@@castandspear I wish.. lol.. already a stretch for 3 days in baja.. lmao
@fidodidoz3 жыл бұрын
Hello Jon, if you dont mind can you make a video of how to make hundle and muzzle similar to whats at end. 15:28
@stickypaddle64323 жыл бұрын
Your rubbers are probably too long.with the pulleys system the pulleys are limited to 1/2 the travel of the rope you pull too load it so too get maximum omph you would need to measure from the notch of the spear to the back muzzle then 1/2 that for the pulleys travel then divide that by (3 - 1)(for 300%) or (3.5 - 1)(for 350% and so on) 1200mm length from notch to back muzzle would be 1200÷2= 600 600÷(3.5 - 1)=240 240 is the length of one rubber with 350% elongation
@taoisttiger47023 ай бұрын
I'm a big DIYer I gotta get around to building one one day haha. Great video thanks!
@hatzisgoal3 жыл бұрын
Can we see a video how your friend made the muzzle(hole) on the second carbon gun?
@aguywiththerod4083Ай бұрын
Where is the finished gun footage?
@takiyurttan300911 ай бұрын
Very funny😂
@mikefue959711 ай бұрын
You never do reel line like this on the reel lol. The knot will be either pulled through or the barrel will break from any decent game fish
@loitubiera26342 жыл бұрын
any What kind of epoxy did you guys used for fill the barrel? Is there a particular brand or type ?? Thanks for postying.
@bobbystevens40872 жыл бұрын
Great video. I have an MVD carbon 120 inverted roller. There is no way to remove the pretension on the 1st band for storage. There is already a hole to the handle that I could open up a little if I needed to. Where can I get A-line anchor or a threaded bead?
@BestMLhighlights6974 Жыл бұрын
That's my dream gun I would like to test it.
@reybanalo8038 ай бұрын
Thank you for a clear illustration.
@enaliospearfishing Жыл бұрын
you bought the body from alibaba?
@Jonefishingtv8 ай бұрын
Thanks for sharing
@vitosky726510 ай бұрын
U KNOW what u doing! 😊❤
@thelearner59972 жыл бұрын
Hi, question: how thick is your Gun Barrel from the top of the Rail to the barrel's hole? 2.3mm or 3.7mm?
@castandspear2 жыл бұрын
I don’t remember, sorry
@deldarsinghrajput79373 жыл бұрын
Can i have one speargun please.
@yafreisirijomedrano6713 жыл бұрын
hermano donde puedo comprar el tubo en fibra de carbono
@lionellepean89124 жыл бұрын
I'm interested to order 1 of this inverted roller gun. I DM Kory on Instagram. Still no feedback. Need some help to get in touch with him please.
@castandspear4 жыл бұрын
I'll reach out to him
@chiaraazie69563 жыл бұрын
Thank you for this video! I am new to this and I am not english native speaker. Is it roller gun the same as rubber speargun or arbalete?
@castandspear2 жыл бұрын
Roller is a different set up than the traditional style
@hatzisgoal3 жыл бұрын
Meandros handle fits correctly with the track of the tube? Higher lower or both the same height?
@castandspear3 жыл бұрын
We'd have to ask Kory. This was a custom handle he made, but I believe it was flush.
@fidodidoz3 жыл бұрын
Hello Jon, if you dont mind can you make a video of how to make hundle and muzzle similar to whats at end. 15:28
@castandspear3 жыл бұрын
I'll see if Kory is up for it
@fidodidoz3 жыл бұрын
@@castandspear 🙏 it would be much appreciated bro.
@ArnaudDeSmedt4 жыл бұрын
Awesome tutorial video !! Are all the bands 18mm thick or only the black one and the white and green one are thinner ?
@castandspear4 жыл бұрын
DM @mr.californ1a on IG, he's always experimenting with bands. He'll have some ideas on what you're working on that might be better than this specific gun we discussed
@kevinpanggat38044 жыл бұрын
How do u insert the rubber band dyneema loop thru the mvd pulley?
@castandspear4 жыл бұрын
DM @mr.calofor1a on IG, he's the guru
@ahmedhacen34493 жыл бұрын
please can you tell ass what's the handle model ?
@castandspear3 жыл бұрын
He made a custom one modeling the meandros handle
@fidodidoz4 жыл бұрын
Great video... What do you think is better foam or epoxy...
@castandspear4 жыл бұрын
Boam?
@fidodidoz4 жыл бұрын
@@castandspear hhhh sorry foam
@castandspear4 жыл бұрын
I think epoxy, but you might want to DM Kory @apexspearfishingcustoms
@fidodidoz4 жыл бұрын
@@castandspear thx bro
@marcsayegh23292 жыл бұрын
How much does this gun costs ?
@castandspear2 жыл бұрын
Not being sold at the moment, just a custom build
@VidarrKerr2 жыл бұрын
This is a great video. Thanks man!
@castandspear2 жыл бұрын
Thanks!
@hatzisgoal3 жыл бұрын
From where I can buy this cuttlefish shape tube?
@castandspear3 жыл бұрын
Alibaba
@hatzisgoal3 жыл бұрын
@@castandspear any link of the company?
@valdoconceicao45394 жыл бұрын
What tube is that and what mvd ram head will fit it?
@castandspear4 жыл бұрын
Not sure, I'll reach out to Kory
@danielmedina46043 жыл бұрын
To get the barrel on alibaba, is it only bulk orders?
@danielmedina46043 жыл бұрын
And how can I contact the seller of these guns ?
@castandspear3 жыл бұрын
Ping @korymister on IG
@castandspear3 жыл бұрын
I believe so
@nickjohnson4623 жыл бұрын
You can get them individually. I got one shipped to Australia for $170 AU
@mauriziogiasan44113 жыл бұрын
top👍
@castandspear3 жыл бұрын
Thanks for dropping by!
@mauriziogiasan44113 жыл бұрын
@@castandspear and an MVD kit?
@castandspear3 жыл бұрын
That’s what he used on this one. For a better roller check out the mannysub
@fabrigasmaka82562 жыл бұрын
Thanks guys,very good video. I was hoping you would show how to set up.thr pully with the cord.