Asus TP412F No Display - LFC

[@gametec_live]

33:00 you monster! XD (love your videos btw, very informative and entertaining)

[@peteunwin9663]

The mat looks great and colour helps the camera. Nice one Graham.

[@Seansmit23]

I actually did think he was going to leave us hanging and I did for a second think that you were in fact a monster. 😂

[@MS-pk2se]

it's fun how people are focused on peel nowdays.. :D i don't give a toss. it's just protection and one more one-use plastich we throw away..

[@ZMEK1]

Adam your one of the most underrated KZbin creator in terms of repairs. It's so enjoyable watching you fix the products at the end!

[@JohnDwyer123]

I agree!!!

[@TLM-Nathan]

I can't be the only one that would like a 2 hour red herring search video. It's those deviations and mistakes that teach the most Thanks for continually taking the time to record and edit these videos. I appreciate them a lot. ❤️

[@vgamesx1]

It's nice sometimes, but in this case it appears that it was simply a lack of testing the simplest things first, he noticed the computer turn on then didn't go straight into plugging a display in to confirm, I mean, I don't see how you could waste 2 hours on this otherwise. It's very easy to overthink what the problem can be.

[@transformateur9969]

Thank you so much ! Always a pleasure to be with you!

[@Tyceyy]

At this point that intro music is classic and the most relaxing thing ever:>

[@nticompass]

Love the peel of the film at the end, that was perfect

[@hea5843]

Thank you! Always love your videos. Mat looks great.

[@sleepwalker6825]

The brightness is Fine Graham ... It does look more balanced ( Picture Wise ) Cheers for Vid

[@NebukadV]

Good job! Would have liked to see some autopsy on the old screen. Would be interesting to see, if there was something wrong with the backlight driver on the controller board or if the LEDs them self have gone bad over time.

[@DumahBrazorf]

Maybe just a shorted cap on the booster circuit...

[@sergiobarros6102]

Good content for the podcast!

[@frankbumstead3838]

The screen on my Samsung SM-T970 is showing a perfect picture. Yes a move to a "One Colour Mat" would get rid of the disruptive screen effect.

[@coctailrob]

The iMac screen removal wheels are good for this sort of thing. They don't distort when heat is applied any you can drip isopropyl alcohol on the wheel which wicks into the gap to loosen the adhesive further

[@willbarger2233]

New matt looks fine. Thanks for another interesting video

[@stefan330911]

Great Job!!! Makes much fun to watch your videos. Keep on filming.

[@tinman9341]

I’ve done similar repair attempts using a rice bag. Basically just fashion a long piece of fabric or even an old sock and fill it with rice. Tie the end somehow. Then just heat in the microwave for about a minute or so and you have a heating pad. It also works good when you have muscle aches.

[@MS-pk2se]

fully agree with the grey color you pointed out.. i like it a bit darker.. ;)

[@abrahamalviarez5870]

the new mat is nice!

[@josearrasola7236]

Hello sir , I’m from Miami Florida and I have been following you for about a 2 years and I love your content and I try so hard to never miss a video ? Also love the fact that from what I see in your post is that almost nothing scares you and you go all in ? Thank you 🙏 and please keep up the great work ?

[@Gersberms]

Very nice desk mat, it looks great.

[@petartomic6570]

Very nice man. Nice and simple repair, all went good and clean.

[@telquad1953]

Fine peel. Worth the price of admission.

[@vgamesx1]

27:30 Depends on the device, on my old xperia phone I tried several cheap pre-cut adhesive strips and a more expensive one, all of them came off, the more expensive one lasted much longer, but the screen would not stay on until I used some b7000 which still hasn't come off.

[@somewaresim]

Very smart job Graham.

[@Kolor-Kode]

I was about to comment about the partial peel ... glad I waited :D :D

[@millzee60]

Love your work :)

[@caylasmirawooding2251]

The Mat was a good choice.. Looks nice

[@tobyerixon8827]

Good job Adam !!! Very professional !!! I enjoy your videos very much, and your new deskmat works great. Thank you for sharing your knowledge. 😃 And i like the teaser with the protective film. 🤣 Keep it up. 👍

[@daviestewart2510]

Could I suggest you rename this part of your channel "Let's Fix Laptops" :) I can't remember the last time I saw a desktop on the channel, I'm not complaining, your content is excellent, keep up the great work and thank you for sharing

[@GregM]

The mat is fine the way it is. Some laptops use the quick release pull strips to free the panel from the frame but as we know those do not always work all the time.

