]

I got the device name.. Prepometer. This can help you to measure rdt

[@Aspire32]

www.google.com/url?sa=t&source=web&rct=j&url=vivalearning.com/member/da_review.asp%3Fx_ID%3D979&ved=2ahUKEwj8o7CancfrAhXt4nMBHfHwDc8QFjADegQIAhAB&usg=AOvVaw0bs4tVQ-7cnLGJksNcUFsG

[@angelicafoster670]

@@Aspire32 Thank you, Great series. I don't think that device is popular, i would be looking for it. do yo have a practical advice for students who don't have access to x-ray or prepmeter? my instructor told me to estimate distance by vision, but obviously i cannot.

[@Aspire32]

That comes with experience. I do check the floor depth and sometimes if the p Floor is too think it will appear pink due because the thin dentin reflect pulp colour

[@aniketpatil6322]

Which reference book do you use ?

[@Aspire32]

Sturdevant 5th ed

[@aniketpatil6322]

@@Aspire32 thank you, sir. Great video! Really helpful 👍

[@Aspire32]

Thank you. Dont forget to subscribe and check the other videos :)