ASRock Z390 Extreme4 BIOS Overview

Going through the BIOS on the ASRock Z390 Extreme4 Motherboard. Full review of the board: thinkcomputers.org/asrock-z39...
Pricing & Availability: geni.us/DT88 (Amazon)
Connect With Us!
Facebook: / thinkcomputers
Twitter: / thinkcomps
Instagram: / thinkcomputers

[@daraltkeksz1]

Hello thank you for video. I bought the same card and it does not recognize VGA and no internet. I have win 8.1 and installed some drivers but not all as they are for win 10. Could you please help what driver I should install. I had same problem with previous motherboard but intel smart connect technology driver helped but I can not install here.

[@MrLegendofnaruto]

How can I turn off the led lights?

[@boy10113x]

Can you do a overclocking video with these setting? i also have i9-9900k, need some help

[@aidan6627]

How do I get xmp to show? My xmp doesn’t show in dram configuration

[@dahon7981]

Hi how to enable Intel Quick Sync? i cant this option. And my ram is 3000Hz bus, but main only run 2133Hz, what should i do?

[@jonnybones5297]

I don't understand much of these things. I just assembled a pc for a friend of mine with ASRock extreme 4 z370 and 8600k. the BIOS is 1.30. should i update it? thank you very much

[@tristanhubacz2041]

If i have Windows 10 installed on a hardrive do I still need to get windows 10 on a usb or just boot from the hardrive?

[@itisbranden]

Thanks for doing this - its difficult because there aren't many resources online for this board specifically. A lot of stuff about the Z390 Phantom or Taichi, but barely any Extreme4 info! You da man, do a vid on overclocking it to help the community :) I know the ASRock settings are different compared to ASUS, Gigabyte, etc (thinks like LLC numbers are reversed, etc).

[@itisbranden]

Just went to your review and realized you covered OC there, woops

[@ProuargeGamer]

My Monitor say no signal detected?

[@DARKTHOR]

Where u can change the boot type from uefi to legcy

[@kris6609]

Does anyone have a fix to the issue where you can’t use the Ethernet for some reason?

[@FelixPatek]

thx. anyone knows which bios i need for the asrock z390 pro 4 ? cheers

[@charlesklein7232]

MORE INFORMATION found #4 I looked at the manual and yeah I found it after a couple of hours. I found it under Chipset Configuration and there are two different settings: Deep Sleep and Good Night Light. Good Night LED: By enabling Good Night LED, the Power/HDD LEDs will be switched off when the system is on. It will also automatically switch off the Power and Keyboard LEDs when the system enters into Standby/Hibernation mode. Deep Sleep: Configure deep sleep mode for power saving when the computer is shut down. I have Good Night LED enabled and the LEDs on my mouse and keyboard stay on even when the PC is turned off. I don't know whether it is because they don't have any drivers so the system doesn't recognise them or whatever but changing the Deep Sleep setting does help. But there are 2 different settings. One is enable S5 and the other on is enable S4+S5 and of course you can also disable it which was set as default. Do you know what is the difference? I couldn't find it in the manual. see all information below still trying to understand .

[@bukiegn]

Hey, i’m very new to building PC’s and i just built mine with this motherboard. Could you maybe make a tutorial on how to install windows on this motherboard? Or maybe like describe it here? It would mean alot! Thanks!

[@kris6609]

I know I’m a bit late but install a windows 10 boot disk image on a empty usb drive. Plug it in and boot and it should direct you to the windows installer

[@kris6609]

Look it up on KZbin for a detailed tutorial

[@lukasschmidt9555]

The thing with asrock bios, is that they sometimes can be overwhelming with options which some times is not a good thing if you dont know, but I love the ability to do so.

[@bonorbitz]

This is actually pretty nice when it comes to a BIOS... It could be worse: kzbin.info/www/bejne/ZpbbZIRpacmVZ68

[@Marvin-kb9rh]

the thing im here for i sthe freakin button to get into it

[@samdennis16]

How do i launch the BIOS?

[@thinkcomputers1]

Repeatedly press DEL when your system boots up

[@samdennis16]

ThinkComputers Thanks!!! Sorry, that was a pretty Newbie question.

[@thinkcomputers1]

@@samdennis16 Hey we all have to start somewhere, glad we could help!

[@aquatic5046]

ThinkComputers how do I escape the bios

[@user-wf9cu8of3v]

Can i change language to russian in bios ?

[@rozard5342]

на начальном экране биоса выбор языка

[@bonorbitz]

Wow this is a breeze compared to Gigabyte's terrible UI/UX on their BIOS.

[@OvertimeX86]

NVME raid is an important option which can be configured if you download the manual, sorry giving a 👎

[@NZTechArc]

Stop with the ..."You can go ahead and..." these are pointless words, YOU CAN GO AHEAD AND... replace these words with a simple "You can..."

[@charlesklein7232]

YOU NEED TO DO THIS VIDEO! i have information but dont understand but am working on it. you did reply so i know your reading. this is a copy of information. you need to know this or you will return your motherboard and it needs to be explained by the company. YOUR MOUSE WILL NOT SHUT DOWN! YOU WILL THINK THE board IS BAD its not! you will never buy from that company again. I WOULD NEVER BUY FROM GIGBYTE but finding this on anther board made me wonder whats happening. THESE ARE INFORMATION I HAVE FOUND #1 Sorry I am late but it is called ErP Support. ErP Support determines whether to let the system consume less than 1W of power in S5 (shutdown) state. When the setting is enabled, the following four functions will become unavailable: PME Event Wake Up, Power On By Mouse, Power On By Keyboard, and Wake On LAN. You can switch it off in your advanced bios settings, for further information please look into your bios manual. #2 After digging into the BIOS settings I found out the solution. I went to advanced/chipset configuration/deep sleep/ set to S4-S5. Thanks anyway #3 In BIOS, look for USB/Keyboard/Remote Power On and USB Mouse Power on, try turning off the mouse. Also try different usb ports. Manual located here: asrock.pc.cdn.bitgravity.com/Manual/B360M%20Pro4.pdf

[@charlesklein7232]

yow wow dude like maybe you should ask if your a college instructor or disco dan! its hard to pay attention to what your doing when im dsco dancing! i think you could have turned this into a 1 to 2 hour video. im sorry im stupid most of the time i return this type of crap because i cant figure it out. i dont know who they sell it to. i dont use windows i use Linux Ubuntu because im not going to call windows to tell them im installing things it like none their business and i cant image who would do it i have not used windows since windows 2000. i like that your modern most videos are really old like 1 or 2 months. ive been building computers for the last 20 years and ive seen everything fad away! im going to try to see if i can enter the new market i actually bought a used HP nice did NOTHING and i was happy but it was used and dident last. so im building. i hope you become a professional i would like to communicate with you. i just threw a gigabyte into the can couldent figure out how it works. if you want it call me! you could do a video on each section of the bios if your interested. you seem smart join us at the college. but were really boring!

[@charlesklein7232]

GARBAGE! THROWN INTO CAN! the mouse does not go out when you shut down the computer! this is like gigabyte. the only way to shut down the muse is to shut down the power by throwing the plug on the back of the power supply! i thought this was limited to gigabyte. DO YOU KNOW HOW TO SHUT DOWN THE MOUSE? is their some thing in bios this is a problem from gigabyte that happened 25 years ago and they never fixed it. this will burn out your mouse. hELP IF YOU CAN!