[@DanielsGameVault]

I think disconnecting the internal display connector doesn't necessarily force the graphics chip to output to the VGA/HDMI ports - it probably depends on the interface: if it's a dumb LVDS cable, I doubt the chip even knows there's a display there or not - it just outputs to that connector anyway, even if a display panel "listens" or not. It probably shows up in dev manager as "standard PnP monitor" or something similar, even if the panel is not there. If it's a DisplayPort (eDP ??), then yes - it might actually know if it's physically there or not and default to the external output...

[@Adamant_IT]

Modern laptops are eDP, or Embedded Display port, so there is communication and hot-plug detection between the display and motherboard. I'm not sure if all laptops actually implement the detection, but theoretically at least it should make a difference. If nothing else, it reduces the chance of Black Screen - where the laptop _is_ outputting to HDMI, but because it's treating the built-in display as primary, you don't actually get a picture at the login screen, making it hard to tell if you have any output or if windows is punking you.

[@rraygen]

NB: Remember to FULLY test the touchscreen other than the display before gluing it down! I didn't get lucky one time, and it was a nightmare to dismantle all the work I've just done

[@tarakoury4386]

Which part of the screen is managed by the touchscreen? I dropped mine and the touchscreen doesn't work anymore. I'd like to dissemble but not sure which part I'm looking to fix.

[@ToTheGAMES]

Brightness is perfectly in order now.

[@Mikie1959]

The Brightness is perfect for me not to bright not not bright enough just perfect.

[@bellshooter]

Looks visually good to me, and the pattern is a good contrast.

[@paolo11x11]

Great repair - always edge of the seat viewing when displays are being pried apart. My two cents on the mat repair surface : a single colour would make it easier to find errant screws or tiny parts. Anyway, another great vid.

[@andrewmcfarland57]

yes on the solid mid-tone mat. Also, might move softboxes so they don't reflect in the gloss screens when laid flat on bench.

[@shooter3267]

Brilliant repair!

[@johng.]

The new mat looks good! Stay with something lighter, if you do change it. Keep up the great work!

[@coltronex]

Your mat is perfect!

[@Kelekona_808]

New mat meta looking sharp. It also goes nicely with what I assume is a keycron keyboard

[@whodatdere1]

Next time you have to try a clean removal like this. LCD removal wire (Tungsten or piano wire) will help a lot to reduce stress while being very effective. Aliexpress and ebay will have listings for this

[@misterb9786]

@21:15 Re: displays are (usually) interchangable with same pin: Question: Have you ever used one of those 30 pin to 40 pin adapter u see on ebay/aliexpress to use inside a laptop? I mean as long as screen/motherboard have same ldvs interface it shouldn't fry right (ymmv)?

[@drmoose7233]

what the hell was that all about at 33:36 ? funny is the way you have butchered that one out m8. lol. great video as always although I was looking forward to another bios programing video

[@tommorgan7043]

The mat works good. Makes me feel like I’m in the woods but color blind. 😁

[@j1e1r1r1o1]

good job, not easy to deal with these "glued" stuffs ...I don't think I have enough patience for these nowdays :D

[@David-tm4yj]

Great video as always, new mat looks brilliant and on the plus side tiny laptop screws will be easier to spot. You forgot to tell us that you're a time traveler as you went back to 2021 🤣, I know it's from the lack of CMOS battery though 😉

[@hove131]

The correct way is not the bags but a heated silicone mat made for removing screens which go up to 100c

[@simonlauer9379]

Would really like a video on how to source replacement parts. Recently ordered a replacement fan for a thinkpad. Hope it fits when it arrives from China

[@Bwyan]

New mat is great. Just keep using that one :)

[@green122s]

I think the solid colour would be best but this is certainly an improvement over your old one. Good move!

[@ArminAkhlagh]

Easily after the first heat and first pry point on the screen you can use adhesive desolvers like 530 sprays or some types of liquids. Just spray on the outside of the plastic card NOT directly to under the panel. And no need to more heat.👌❤️

[@jonathanmaybury5698]

your getting too good at this.

[@davidlguerr]

You said no backlight could be caused by 3 different causes, but actually it is 4. The LVDS cable could be not properly seated in the LCD connector, thus having no backlight, it happens all the time, even if the cable has been properly secured with tape.

