Assembling the BCS Chipper/Shredder Attachment

[@LilBerb123]

Very helpful! Thank you!

[@truehealthnow]

I took the output screen off the chipper and replaced it with three pins thinking that the chipper would produce bigger chips. To my surprise there was no change in the chip size ? Does this unit only chip one size ?

[@BCSAmerica]

The screens will determine how small of a chip is produced by keeping the debris within the chipper until it is small enough to come out of the screen - and there are 6 sizes: www.bcsamerica.com/product/chipper-shredder-discharge-screens The rods-and-rollers that are included along with the standard screen are traditionally used for greener or wetter material. They work well for things like corn silage.

[@truehealthnow]

@@BCSAmerica By taking off the screen and replaced it with the rods that were supplied in the tool box of the chipper, I would have thought that the chips would come out smaller, but they didn't. I only place three out of the five rods that were provided. That leaves a lot of space for larger chips to pass but that was not the result I got. I will have to try again when the branches are dryer to see if I get a better result.

[@truehealthnow]

@@BCSAmerica I also tried to feed the branches in slower hoping for bigger chips but still they are small. If there is some other adjustment I can make to get bigger chips I'm all ears. They way it is right now I can put my fist between the pins I put in place to replace the screen. Two on the ends and one in the middle.

[@josecatarinomorales8019]

Guaaau