ASUS ROG Ally Hall Effect Joysticks Installation & Review!

[@Daogchannel1]

my left stick was going only up and down and I did not want to bother with an RMA. This was super easy to do, thank you!

[@ChrisMizo]

Glad it helped!

[@auxxs]

Fr same here bro

[@jheisz19]

Jesus same here. Wtf Asus

[@CaexarHosutaga]

same

[@JPziiinho]

Same here

[@SithHappens9567]

Took my Rog apart twice now and fixed the analog stick thanks to your video. Second time was only because the first time I didn’t tighten the screws down tight enough on the left stick so it was super jittery and it was so annoying, can’t believe it took me this long to fix it. Thanks again 🤙🏻

[@GreenLeefMusic]

A thank you for saving me time, hassle, and probably money as well 🙏🏻

[@ChrisMizo]

No problem at all! I appreciate your support and feel free to reach me at anytime ✌️

[@2011jaydog]

Awsome video, I had to replace my display cable, accessories asus outta France, was only 3 days ,was 7$ cable and 25$ shipping to u.s. , yeah ordered on a sat and Monday they notified they sent it, and that Wednesday, 2 days later I had it and ally was back up and running, can't say I've had any proba with mine, good unit, no sd card issues, tend to play at 720p and try to keep temps 80 or below , already modded and git a 2tb 980pro 2280 drive under my battery , fits fine, got a 4tb silicon power on the way , clone it and add more games, got like 77 games tween 3tb :) can't wait to add more :)

[@ChrisMizo]

That's awesome! Glad you're enjoying Rog Ally as much as I am 🎮

[@MisterNutty]

Seems like a no-brainer to just use a HE sensor on the right and keep the original sensor for the eventual replacement of the left stick. The price sucks but my right stick has an issue that requires me to open it up anyway, so maybe I'll give this mod a go. Thanks for the install video. I'll need this later.

[@user-vl4ex5dr6o]

Nice video mate good format keep more coming

[@ChrisMizo]

def will, thank you!

[@TheSoonToBeTrucker]

​@@ChrisMizoufixit lol

[@ChakritCharoenpattananont]

Thanks , my first Ally's right stick died after only 3 days. It's good to know that it's easy to replace.

[@ChrisMizo]

Luckily it is that easy 👌

[@irvsmadhouse]

Did you calibrate the joysticks before testing them. There is a calibration menu it even helps the stock joysticks

[@ChrisMizo]

Yes I have, personally I think it’s best to leave stock joystick on the left and to change out to a HE joystick on the right.

[@cS-jr8du]

Interesting. I saw another video where they installed it with other stuff for magnetic interference too. This looks a bit better though

[@pyroyuy]

Yeah, aluminum tape and a magnet so that way you don't have to put in dead zone.

[@GreenLeefMusic]

Thank you for this video and for covering the entire process here. I likwly won't go the hall effect joystick route but am looking to swap out my OEM joystick for an OEM replacement joystick. My left thumbstick is still working fine as far as the accuracy but is starting to make some slight grinding-like noises when moving it around now, so i would like to replace it very soon. My Ally also has a very tiny crack in the white casing on the bottom and after seeing the latest GN video on their warranty repair process ive decided against aending it to them even tho ive also had a non working sd card slot for several months. I just use a usb-c micro sd reader and a 2TB SSD is installed anyway.

[@LokusTV]

Do u have a link for a joysticks themselfs? Like the black caps that u said came in to small 9:26

[@captainchaosfpv5188]

Are the stick any stiffer? The stock are sloppy as hell

[@ChrisMizo]

about a 5% difference, notable on accuracy

[@2kcheetah]

Shielding helps a massive amount. Not installing anything is pretty silly

[@mrsipp08]

I'm wondering if I use the same metal that the analog joystick caps that's on a Xbox white controller.... I wonder would that help alot of the interferences or the antenna is causing it. Sounds like I may have to swap what's in there if that happens. I'll wait till someone figure that out

[@bishalscreation]

Strange that they made exactly same size 😮

[@ChrisMizo]

Close, just the joystick covers are shorter.

[@bishalscreation]

@@ChrisMizo thats strange

[@amirhosseinmohammadian6276]

Do you recommend to play games with xbox controler always as primary controler? because Rog ally sticks are so soft(loose)not as hard (strengthen) as xbox controler, and I think they do not have adequate quality to play action games like CoD permanently

[@ChrisMizo]

The hall effect joystick does help a ton, I do think it is much more comfortable gaming on a controller. Although it may be unrealistic to game with your controller everywhere you go. I don't think you want to stop by a cafe and whip out your controller.

[@amirhosseinmohammadian6276]

@@ChrisMizo thank you so much for your respond

[@billyblanco6700]

Are the sticks any stiffer than the original? I don’t like the original sticks they have too much play for fps

[@ChrisMizo]

not really, still a bit wobbly but more stable

[@kewlztertc5386]

You only need to push down on the unremovable screw (what you called the "ground screw") to open the case. All Asus products work like this. No guitar pick required.

[@bishalscreation]

Even del g15 laptop

[@BstizzyBelieves]

I didn't remove it from the notch. I have to attach it back to the unit but how do you click it back in place.

[@sup2320]

Do these joysticks make that much of a difference?

