⭐ 1999 Nissan Altima - 2.4 - Knock Sensor

[@ginoluciano8994]

Wow I like the way you go about explaining everything, I need to do that to my 98 Nissan Altima and I watch your video and it was very helpful thank you very much brother may God bless you.

[@joseirizarry8256]

Thanks bro, very appreciative, I have to replace the Knock sensor on my Altima as well take care, blessings. Joey

[@ytmusic1509]

You really helped me, thanks.

[@OnlineAutoRepairVideos]

You're very welcome!

[@ehw1615e]

Great Video I have a 2000 Altima and I'm thinking to do it when I change the oil and remove the oil filter.. Doe this sensor sit on top of the oil filter? It looks like it . Plus it with the filter gone will it give more room for a 12 mm socket / ratchet?

[@mateoaguilar6049]

Please can you tell me where the harness is connected because in my car I can't find where it is

[@manuelg9358]

I replaced the knock sensor and im still getting the code ...why would this happen,do I need to drive it around or should it have came off automatically?? Someone help please!!

[@OnlineAutoRepairVideos]

You have to clear all codes once you replace it.

[@radmunkey]

Great video

[@UtubeAdviser]

I have been turning this bolt with a 12mm wrench counterclockwise for 3 hours now and nothing!. It won't turn at all!. I used PB Blaster and left it on a few minutes to penetrate and still nothing. It won"t turn. What should I do? How much would a mechanic charge me to remove and install the knock sensor?

[@SuperTave]

Raymond Siu having the same exact problem right now lol

[@regvibe835]

A shop told me about $600 today 5 1/2 hours labor they say🤦‍♂️.

[@SuchAstud666]

My car shakes while on drive as I'm stopped at a stop light, I put the scanner in and got the p0325 code, so I'm guessing it is the the knock sensor, my question is does a knock sensor also cause the car to stall sometimes? Sometimes when I take off and accelerate the car sputters and sometimes it stalls but not all the time

[@OnlineAutoRepairVideos]

Yes, especially on Nissan and Infiniti. Now I'm not saying that this is the cause of your car, but the knock sensor can cause those issues.

[@SuchAstud666]

Ok, I will definitely change it this week, also like you said, the knock sensor is cheaper to buy online, I found a hitachi brand knock sensor on Amazon for 47 bucks, at AutoZone it's 119, your videos are super helpful sir, I appreciate you putting them online

[@OnlineAutoRepairVideos]

Thanks, and that is a great price.

[@victorcordero1458]

@@OnlineAutoRepairVideos hey man i just bought a nissan altima. And i need to replace the knock sensor does this car have more then one knock sensor ..thank you

[@victorcordero1458]

@@SuchAstud666 hey how did it turn out..

[@christopherarendall5973]

Man would you come change my knock sensor lol appreciate the video I'm gonna try it

[@OnlineAutoRepairVideos]

LOL!

[@johnsampson1096]

Good job, sir! I have a 2000 that needs a knock sensor, this is helpful, I may attempt to do it myself. I'll bet the Nissan dealers have a special tool or device to make it a 5 minute job. Then they slap a three or four hundred dollar bill to do it. LOL

[@OnlineAutoRepairVideos]

LOL, they probably do!!

[@darwindropmazda]

Good job my brother!

[@OnlineAutoRepairVideos]

Thanks Darwin

[@daffodill7082]

Do you have any information on a throttle body sensor for 99 nissan altima gxe 2.4l 5-speed manual engine

[@OnlineAutoRepairVideos]

Sorry, not at this time.

[@daffodill7082]

@@OnlineAutoRepairVideos okay thank you

[@jaysal5712]

hey how much you charge to change one out .. im from wilson nc

[@OnlineAutoRepairVideos]

What is the year, make, model and engine size of your vehicle?

[@terrencesennie2407]

Sounds like you can see it but it's a feel job though

[@regvibe835]

So underneath is the only way to go then right?

[@OnlineAutoRepairVideos]

It's the best way, unless you plan on removing the intake, or you're a contortionist, LOL!

[@joshsanders2248]

Every video I've watched on this the bolt comes right out, I've been trying for 5 hours just trying to crack it and i get nothing

[@pancratius8886]

try PB blaster or WD 40, prefferably PB blaster, should help break it loose

[@Antwon20100]

nice work man I have the same car a 99 Nissan Altima gle just a silver color I gotta have mines put in to

[@OnlineAutoRepairVideos]

Thank you, let us know how the job went for you when you do it.

[@Antwon20100]

+⭐ Astral Auto Repairs you're welcome and well I'm actually going to have professionals put it in cause I have not just the P0325 knock sensor code but a p0300 code to so I'm a let them look at all of that.

