Assembling Your NordicTrack 2950 Treadmill - Tech Tips from Best Buy

Setting up your NordicTrack 2950 Treadmill? An Agent from Best Buy is here to help.
Here's what you’ll need: the included hex key, an adjustable wrench, a Phillips head screwdriver, a flush cutter, and painter’s tape. Also, because of the treadmill’s size and weight you will need two people for the assembly process.
Skip ahead to moving your assembled treadmill: [9:19]
If you are having the treadmill delivered, make sure it will fit in your space: bby.me/9rn5yu
Replacing an old piece of equipment? Learn about our haul-away and recycling services: bby.me/lw738
Click here to register your treadmill: my.nordictrack.com
Shop NordicTrack products: bby.me/ww33z
Have a Best Buy Home Expert help you build a custom smart home gym. Click here for a free consultation: bby.me/6vq8k
For additional tech products and tips, subscribe to Best Buy: bby.me/Subscribe
#BestBuy #NordicTrack #Fitness

[@jasontorgerson2972]

Best assembly video I found for this product. Excellent.

[@BestBuy]

Glad we could help.

[@bigsteveob372]

Amazing job on this video, I never had to open the instructions... Thanks for all you do!!!!

[@RandyTWester]

It looks easy to move on a concrete floor. Could we see it go through a doorway and up a flight of stairs?

[@louielunch3172]

I tried your moving the treadmill step bay step. Can’t get it through a 36” door way. What am I doing wrong?

[@dennisfrere1757]

Super simple to follow along. Never once opened the manual :)

[@BestBuy]

Thanks for letting us help you with your fitness journey.

[@Luciferc19]

Tnx easy with the video. :D

[@MRIMan]

Great video

[@BestBuy]

Thanks for watching!

[@kevinluna3342]

Thank you

[@DavidSmith-ev9wg]

I have a second pink connector on the back of the console. It’s much smaller than the flat connector for the one I pulled through the right post. Any help?

[@dksuzierahman3679]

Hello, how do i register for NordicTrack purchased in Europe (Denmark). Please advice.

[@DrShmed]

Do you know the dimension of the box that the unassembled treadmill is delivered in?

[@Luciferc19]

was too big for my door, lol 😂 took out the things one by one and lifted the big part sideways to get it inside. it was heavy so i would recomend a friend to help you. My things arrived in the morning wensday and friends was at work. Also it will be way easier to asamble it with a friend, you can do it alone but ffs its anyoing. lol 😂

[@ANDREWOS93]

Anyone know how I disassemble?

[@ppersinger]

How do you remove the base covers once they Snap into place?

[@BestBuy]

The covers may require one person to gently lift the base up and a second to help manipulate the snaps out of place. Check your manual for details or contact NordicTrack support at my.ifit.com/MC/s/new-request.

[@RandyTWester]

They're held down by gravity. You lift the.

[@drodriguez3935]

Great video when they tell you not to tighten any of the bolts do not time any of the bolts matter fact leave them slightly loose… but secure because when you go to mount this big screen it may not fit(pressure on the screen support changes it’s shape when too tight) an that includes the cross bar that holds the tray keep things loose but secure put the tray on last an then run trough an tighten everything at the very end

[@VincentJaimes]

ATTACHING CROSSBAR: Use the L shaped hex wrench not the one with the red handle. The one with the red handle hits against the cross bar!

[@MoSec9]

No. The red thing is rubber or plastic and that prevents it from scratching. I wish I started using it from the beginning instead of when I got halfway.

[@SeanD808]

Step #9 and 10 are really poorly explained... video skims past it.... finally got it assembled.... wasn't too bad except 9 and 10... :)

[@fatimasvlogtv5590]

Like

[@simonuwu4562]

&i

[@medjaafmed6107]

You do not have many views give me your channel Haha

[@lindaleelaw5277]

So sidewalks don't work lol

[@1974dormouse]

Not in Los Angeles, the homeless use them all

[@dancedancewithmealove7828]

😡😡😡🤬🤬🤬🤬👿👿☠

[@zurigomez8026]

NO

[@vacendak99]

This is the worst Threadmill I’ve seen in my life. In 2 months I replaced the motor, the motor controller twice, roller front and back twice and now I have problem with the console. I’m junking this one. Let me tell you before I junked a X22i Nordictrack is a bad company with a bad costumer services, they also ship bad replacement parts. I don’t want another Nordictrack Threadmill not even for free!!!!