Associated Pro4 SC10 Unboxing and Review

[@positrondesign6514]

I picked up a SC10 2 months ago. I am an Associated fanboi, plus I also picked it because the body looks more like a scale model Baja / Trophy truck than most R/C Trucks. First thing I did was add a heatsink and fan combo to the motor... and changed the pinion from 15 tooth to 14. No overheating issues. I did have a handling problem of under acceleration the front would lift, go on 3 wheels and flip over if I turned too fast. Another YT video about suspension tuning suggested thicker rear shock oil. I talked to my local hobby shop and changed from stock 40W to 55W in back. The handling of the front end is greatly improved by adjusting the rear end!

[@sdjesus5918]

I just got the pro4 sc10 and its been amazing compared to the price with a losi tenacity tt pro, the pro4 sc10 comes with sway bars come with a center diff, add a heat sink with a fan and switch the receiver add a gyro swap the servo and you're set. it handles amazing compared to the arrma senton and a losi tt and traxxas slash this one takes the W, you can spend more on the tenacity but the pro4 sc10 keeps up with it.

[@PtsdRC]

Great music while showing the car off in your shop

[@DaveKoko]

Hey brother. Great job as always. Just subscribed and liked. Will def share with my friends

[@AJJAMStudios]

Awesome thank you! 😎👍

[@pitbullrcltd6252]

Always a pleasure checking in with your channel…. This particular RC (short course) isn’t my personal cup of tea but anyone considering one of these should be aware of the problems you uncovered and proceed accordingly… thanks for sharing….☮️~~~~ out!

[@kyhonjan]

Thanks again AJ for a very entertaining review. I bought one for my 10 year old son and despite its flaws it's a great entry platform. For its price you get a fully tunable race capable truck which means you can still progress through the hobby learning setups and tuning just like other more expensive trucks. A free tip to control squirrelly handling under power is to reduce toe out which is quite aggressive from the box. One can also play with shock lengths and preload to set the suspension for a more reward stance to transfer more grip from the front to the rear thereby reducing oversteer. There are a tonne of other setup options available to get the truck to behave the way you want to. One last mention is if your tyres are not properly glued you will have high speed tracking issues too. The suspension is setup for the stock tyres and if you get tyres with more grip you'll need to setup the truck to control traction roll. Keep up the good work!

[@AJJAMStudios]

Thanks for sharing your tips with us here. 😎👍

[@PhatPhinx]

its worth mentioning it has a center diff

[@beenstork]

That's the big reason i bought this one over some of the others. I really like that feature. My tires where glued fine from the factory also. I am still very new to the hobby so my opinion probably doesn't mean much but it seems pretty well setup from the factory. I had a cheap 1/16 scale brushless before my SCT10 and the difference in how the SCT10 handles is night and day. Its just so much more controllable and it doesn't understeer nearly as bad, which I think has alot to do with the center diff

[@homecrest51]

i love all your videos, very informative and excellent presentation. keep up the good work my friend.

[@AJJAMStudios]

Thanks, will do!

[@robertruiz5417]

Excellent video

[@rt66rc86]

Hey AJ! I looked at trucks in this class when I was considering SCTs. I'm glad that I picked the Slash Ultimate over the others though. I had excellent results in following your advice about getting the sand out of those tires that I hadn't properly sealed and vented! Thanks again for helping out a new guy there my friend! And know that after I picked up my new Maxx, the very first thing I did was seal and vent those big tires the same way you demonstrated on the others! Your reviews are top notch and very much appreciated, Thanks for all the support in this hobby for us new people entering this Hobby/Sport, we would be floundering if not for the sharing and thoughtfulness of folks like YOU! :)

[@AJJAMStudios]

You're too kind. We are glad to be able to help where we can. This channel is a group effort much of the time, and we all hold down full time jobs to help us afford this endeavor. However, we would be nothing without our subscribers, they are the ones who keep us going. Thanks for commenting 😎👍

[@2XRC]

Can’t wait to see the Tekno. And how you’re gonna set it up to Bash 💪💪 I am a short course junkie too! Their durability is unmatched

[@AJJAMStudios]

They are tough, to be sure. Looking forward to it myself. Thanks for commenting. 😎👍

[@apvgroup5i]

I have the pro2 version. Great little car. Very impressed. Does about 65kph out of the box.

