Astro Tools 78318 Extra-Long Flex Head Nano Socket Wrench for Astro Husky Ares Nano Impact Sockets

www.astrotools...
www.astrotools...
amzn.to/46mWExU - Astro Tools 78314 14-Piece 3/8" Drive Low Profile Nano Impact Sockets - Metric
amzn.to/4fhsCjc - Astro Tools 78310 10-Piece 3/8" Drive Low Profile Nano Impact Sockets - SAE
amzn.to/4bTTp28 - Astro Tools 78313 13pc 1/4" & 3/8" Drive External Torx Nano Impact Socket Set, Black
amzn.to/3WlKjFr - Astro Pneumatic Tool 94410T 10-Piece 3/8" Drive Nano Impact Torx Bit Sockets
amzn.to/3SoMbMN - Astro Tools 94411M 11-Piece 3/8" Drive Nano Impact Metric Hex Bit Sockets
amzn.to/3WlJfBr - Astro Tools 78318 Long Flex Head Nano Socket Ratchet Wrench, Extra Large, Grey & 11Pc 1/2" Drive Low Profile Nano Impact Sockets - SAE (model: 78211)
Sorry, I know it's probably showing out of stock on most of those links, but be patient, it's out there. And when they restock, they go quickly.
Just a quick unboxing and review video of the Astro Tools 78318 Extra-Long Flex Head Nano Socket Wrench. This is a really great addition to use with the Astro Pneumatic Impact Nano Sockets. It will work with other brands as well as long as they have the small cutout notches for the 'C' - Clip style of detent in the wrench. The wrench seems to be very sturdy and well made. I have no complaints at all. I just wish that it was more available...
I couldn't find the link on amazon where I just bought it, but just try searching under the 78318 part number and hopefully it'll turn up again soon.
Best of luck to you.
Specs from the description:
Item # 78318
Extra-Long Flex Head Nano Socket Ratchet Wrench
• Designed to work with and retain Astro Nano style stubby impact sockets for a full working height of just 0.88”
• Extra long 18” length for accessing tough to reach hardware, keeping your hands free
• Complete 6mm to 24mm coverage with one tool by pairing with Astro 78319 6-24mm no skip set
• 100-tooth ratcheting mechanism, polished tear drop handle, c-clip design to retain 3/8 drive size Nano style sockets with 17mm outside hex
Thanks for Watching!
Please Subscribe!
www.danthefixitman.org
www.amazon.com/shop/danthefixitman
Song used in the video:
'Orange Smile' by Saidbysed
I did just notice that there's another one from Duratech that just showed up, but I don't know if it's the exact same, or if it's made by someone else etc..
Here's a link to that if you're interested:
amzn.to/4c55W2B - DURATECH Extra Long Flex Head Nano Socket Ratchet Wrench, 144-P, Double-Stacked Pawls, CR-V Steel, Compatible with 3/8" Drive Nano Sockets
Looks like the initial reviews are ok, but some are complaining that the head is sloppy. Maybe some threadlocker would help tighten that up a bit?
This video is intended for entertainment and informational purposes only. Any repairs you make are your responsibility. I am not liable for any damages to you or your vehicle or your property.
As an Amazon Associate I earn from qualifying purchases.
All other links are affiliate as well meaning that I earn a small commission if you make a purchase

[@ASEmastermechanic]

Just a quick update with Astro Tools 78318. I called the company they are out of stock. They will get some more either the end of November/December and you can pre-order thru Summitt. At this time, they are also coming out with a 1/2 inch version of this ratchet. Spoke to company on 08-20-2024.

[@WesleyDropDead]

I’ve had that 6-24 set along with the handle for a little over a year now and although I don’t use it every day there have definitely been some jobs that this combination worked perfect on. I have the icon/mountain wrenches as well as the full set of those Tone RMA wrenches also but that extra depth of the Astro has been the only thing that would fit fully over the fastener in certain situations. Definitely worth having!!

[@WhyFearLove]

You should be a salesman for Astro!! Bought from Jersey Discount Tool directly after watching your video. Thank you!

[@DantheFixitMan]

Thank you! I am sure you'll love it. Take care, -Dan

[@bh10k17]

Astro has a 11mm that's 10 inches long ( I think ) coming out September. For the 1/4 sizes. JDTCO is taking pre-orders.

[@jeremypeiffer6026]

I waited a couple months for this ratchet thought it was gonna be the best thing around used 3 times and broke trying to loosen rusty caliper bolts not the bracket that actual caliper. I figured it would be more durable but nope now I hope I can find my receipt to warranty it. Nice tool just watch the torque you put on it. Don’t have near the strength as the mountian, Carlyle, icon wrenches.

[@DantheFixitMan]

@@jeremypeiffer6026 Maybe since it’s longer than those other brands of ratcheting wrenches, I guess it would be easier to overdo it on the torque. Thanks for the heads up, I will be careful when using it to not get too carried away with it. Take care, -Dan

[@AstroTools]

A benefit of lifetime warranty is we're always working on improving. We've somewhat recently changed the pin bolt style and got a +25% torque increase, so those who do manage to break it will get the latest version forever.

