Good install m8, that's exactly how I did mine last year and had no problems. Now you can know if you ever have a boost leak and when you get it mapped you can make sure they don't push to much boost through it which can snap a rod
@mastersmods3 жыл бұрын
Thanks mate, is yours mapped?
@darrenmicklewright20083 жыл бұрын
@@mastersmods yes m8 had it done about a year and half ago from a local mapping place . I think it's only stage 1 or 2 but it's set to the mods you have on the car and boy has it made a difference and it cost half of what most places charge and if your not happy he will just put original map back on and you don't pay. The boost now hits 20-21 psi tops but when it comes in you know 👌
@mastersmods3 жыл бұрын
@@darrenmicklewright2008 sounds good mate, I can't wait to get everything sorted they way I want it
@lewisgreen1725 Жыл бұрын
Finished building mine this week mot Monday will be doing this straight away thanks for the video help 👌🏻
@mastersmods Жыл бұрын
Mine has mot Monday too 🥴 good luck with yours mate. I'm dreading mine 🤣 happy to of helped too. What style holder you going for?
@lewisgreen1725 Жыл бұрын
@@mastersmods pretty much identical to yours, got it mot’d yesterday and I prefer it to both facelift and prefacelift orange st’s ive had due to the billstiens shocks and full suspension ive done but once ive ran new engine I’m hoping to get it to 400+
@darrenmicklewright20082 жыл бұрын
You should think about buying the double gauge holder so you can install a coolant temp gauge aswell as there is not one on the astra which is pretty shit on a turbo car. But the good thing is as you know what all the wires are now you will do the temp gauge alot quicker now as it's basically the same to set up but just screwing in a new temp sensor but on the astra there's a spare threaded hole next to the original sensor in the head so you just pop it in there for perfect temps all the time "not like people usually do when they tap into a hose which is less accurate"
@mastersmods2 жыл бұрын
Ah nice one, I did wonder if that was possible and if it was, how I'd go about sorting it. Cheers dude I'll defo be looking into that
@darrenmicklewright20082 жыл бұрын
@@mastersmods yes m8 my temp gauge matches my boost gauge and was half the price and came with the sensor. Just look at the side of the head where your battery is and you will see your original temp gauge and next to it you will see a little square shaped bolt next to it about a cm to the front of the car, screw that out and the sensor straight in then it's just the same + and - wires to the same place as the boost gauge. A good excuse for a new video 📹
@mastersmods2 жыл бұрын
@@darrenmicklewright2008 sounds good mate nice one 😜
@dnurdsx8 ай бұрын
This sounds fantastic to do. I've lost my secret menu on my VXR so need to fit a temp gauge deffo! This sensor you're talking about, does it come with the temp gauge or do I need to buy it separate? And if so.. What sensor fits right into the hole already there? Thanks for all the info!@@darrenmicklewright2008
@darrenmicklewright20088 ай бұрын
@@dnurdsx most kits come with everything they need to set up just make sure the sensor is 1/8 npt male thread to go straight in the hole but to be safe wrap abit of Teflon tape around the sensor first so there is no leaks
@bigmac72283 жыл бұрын
Erm yeah I ended up smashing the shit out the grille and ripping it out pmsl. I have the exact gauge and fixing plate. Glad you got extra hose as the one you get is pants. Nice work mate
@mastersmods3 жыл бұрын
Ha ha yeah that clear plastic hose is terrible! I can see how you would smash the grille, easily done. How did you find the facia plate and gauge?
@bigmac72283 жыл бұрын
@@mastersmods the needle on the gauge made a slight rattle noise which I found strange but ok now. And I just super glued the facia on as it wouldn't sit right. All In all its great for the price and the gauge tells the correct psi as I had a obd2 data app running and the boost levels matched 👍👍
@Greenaudiguy3 жыл бұрын
1k subs man💪🏻💪🏻keep going! Could easily follow what you done to install one👍🏻👍🏻
@mastersmods3 жыл бұрын
Cheers matey 👍🏼
@Yodaracing13 жыл бұрын
Nicely done buddy 👍🏻👍🏻
@mastersmods3 жыл бұрын
Cheers dude
@GTE993 жыл бұрын
Brill mate,gonna do mine soon 😉
@mastersmods3 жыл бұрын
Cheers, hope this helped you out with either inspiration or just as a rough guide 👍🏼
@jimyinam24642 жыл бұрын
Nice video mate I’m guna do this myself but the you should of showed the last bit to connect to light to the boost gauge how did you route the wire to the cigarette lighter
@mastersmods2 жыл бұрын
It's pretty easy and straightforward really. It comes down from behind the gauge to where the cover panel is below the steering wheel then over and behind the centre console and up to where you see it with the spade connection on. The negative wire can be earthed to anywhere on the body of the car
@michaelsealey6123 жыл бұрын
I wonder what the other video is?? Good video mate
@mastersmods3 жыл бұрын
🤔 Maybe we'll find out soon...