[@ACOnetwork]

Camera on the bottom of the screen? That is first time I see that hehe 😁

[@TerribleResults]

With all those screws knocking about, have you ever considered using an ice cube tray to keep them more organised than "just some piles"?

[@pipercessna3827]

Nice job Graham. How are you surviving the mild Australian weather? 😓😓😓 I hope you are all safe and sound in the heatwave. Stay hydrated!! 👍

[@the_holy_forestfairy]

Good Lightning! The Mat is awesome! Where to buy?

[@Adamant_IT]

It's a thin mat, not super high quality, but was also cheap. Affiliate Link for Amazon UK - not sure if USA will have it! amzn.to/3zhFmTV

[@ciaspo]

New mat is 👍👏🏻

[@geraldharkness8830]

well done!

[@stevedebeukelaer1424]

Hi Graham why did you not try to fix lcd screen. Mostly there are fixable and mostly there is just capacitor or fuse shorted on backlight circuit that could you save a lot of money.

[@joshalonzo8488]

Mat looks fine. You can get a true middle grey mat to help with exposure. True middle grey 18% that is used in photography. Logitech Studio Series Desk Mat (Mid Gray) #956-000047. Not a certified 18% grey but this should work.

[@aso8446]

You can use suction cup to separate front glass to lcd

[@zx8401ztv]

I had to remove the vertical screen off my frends apple i-mac to replace the hard drive. I used a couple of old feeler gauges to slide under the glass. The gauges that were used for points or sparkplug gapping. Each gauge set have the rounded end and a selection of thickness. My old paint stripper gun on the very first setting was just hot enough. Never stopping in one place. No damage 😀

[@lesabre1972]

I like the matt you have there.

[@MrJavapiet]

This guy has a lot of experience, you recognize this by a lot of things he is saying

[@sylvainbel]

Wow tres bon video 👍

[@user-xx8lb7wg4s]

All Useful videos thank you very much..

[@horlixs]

Hreat video, i was holding my breath when trying to get the screen off :-) Can i ask you what the audio track you use at 25 min is?

[@luisrondonpaz5842]

Very good! I managed to reconnect t the display . Now I have a question, how can I make the computer power on using an alternative method or other type of power supply because the by accident the charger plug is broken ?

[@lordmmx1303]

First thing I do is connect external screen, and try key combinations. Also acer V5-572P have screen glued to touch panel and panel glued to back cover. and that's insane.

[@flyingfajitas]

Oh shit, the mat was this one. Nice.

[@ACOnetwork]

So buy correct panel, when you get it check if panel and touch (depends on laptop) works before any assembly or whatever. If works, just assemble and do everything carefully, take your time.

[@carlosgarciaoropeza5480]

I'm no expert but glass is melted and cast into molds so using a hot air gun to remove the glue shouldn't catastrophically affect it. To my delight, you did an excellent job of removing it intact.

[@Adamant_IT]

Yea it's not the glass I'm worried about when using heat, it's the LCD under the glass.

[@carlosgarciaoropeza5480]

@@Adamant_IT Yes Graham, totally agree. You were thinking much further. Understood (I had to watch the video again 23:02). In TV applications, it is a matter of not damaging the brown FFC (Flat Flexible Cable) called COF (Chip On Film). Thanks for answering. All the best.

[@uksuperrascal]

I have an old Toshiba Laptop that requires a bios reboot Toshiba Code - Toshiba say that the laptop is not supported any more - Is there any way to reprogram the bios IC to revive the laptop ?

[@jeremiah0150]

you can honestly fix the old LCD screen if you are willing to check the backlight LEDs

[@ToTheGAMES]

With a hard backshell and glued in glass, the chances of cracking the screen front glass is extremely high. Even while heating up the glue.

[@Adamant_IT]

I might have a look for science. I'm not convinced that the trouble of getting the backlight strip out and then fitting it again is worth it, but it might be easier than I think. I haven't looked into backlight repair because it's honestly not that common. Most screen repairs I do are cracked.

[@ashleynery8092]

i was going to suggest the same with a yt vid of course

[@facelessvaper]

2nd or 3rd grey👌, if the top is grey then I see white👍 The voice over makes me want to watch Rimmerworld S6E5 Red Dwarf

[@vinnyt]

I had apparently the same issue with an old dell. Decided not to replace screen and keep the laptop for spare parts. When disassembling it I found that the screen cable had not been correctly inserted from the factory. Pushed it in correctly and it now works again. Glad I didn't buy the overpriced replacement screen.