[@DantheFixitMan]

@@AstroTools That’s great news! Thank you so much for letting us all know! I’m very excited to start using it!

[@ToxicityAssured]

@@AstroTools Why does your website say... "Astro Pneumatic Tool Co. warrants our products to the original user against defective material or workmanship for a period of 1 year from the date of first use." Which is it, 1 year or lifetime?

[@tdotw77]

​@@AstroTools So cool you're out here responding to a random comment about your tools, and how you keep improving them! Now that's some customer service right there! 👍🏻👌🏻🛠️🔧🔩💯 ✊🏻🇺🇸🦅🇺🇸✊🏻

[@bensongt3matthew401]

I should be getting my extra long wrench for my nano sockets next week. I'm excited. Although I think the ratchet wrenched will still shine when it comes to using them on nuts with an amount of bolt going through, more of a pass thru design with a traditional ratchet wrench. But I'm very excited none the less.

[@F85M]

The price is actually decent. Waiting for the 19-Piece set to become available.

[@Fedwrench]

I think the new 10.5 inch version of the Nano Socket Ratcheting wrench handle is much more useful than the longer version.

[@DantheFixitMan]

Just ordered it last week.

[@HectorGarcia-ww5do]

I have the set & I love it with new cars & truck not giving a lot of room to work it's nice & convenient

[@stevewoloszyk4666]

The smaller sockets may work as pass thru, but anything 17mm and above would not allow the thread to fit through. A 17mm bolt has a 10mm thread which is larger than 3/8”. That being said, I’m a big fan of these sockets. I have the 1/2” drive set as 😮well with both drive wrenches.

[@DantheFixitMan]

@@stevewoloszyk4666 Yes, that’s a good point,…I thought about mentioning that in the video, and I guess it slipped my mind, but glad you pointed that out. Take care, -Dan

[@BA-pz3lo]

i just got mine too. i like it. havent used it yet though 😅 i cant wait for my car to break down again 😂

[@otowncolby]

Been a few comments on it here, but here's another vote for making a 1/2 version. You can only make the 3/8 version work as a pass through up to about 15/16mm.

[@timtimtimmay4654]

This is an awesome Christmas or birthday gift for mechanics.

[@promodmerc]

Summit Racing has the Nano Ratchet. I just ordered it and the 14 pc metric Nano socket set. The ratchet was a little over $28 and the sockets were just under $36. The 19pc set was $63 and was at least a month out. For almost double the cost for 5 more sockets I decided I didn't need the 20MM-24MM sockets.

[@ASEmastermechanic]

Just an observation, Summit Racing says you have to wait a long time for it to ship out. Today is 8/20, they will NOT ship out until September 16, Also the ratchet you describe is part # 783105 THAT IS only 10.5 inches long, the one in the video part # 78318 is 18 inches long, big difference. I AM NOT WAITING 29 DAYS ON LY TO GET AN EMAIL SAYING YOUR TOOLS WERE SHIPPED OUT TODAY. THAN YOU WAIT ABOUT 4 OR 5 DAYS. I can get tools from Japan and China faster!!!

[@promodmerc]

@@ASEmastermechanic I ordered the 18" ratchet. It is $28.79 on Summit with over 10 in stock. I don't know how you assumed I was talking about the 10.5" long ratchet .

[@james10739]

Ya I have been planing on ordering the set with the wrench for a little bit the only thing it needs is also a short or possible stubby wrench

[@kalybnielsen4183]

I bought a few Titan pass thru sets about 22 years ago, still work great, the Cornwell sets are clones of that set, I have a few sets of the Craftsman Maxx Axxess which the GearWrench copied, all great sets, there are definitely times the pass thru design works out extremely well

[@KnKn-rr9ri]

This set plus gearwrench passthrough ratchet perfect combo.

[@nickwagner2284]

Do these sockets work on the Gearwrench? Any reason you think it’s better than the Astro one here?

[@KnKn-rr9ri]

Yes these do. The gearwrench passthrough ratchet is about 12 inches and astro ratchet is around 18 inches.

[@SupposedlyShiny]

@@KnKn-rr9rithe gearwrench have a totally different setup?

[@aCiD0L2]

Do they lock in the gearwrench ratchet too?

[@KnKn-rr9ri]

They hold but not as tight. Works for me. The astro wrench is too long for most jobs. The gearwrench has a locking fix head.

[@OneManOnFire]

Owning 1/4, 3/8, and 1/2 version with the rachet attachment has changed my game

[@brentg8600]

They have a 1/4 inch version? I couldn't find it?

[@OneManOnFire]

@@brentg8600 I got on Amazon it just recently came out

[@markm0000]

@@brentg8600the 1/4 size is essentially a 11mm ratcheting wrench.