[@RandomloserDK]

Good review. The tires on mine have held up so far(Running 3S), but they're only good on a solid surfaces, there's absolutely no grip on loose surfaces. Another reviewer mentioned that better tires and thicker diff oil did the trick. Also it's not a slipper, it's a center diff. The rest was spot on.

[@AJJAMStudios]

Wow! I did not know that. So far we haven’t had to tear into that. Thank you so much for sharing. Awesome. 😎👍

[@shaunodriscoll]

Really enjoy your videos nice and informative 👍🏻

[@AJJAMStudios]

Glad you like them! 😎👍

[@robertruiz5417]

Love your videos

[@ahoneyman]

From the descriptions I've seen online (Amazon, A Main Hobbies...) The 2WD sc10 comes with the dynamic vehicle control system and the 4wd does not. Perhaps Associated has updated the box?

[@jm4472]

Yes it should come with the XP-R4 “DVC” receiver. Weird it didn’t have it in there

[@mikeeklund18]

is it just me,but doesnt this look like a coors light can?

[@johnellefa]

Awesome video helped me with choosing, what's the green sct in the background? I picked up the brushed version since it was on sale and I got parts laying around home

[@VenessaKohler]

Hey AJ! I have a question, is there any solution to fix the problem with the shock to make it not like a spring? And also would the 550 Mega granite shocks fit on this car?

[@PakyuzRcMalaysia]

I plan to buy this but at the end i bought Losi tennacity tt pro. With a little extra price,it came with gyro,3 diff,aluminium chassis,lisenced race ready tires with lisenced wheel,130a esc,big bore shocks and lisenced bodyshell. And i use it on my local race recently and manage to get 2nd place,competing with some of the prokit .

[@AJJAMStudios]

The TT Pro is awesome straight out of the box. I’m glad you like it 😎👍

[@Boogie_the_cat]

The SCT10 has a center diff

[@RandomloserDK]

Just a heads up. My center driveshaft started rattling around when above ~50-75% throttle. It turns out the driveshaft is kept in place by a o-ring in each drive cup, and I've lost one of them. So when my drive shaft moved too far forward/backward it would start shaking violently(Almost looked like a skipping rope). It can be fixed by installing new o-rings(OD: ~6.5mm / ½"), I didn't have one, so I used a spring of the same size.

[@AJJAMStudios]

Great information. Thank you😎👍

[@outlawrc1243]

AJ because of your reviews I pick my rec trucks off you, I have 11 now lol

[@AJJAMStudios]

Wow. It’s an honor. Thank you. 😎👍

[@theoldculture216]

So how does it compare to the Traxxas ultimate? I can't decide between the two?

[@jayb3518]

I know this is an old video, but I think the other thing to take into consideration as it relates to your "value score" is that it's a sub $350 car. Comparing it out of the box with a Slash ultimate which is $500, is a little unfair. However, I do appreciate the review, and pointing out some of the issues that you may encounter with this truck, but for another $150 to $160 dollars added to it, I think it would be a real competitor to the ultimate and potentially surpass it in some aspects.

[@dang3402]

So true. He’s comparing a/ultimate that already comes with upgrades out the box and you’re right it cost like $500. His comparison was dumb. I have the team associated pro for. I love it. I can care less if it didn’t make his top 10 that’s his opinion

[@P3chcic]

Could You please review the SCT410.3 from tekno. I heard that it's one of the best SCT's, but didn't see any confirmation of that... You make great reviews!

[@AJJAMStudios]

We are doing a basket case build for that one as we speak. Look for it. Part 2 will be the running test for it. Thanks for asking. AJ

[@VictoriaJones-gy8es]

You said it has a slipper clutch Its a 3 diff setup, exactly the same as the mt10, so a center diff, not a slipper, but good review buddy

[@AJJAMStudios]

Thanks for pointing that out. Sometimes we miss a thing or two. 😎👍

[@VictoriaJones-gy8es]

@@AJJAMStudios No problem buddy It's good you took out the time and replied back Normally I don't comment on slip ups, we are human after all, I don't jump all over someone for slipping up like a lot seem to do these days, but in this case I thought it might actually put some buyers of thinking it's got a slippa instead of a centre diff Edit I'm ordering one next Tuesday, be my first adventure out of buggies, truggies, and the good old monster trucks, so my first short course truck

[@1nt3rl0ck]

so with different tires, shocks, remote and transmitter .. yeah it could be interesting , what about replacement parts availability?