[@ChrisMizo]

absolutely they do

[@adriannunoperera242]

What happen if i forget to disconnect the battery and change the sticks?

[@xRevoEmaGx]

The link for this vid is the wrong thumbnail, it's for a completely different KZbinrs channel ..

[@ZVManning]

That is kinda a cool thing to do but yeah it is expensive to just get 1. Might be fun for Call of duty but realistically it's a non issue either way.

[@alexcross8914]

I dropped my ROG and after that the right stick began to move strongly to the right, i.e. the cursor is always on the right side. I disassembled ROG and ran into exactly the problem mentioned at 10:12, but the stick works the same way just like before i thought i disconnected it. so I think maybe this little thing came loose already when it fell and that’s why it’s buggy? if so, I’ll try to put it there again, but it's kinda tricky..

[@ChrisMizo]

That could be the case, ribbon cables can be tricky and may seem that the connection is held especially when clipping on. Once you take it apart, to make sure the cable is in you’ll want to give it a light tug to confirm that the ribbon cable is secured. I hope this helps!

[@SithHappens9567]

Replaced the left stick on my ally because it wasn’t working left & right but when I did yes it works and all but it feels super loose and it’s all clickity from it being loose and it’s so annoying.

[@ChrisMizo]

If it's super loose the stick can be faulty, I'd swap them with different ones.

[@SithHappens9567]

@@ChrisMizo yeah I plan to I bought extras just in case something like this happened. It’s odd tho it works perfectly fine and it looked good when I first installed it but oh well I’m gonna swap it out.

[@mateuszwol3184]

Do you think an Xbox thumbstick would fit on oryginal joystick ?

[@ChrisMizo]

Unfortunately Xbox thumbstick will not work with the Asus Rog ally.

[@steffdia7080]

Does it have clicking noises like the official Asus Rog Ally joysticks?

[@ChrisMizo]

yes

[@luisolvera6266]

Which part number did you use?

[@ChrisMizo]

Onexplayer1

[@luisolvera6266]

​@@ChrisMizoX1 or 1/1S?

[@배상범-d7s]

I did a circularity test on my stock sticks and it draws square rather than a circle. Do you know how to fix that or is it normal the stock ones draw square?

[@ChrisMizo]

Try a different stick set as some are flawed from my experience

[@pablomaio2920]

The ribbon cable on the 2nd controller came off, there was no damage am I cooked

[@ChrisMizo]

Off the new or old joystick? If it’s the new joystick return it and get a replacement, if it’s the old joystick, it won’t really matter and if it does you can order the old joystick for backup.

[@Scardrewpro]

Bro i did everything correctly and now it womt turn on, can i buy a replacement wire for the battery?

[@AztroGezzy]

Connect the ally to power source and turn it on

[@rodneyjust1833]

Dead link to the joysticks....any idea where you can get them?

[@ChrisMizo]

onexplayerstore.com/products/joystick?variant=47017705537830 Sorry about that. They changed it up, here’s the new link.

[@luisolvera6266]

​@ChrisMizo so the onex player mini 1195G7/5800u is the correct one that is needed for rog all replacement?

[@jorgemoreira2406]

They dont fix everthing kk the owners have to do all alone like me ❤❤

[@chrisboucher2813]

The link for the hall effect joystick says page 404 not found, do you know what model of one x player these are from?

[@ChrisMizo]

onexplayerstore.com/products/joystick?variant=47725790691622

[@ChrisMizo]

Crazy I just updated this link not that long ago haha

[@iROZAY]

Hey anyone knows where I can buy the shielding tape for the hall effect because mind didn't ship with one?

[@MajinX]

Dissect?? Drain the battery? Oh god -walks out-

[@yummiermussel5331]

Yeah my ally left stick is being worn down by the light ring

[@ChrisMizo]

i recommend getting joystick protectors, that'll prevent anymore wear on the rgb rings.

[@yosefmatayev4308]

My rog ally right joystick had stick drift

[@plaistowjames6792]

Why?

[@NoonMight]

Why does it matter to unplug your batter when it’s at 15% vs 100%?

[@ChrisMizo]

it's a recommended precaution for electrical discharge

[@Rex-Se7en]

It doesn’t. Use a grounding/anti static wrist strap.

[@2kcheetah]

Wheres the RF shielding for the left stick??

[@ChrisMizo]

rf shielding won't do much for the left stick, it's more of the magnet interference with the left trigger and left stick.

[@Gtx1990]

So may I ask do we need the anything else to prevent the magnetic disruption on the left stick?

[@kewlztertc5386]

Mine came with "shelding paper" to prevent interference

[@mondyn5870]

Does it fix dead zone ?

[@ChrisMizo]

absolutely

[@fairplayer916]

Question: are the plastic thumb caps, the part your thumb actually touches, a proprietary shape? I'd like to swap them out for some aluminum Xbox One Style caps if I could. Aluminum doesn't wear out the way plastic does

[@ChrisMizo]

elite joystick caps will not fit, the standard series s/x controller joysticks will.

[@fairplayer916]

@@ChrisMizo that's perfect. Would be a great add on to go with the hall effect stick modules.

[@mistlunatic]

👏👏👏👏👏👏👏👏👏👏👏👏👏👏

[@yosefmatayev4308]

Lol I got stick drift after playing over 100 hours of cod

[@demonportable]

life span done in 100 hours :D