[@danielt.147]

I wish astro would make the half-inch/22mm ratchet with the retainer for the 1/2 nano sockets.

[@DantheFixitMan]

@@danielt.147 I am pretty sure I read somewhere that they mentioned that they are working on that…

[@AstroTools]

This. And then more 1/2" size range as well.

[@richb2229]

I have the 6 to 24 Astro and the wrench. I wouldn’t recommend using the wrench in high Torque applications, it’s a bit weak.

[@NateASE]

Now they need to make one for the 1/2” nano sockets

[@DantheFixitMan]

@@NateASE Yes, they are working on it.

[@ZomBeatBrainZ]

Would be nice to see a no skips SAE no skips

[@ocean374]

That’s pretty cool thanks for sharing

[@warrenblanchard889]

Love mine also have the 1/4” sockets waiting on my wrench to come in Jersey discount tools has great prices on them and bundles

[@seamasrigh2162]

I understood that Astro had discontinued the wrench production. A true tragedy Duratech makes one for $30 but I found my Astro on ebay at $50. Wish Astro would sell the sockets individually.

[@prevost8686]

The warranty replacement rate has to be very high based upon the design. Regardless of who makes one they’re going to get busted constantly.

[@kanyeeastlolz]

Harbor freight has one like this. Is this one a better value?😊

[@matthewpeterson3329]

As of 7/30/24 @ 0754 hours, neither set is available on Amazon. Let's hope they are ready to go soon.

[@Jeff-rk8hq]

I don’t know what they’re talking about exclusive, Duratech owned by hangzhou great star (owns sk shop vac pony jorgensen) they sell nearly the same wrench

[@Jeff-rk8hq]

Look at that duratech tell me it’s not the same? Same palm swell same no Direction, switch, lever witches The first thing that wrench needs except strengthening the forks

[@Jeff-rk8hq]

I’m not trying to be a dick. I don’t think you have any intention of misinforming us. Just wanted you to know I purchased that same Duratek Ranch off Amazon and it was such garbage. I returned it I think 30 bucks I haven’t laid hands on the Astro but from what I can tell, they’re identical. And there is a weird connection between great StarTools who now owns SKSK used to sell the turbo sockets and now all the sudden Aries tools is selling this turbo sockets and they’re made in the USA either they bought old stock from turbo socket or SK or great star owns them as well but the ares site claims they’re based out of Kent, Washington with a photo of their team who all look American (if that’s a thing) lol but if it is a subsidiary of hangzhou great star it just seems to me they’re trying to aim at an American market that wants US made tools with the leftover sk stuff

[@DantheFixitMan]

@@Jeff-rk8hq no worries at all, I did see that one as well after making this video, but I haven’t had my hands on it or heard much about it. Thanks for sharing the info and feedback on here. Take care

[@paulmendenhall5226]

I have one do you no if they make one for the 1/2 in drive socket s that take a 22 mm

[@jalton9416]

Does astro make a ratchet for the 1/2 nano sockets?

[@JCS1069]

Is the 19 pc set not available yet? Don’t see it on the website. Thanks

[@rhobbymonsod8524]

I am still waiting for my 19 pcs Nano socket on OCT.😔

[@leighgrinager9581]

Has anyone used this with 12 point sockets for driveline bolts?

[@rodneybugher9312]

No reverse, still? Come on Astro!

[@johnjohnson7128]

DURATECH Extra Long Flex Head Nano Socket Ratchet Wrench

[@remogaggi82]

Would this be good to handle the 14mm bolt the back of the intake manifold on 1mz-fe engines?

[@DantheFixitMan]

@@remogaggi82I know that bolt very well… I do think this would work, but the handle might be a little thick for that small bit of clearance between the firewall area. Depends on whether it’s an avalon or RX300 etc…Using a flat profile ratcheting wrench with an offset like the mountain or TONE might be a little better. Best of luck to you. -Dan

[@remogaggi82]

@@DantheFixitMan rx300. I’ve taken it off before using a harbor freight pass through socket wrench but that thing is still pretty thick and I think I rounded off the bolt slightly taking it off. I’ll look into the tone!

[@CorvetteTrev]

No reverse on that ratchet, you'd be better off in a reversible with a socket rail popped in the back, no wear on that ring. I can't believe you have to pull the socket out to go in another direction

[@atikovi1]

If only the flex head was locking, then it would be perfect.

[@cybergrindin]

Milwaukee INSIDER *drops mic

[@wim0104]

Insider is way too bulky

[@DieselDog1982]

From what I’ve heard and seen, these aren’t very durable. The ratchet swivel head is the weak point. It’s almost like you need a regular ratchet and socket set up to break the fastener loose, then use this nano socket to finish the job? You’re already there remember 😂

[@keysautorepair6038]

The sockets are not that great the ratchets are cheap junk just because they give you something for free don’t make it good.

[@NunYa953]

Pipe down from the cheap seats.

[@keysautorepair6038]

@@NunYa953 Truth hurts?