[@AJJAMStudios]

We haven’t had any issues getting parts.

[@bobik1488]

theres a loud buzzing once i turn my wheels all the way to the left, what could this be coming from and how can i troubleshoot it ?

[@AJJAMStudios]

It is usually the servo reacting to the pressure of binding at the end of the stroke. If your radio has a way to adjust the variable rate for the steering, that should help counter the problem. I hope this helps.

[@Technoane]

Hi! Did you end up trying the Pro4 SC10 with some good tyres? I bet you would be a lot more positive about the driving experience with 3s with a good set of grippy tyres. The factory set is very slippery.

[@TiberiusCat]

Great review! It seems like the seller and/or Associated should address the gyro issue. With it stated on the box, I would think they have an obligation to send you the equipment. With a gyro, the truck should compare more favorably with the Slash and its gyro.

[@bryanclaerhout1772]

I bought one and sent an email stating that and they sent me a gyro Rx. You have to go thru their support website.

[@jackson86n]

Excellent review. I was gonna get this. Got the Slash instead

[@AJJAMStudios]

Did you get the ultimate?

[@Wild_Buggy]

Is this truck any good at racing or is it only good for bashing? I am very tempted to get this and start racing (don't have budget for anything more expensive).

[@AJJAMStudios]

Since we no longer partake in actual racing I can not speak to that issue. It handles pretty well and it is fast, but without knowing how fast actual race SCTs are perhaps that is a question best suited for the community to answer. Jump in here, guys, and help answer this one. Thanks, AJ

[@jonathannewman9558]

Do you have a vid of your top 5 trophy trucks, looking to buy one an would love your advice

[@AJJAMStudios]

We’re working on one. It may be a few weeks out. 👍

[@jonathannewman9558]

@@AJJAMStudios awesome, much appreciated 👌

[@cwatson42785]

Hey AJ what one would you choose between this truck and the losi tt pro? 👍 Edit also you mentioned changing out the arms on the rival MT10 to rpm ones? Rpm makes arms for the mt10?

[@AJJAMStudios]

TT pro gets my vote. Out of the box it is superior. Thanks for asking 😎👍

[@Ezduztube]

Hello! Can you do 3s on this truck?

[@AJJAMStudios]

Yes

[@romper4444]

Hey there love the channel and format of your videos! Really curious to know if you contacted associated customer support to inquire about the missing gyro? Is it possible you got an early release model that didn't have it or maybe it had wrong receiver installed at factory? I'd really like to know if this was a mistake or if associated is literally commiting "fraud" in their advertising? Let me know if you can, as I'm looking at this truck for a 4x4 sc truck and I want the gyro feature. I have the original sc10 2wd and it's been awesome and in my opinion has the most scale driving experience for a 2wd sc truck especially with that plush suspension. That's the most important factor in my RC decisions, is that scale driving feel. I respect associated's history and what they've done for the hobby and really hope they aren't falling the way of some other companies selling rc's from Asia. Keep up the great work(sorry for the long comment lol)

[@sambagogo777]

If better handling from a short course truck is what you're after then, in the UK at least, consider the FTX Zorro Brushless. It's dirt cheap compared to Traxxas Slash and has superior handling.

[@peteroneill6189]

I have the zorro and the sc10 , the sc10 is way more durable but the handling on the brushless zorro is better . But the zorro is the car that I spend more time fixing , although the parts are cheaper the the team associated parts

[@RacingTheClock]

at that price point looks like it has potential. tekno for the win

[@RacingTheClock]

probably wouldn't even take $200 to make it a slash killer. shocks decent tires and diff fluid

[@Rek_Rc]

I love that truck, that's my next truck. I'm told they are really good in the 10th scale sct racing world as well. Are they?

[@AJJAMStudios]

Tuning is really the issue here. Personally I prefer the Losi over the associated. But still a fun rig. I think a tire change will help with handling. 👍

[@creekcreeperrc7972]

Do you save your RC boxes?