@shaynewilliams2594 Жыл бұрын
What holds the black guage besil in there u didnt show that
@mastersmods Жыл бұрын
Nothing really holds it there mate, it just stays there
@nubie11003 жыл бұрын
I have the same one.. I looked at the decent one but the prices are mad af
@mastersmods3 жыл бұрын
I've had a similar gauge twice and never had any problems so until I do I'll stay with the "cheap effort" as long as it works and shows correct boost pressure, what's it matter how expensive it was 😂
@daverolls85652 жыл бұрын
Hi, thank for the video: we're doing this on a Zafira VXR tomorrow so hope its fairly similar to the Astra. Did you block off the vent duct after you removed it? (Duct tape or similar?) thanks
@mastersmods2 жыл бұрын
No mate I didn't, I just left it open. I'd imagine it would be fairly similar to the astra, any issues message me 👍🏼
@bigdave60022 жыл бұрын
Top vid how do you hold the gauge surround in place
@mastersmods2 жыл бұрын
It holds itself there mate. At first it didn't seem like a very good fit but after a few hours it was fine, hasn't come out once
@christophertandy3591 Жыл бұрын
Looks good m8. Need to do mine wher would i connect the wires?
@mastersmods Жыл бұрын
There's a live under the centre console and you can ground it out on a chassis bolt
@alexUKguy Жыл бұрын
How are you supposed to keep the boost gauge surround in place - it just falls out
@mastersmods Жыл бұрын
I spoke to the people who made it and they said silicone 🤦♂️ lucky for me, mine doesn't fall out
@alexUKguy Жыл бұрын
@@mastersmods 😂 I think I'll try and find a more elegant solution
@mastersmods Жыл бұрын
@@alexUKguy I'm gonna be changing mine for the nevlock one so you can keep the vent. They're much better and clip in as well
@alexUKguy Жыл бұрын
@@mastersmods cheers, will have a look at them. Previous owner fitted this one
@vwcamper2065 Жыл бұрын
What did you use to keep the pod in
@mastersmods Жыл бұрын
Hopes and dreams 😂 it honestly just stays there's. Unless I move it, it's never popped out
@LukeLlewellyn-sq4wb5 ай бұрын
What did you use to earth it then?
@mastersmods5 ай бұрын
A bolt to the chassis mate
@marianak4727 Жыл бұрын
Hello! I installed my boost gauge how you said but i can get maximum 0.7 bar, on my op com with live data stream i have seen i get 1.8 bar, my engine is z20lel, do you knwo why i can t get more than 0.7 bar on The boost gauge? Thanks.
@anthonystoltz464611 ай бұрын
Mine also boost 0.7 to 0.8 in sport mode. 1.8 bar boost is quite high
@TheBobinn2 жыл бұрын
I found a pre installed boost gauge behind my vent on the vectra, it doesnt light up and doesnt seem to move the needle, vacuum hose seems to be correct, should it work without the power or might it be it requires power to work?
@mastersmods2 жыл бұрын
To my knowledge it should still work if plumbed in correctly, the power should only really illuminate the gauge. I might be wrong 🤷♂️
@RyannH2 жыл бұрын
I've noticed your clockwipe when you started the car, is it coded?
@mastersmods2 жыл бұрын
What do you mean coded, as in coded to do the sweep?
@RyannH2 жыл бұрын
@@mastersmods Yeah sorry, I'm aware that wasn't clear lol - Like on the VAG cars, they can be coded for the clocksweep etc, is that what you've had done here?
@mastersmods2 жыл бұрын
@@RyannH no mate the car gas done it since I picked it up last year. Thought it was just a thing they did
@chrisdavison63302 жыл бұрын
Do you have a link for the boost gauge? There's so many to pick from im confused now hahaha
@mastersmods2 жыл бұрын
The one I used is off ebay and this is the item number- 123645209089
@Yxnzy2 жыл бұрын
What did you do with the black negative wire?
@mastersmods2 жыл бұрын
Earth it to the body mate
@mastersmods2 жыл бұрын
There's plenty of earthing points underneatg, take your pick
@turbowarrior44ashg242 жыл бұрын
And the power just goes to the power on the cigarette lighter??
@charlotte96102 жыл бұрын
Do you have a link to the the T piece you bought?
@mastersmods2 жыл бұрын
Ebay item number - 251929885642
@charlotte96102 жыл бұрын
Thank you!
@LocalJunkRemoval21892 жыл бұрын
What size is that t piece
@mastersmods2 жыл бұрын
4mm
@damn_blu_ Жыл бұрын
What exhaust mods do you have in this video mate? I’ve just got a Astra vxr and I like how yours sounds