[@christianalberto235]

Would the knock sensor stop the car from starting? I have a 1998 Altima and I’ve felt the relay and it ticks when turned over, but the plugs have no spark. Can’t figure it out.

[@OnlineAutoRepairVideos]

It will cause it to run really bad, and yes, sometimes not start. Check your distributor first though.

[@JoseRodriguez-rv5nz]

Great video brother thanks

[@OnlineAutoRepairVideos]

Thanks!!

[@daffodill7082]

@astral auto repairs do you have a video on replacing a clutch on a 1999 Nissan altima gxe & what are the sensor connector & pigtails called?haven a hard time find out the name of them as I need to replace one and auto store isn't able to find it

[@OnlineAutoRepairVideos]

Sorry, we don't have one yet. Sometimes the local auto parts store don't carry the pigtails. You could try a junk yard.

[@daffodill7082]

@@OnlineAutoRepairVideos my husband changed our clutch recently and not to sure what the name of the connector or pigtails called would you by chance know the correct name?

[@OnlineAutoRepairVideos]

@@daffodill7082 If you can let us know the color of the wires at each connector, we can try to figure it out.

[@daffodill7082]

@@OnlineAutoRepairVideos the colors are red/white & orange

[@OnlineAutoRepairVideos]

@@daffodill7082 Is the vehicle the same year, make, and model as the one in the video?

[@mike16179]

I have a knock senser code and misfire code i put new dist. And sparkplug wires and plugs could the knock sensor cause misfire

[@OnlineAutoRepairVideos]

A bad knock sensor may cause a P0300, but NOT a specific misfire code, like a P0304. What code are you getting?

[@jassboona8040]

Is it the same for an 1997 Nissan altima

[@OnlineAutoRepairVideos]

Not sure, if the part is the same it could be similar

[@israelavila2558]

I liked your video i watch it and could change it to my honda odyssey thank you

[@OnlineAutoRepairVideos]

Thanks Israel, glad we could help

[@ManicMechanic007]

I may have missed it, but I believe this was a "gnat free" repair. LOL! Tight access for sure.

[@OnlineAutoRepairVideos]

Lol, yes it was, I guess the gnats said he's having a hard enough time, let's just sit back and watch.

[@Alientraveler003]

Nice job

[@OnlineAutoRepairVideos]

THANKS!

[@donaldgarrow1073]

the maxima the knock senor is in a harder place try that one !

[@OnlineAutoRepairVideos]

OH we know!

[@brianobrian6637]

Why did they put the P.C.V. where they did !

[@robswrenches9501]

Well done Timmy.

[@OnlineAutoRepairVideos]

Thanks

[@FreshKicks4545]

What was the reason to change this and symptoms besides check engine light

[@OnlineAutoRepairVideos]

They had a check engine light on.

[@markvirts5883]

I did mine. I had to use an retractable magnate to start the bolt. While only getting 2 fingers to turn the bolt. It was a nightmare. I will not do it again.

[@OnlineAutoRepairVideos]

LOL Mark, that's a great idea, too bad I can't say I will not do them again.

[@NoneMechanic101]

Nice!

[@gerardos5399]

God bless u bra

[@OnlineAutoRepairVideos]

Appreciate that!

[@papi-champoo6033]

Try the starter on that 😂 you'll probably hate life, lol.

[@OnlineAutoRepairVideos]

We did a 2003, is that the same: kzbin.info/www/bejne/lWLTdXRrabGrfKc

[@dougdileo4727]

could not get the bolt to even budge,,gave up after 11/2 hours...no room for leverage,,who the heck designs crap like that...smh

[@OnlineAutoRepairVideos]

I agree with you 100%!!!!

[@Lee-dn3ou]

I had one come in my shop tried for several hr likely need to remove intake manifold

[@mateoaguilar6049]

help

[@alexjackson936]

Thanks for the vid bro. I assumed I would have to remove the manifolds like I had to on my g20 p11. Thankfully I didn’t have to. Only things I did different, A, I recommend a ratcheting box wrench, saves some time. And B, I used car ramps instead of jacks. Good vid though.

[@OnlineAutoRepairVideos]

Thanks Sean, and those are some good suggestions!!!

[@benrp6116]

Rockauto got the knock sensor for $8.79

[@OnlineAutoRepairVideos]

That place is going to put a lot of parts stores out of business!

[@gerardos5399]

I love u

[@tgoodm1]

Couldn't make out much underneath. Too dark. You should get an Astro light.

[@OnlineAutoRepairVideos]

I know, I hate doing videos in tight places like that, maybe I should get a mini camera to fit in there as well.