[@iamontech]

Edit: sorry I missed the part where you plugged in an HDMI to get output, ugh I shouldn't watch these while I'm working. great video as always, just wondering if plugging an external monitor was an option to see if the laptop was POSTing? Since it appears it was turning on in the beginning just nothing on the display itself.

[@iamontech]

@@TheSpotify95 Sorry I missed that part, thanks for pointing it out. I had the video playing while I was working so I missed that part.

[@cheezhat]

I worked on a specter 360 I think it was called and the problem I found out was every time you moved the screen the computer restarted, any idea how that one happend? I told them it wouldn't do it if they didn't mess with the screen. You ever see that?

[@VOLTRONDEFENDER4440]

my laptop also uses the system battery to keep time, thought the no post was the ram issue but it was the screen

[@supercomputing942]

thankfully not the ram because the ram is non-upgradeable and is soldered to the board

[@Adamant_IT]

This one did have an extra slot, but yes, one module soldered in 😔

[@benzima6058]

Nice one,hw will u Know a bios issue

[@frankbumstead3838]

Very successful!

[@Leon_George]

Can you put a mat in the washing? Or uh, more extreme, a pressure washer - maybe a test once mine starts ageing.

[@HoboVibingToMusic]

Did you stick the cover back on JUST to annoy someone? Cuz if it was for that, I salute you.

[@Andromedexx]

I have this exact laptop and the touch screen stopped working for no reason! tried all the software remedies but to no avail, could it be worth opening up the laptop to fiddle with the touchscreen connector ribbons? Great video!

[@romaine-ricardofrancis4690]

What if the sys battery is not able to hold anymore charge and you're unable to get a replacement battery, would it therefore mean that this laptop would cease to function since you would not be able to set the sys clock without it (with other laptops you could use mains for power) ?

[@Adamant_IT]

It can run it all on the charger, but the clock would reset every time the laptop is unplugged.

[@samjones1954]

hey, you finally got a torch and found out what I expected.... should have done that one before you even opened the unit...lol hate to tell you shit, but I have been servicing laptops for about 30 years now

[@jasonmills4159]

Hi Graham wondering if you help me source a replacement Screen for a Dell Inspiron 7506 2 in 1 laptop

[@Adamant_IT]

I would search ebay for "inspiron 7506 lcd" If the results are bad, try the model number of the LCD that's come out of the device and add "touch" to the end. A quick search, it sounds like "b156zat01.0 touch" is what you want.

[@raycymbalisty5503]

i use a hot knife for removing screens. that being said don't toss that screen you can recharge the LCD gel

[@bellshooter]

Looks a bit of a faff cutting that double sided tape, have you tried Bohning fletching tape it is narrower, available at all good Archery stores....and online of course.

[@samjones1954]

get a heating bed, and some times there is not adhesive supplied. Get a tube of B-7000 Glue.

[@leeverink32]

i hate that u pulled of the screen protector i had left that to the customer fo give them that new screen feeling. But what even pisses me of more is how you stuck it back on!

[@jo3rg047]

Cant you check if the backlight can get fixed ? Maybe it is just a bad connection or cable.

[@soreeyes3452]

Can you recommend a double sided tape for PC repairs?

[@QuentinStephens]

Nice one.

[@Ghost572]

imagine at the end as he was peeling off that plastic sheet, some static charge had built up on it and breaks something 🤣

[@Adamant_IT]

You say that, modern MacBook/air/pro screens have a nasty habbit of washing out if you pull the cellophane off too fast. They'll come-good after a minute or two, but yea, I think that's static. Scary when it happens on a £250 display assembly you just bought!

[@OriginalFinnish22]

Your Using Logitech Brio 4k and the picture is actually quite good.

[@javiTests]

I haven't finished watching the video but I'd like to say that when one disconnects the battery, it's always good to try to turn it on, so all capacitors are discharged. Typically it's going to be fine, but you never know 😅

[@sabsab692008]

u was in a hurry to change the screen although it is possible to fix the brightness just by connecting 3.3V between power on and dim test points on the screen board. need just to locate them.

[@jonathansnow5198]

Sorin from electronics repair school does this a bunch on his channel.