[@AJJAMStudios]

We used to but after stacking 50+ boxes we had to get rid of them, space is a thing. Now we offload them as soon as possible. Thanks for asking 😎👍

[@epencrep]

Had high hopes for this truck since I had the SC 8.2e and loved it but I guess I'll be keeping my eye out for a different 10th scale Short course truck

[@AJJAMStudios]

With some love and attention I think this one might finally get there. The stock setup leaves a bit to be desired, and the lack of the professed gyro is a bummer, not to mention the cheap shocks, but overall with a few mods I think it might actually do alright. The question is, How much will it cost? Thanks for commenting. 😎👍

[@Paul-wz1tm]

You drive rougher than i do. Lol

[@lilsmurfdawg]

Don’t do a SCT shootout without the losi tenacity TT pro !!!

[@MrLilredmachine]

Okay, i completely respect the review is your opinion and what happened did happen, but we both know the shocks on this are the same as the MT-10. The MT-10 is one of, if not THE most durable trucks available right now. The point is, people will snap the arms off it and break the chassis in half before they break a shock. You had a bad shock out the factory, should have emailed Associated as it is definitely a factory deformity in the thread or was cross threaded when built. Swapping the shocks wholesale is completely unnecessary and sends the wrong message about the truck. It definitely needs *some* upgrades but the shocks are way, way down the list. Handling wise it is completley adjustable with triple sealed gear diffs and fully adjustable suspension so the box setup really isn't that important, but just 30k in the rear diff does wonders for it. A well setup one will eat a Slash 4x4 as the Slash doesn't even have a centre diff. 😂 The tyres are for a scale tread pattern and look rather than a high end performance. I suspect Associated figured that anyone looking to race this truck in an SCT class at their local track will already have a favoured tyre for the surface, and immediately bin the stock setup, as they would with ANY ready to run vehicle. Excellent video apart from those points though, and you are spot on about the box/gyro discrepancy.

[@fuse557]

It doesn't have a gyro.

[@dymensional9012]

You need to disable the stability control and it will drive way better.

[@kenzepher]

I’m personally disappointed with this video. My experience with the SC10 Pro4 was 10/10 this is coming from owning a Slash Vxl 4x4 and where I say slash is better for dirt racing when it comes to indoor clay racing. The Team Associated SC10 blows anything out of the water with a Hobbywing motor upgrade and a Servo. It eats slashes for breakfast I did experience the tire problem I had to Re-glue them but what people dont understand is that this truck was clearly made for indoor clay racing.

[@kenzepher]

Center differential with light fluid in ALL THREE differentials paired with a 2s high kv motor on clay. This thing couldn’t be any better.

[@The_RC_Guru]

@@kenzepherI’m in agreement with you.

[@Boogie_the_cat]

So you expected AJ to have an indoor clay track that he just hid from us for the past 5 years ? Or maybe he'd build one just for this truck? Does it say on the box that it's an indoor clay track short course truck ? No. The manufacturer would be stupid to give it such a designation that would turn potential customers off from buying it. That's like buying a full size car to find out in the small print that you shouldn't drive it over 50 mph. Have fun at your indoor clay track, I hope it's a big nice one, because it gets boring only having one location to drive in. Seems like the truck is a dud, especially when you have to put in a different motor and servo. Just buy a roller at that point, a roller with better handling and a sound design, not a poorly engineered Faberge Egg that doesn't work unless you replace half the electronics and run it in one place that most people don't have access to. What was it again? It only runs properly on a clay pigeon shooting range, because it's so well made that it's a jack of one trade and only the most specific and limiting tracks are appropriate for its delicate tendrils of jank ? Sounds like a real winner, I'll really have to pick one up and take it to the local firing range, crash into some Clay Aiken Pigeon Flock of Seagull concerts. It'll be a "blast" if you get my drift. Have fun with your delicate unique snowflake that is too beautiful for the real world.

[@The_RC_Guru]

@@Boogie_the_cat buddy you got some deep unresolved personal issues. Have you considered counseling?

[@acecapone8086]

​@@The_RC_GuruSMH

[@kennysilvers-z4x]

Destroys Traxxas in every way!

[@kkoratda]

The fact they they lied about what's in the box is just too much.

[@kevinjhonson5925]

Ready to run garbage. I will never buy a RTR. Cheap shocks poor quality control and false advertising. The last issue alone should make it a zero across the board. high end rc should never be RTR.