AT-6666 retune

[@rileysiphone]

Great video Mike 👍

[@GroundControl204]

Thank you. 👋🏻

[@575videogates]

I love watching your work! Nicely done. Keep it true, keep it clean!

[@careycraig4360]

Excellent Video! A VERY BIG THANK YOU!!!.

[@GroundControl204]

Thanks for tuning in sir. 73👋🏻

[@stonefacedgrasshopper2200]

That radio was flat out gnarly! Clippin', splatterin', overheatin' and bleatin' like a shorn-to-short sheep. And the audacity of charging for services not even rendered. Shame,Shame, Shame! The good work never stops, at Black Ops. Rock on Brother. Smilin', I'm off the key. Happy New Year!🥳 😑🦗

[@GroundControl204]

Thanks for tuning in brother, and happy New year to you as well. 73

[@TonyM7CVK]

Good morning sir nice work on the Anytone Q6, 26TG064

[@GroundControl204]

Thanks for tuning in sir. Happy holidays 73👋🏻

[@jodicastle3247]

Another awesome video that's a cool looking radio might try one sometime

[@davidclarke6658]

In Australia in the 80s, when 27mhz AM/SSB was big there was a few backyard techs in the business of modifying CB radios. I remember as a kid having my Uniden AX144 tuned to have a bit of extra power and modulation turned up and extra channels. The modulation was big and loud (the rage back then). But the extra channels the clarifier didn't really work (buzzed at a certain position). I managed to tune the pots he put in internally to get it on frequency without the clarifier position causing a buzz on the extra channels. Yes, some of his jobs were ok, others a fail (cowboy techs).

[@mattriley6866]

Hey bud, so just saw your video on the Quad 6. I have that radio & is bone stock. Absolutely the PL259 connection is a pain in the ass! So nice to see you call these guys on their work. I was hoping you would’ve shown what you did to fix that. Just curious. Wondering if you upgraded those caps? Great video.

[@mrradio2187]

Outstanding work!

[@GroundControl204]

Thank you sir. 73🫡

[@jasonfrye6473]

Wow, ...this video just saved me a great deal of aggravation I was considering ordering the exact same radio with the same upgrades Thank you for your honest review it was definitely helpful and I know it wasn't done out of spite just showing the truth. ...73s sir

[@GroundControl204]

Thanks for tuning in Mr. Frye and dropping a comment. 73

[@Douttawv]

It's about time someone comes out n shows the true hackery some of these so called wanna b ripoff techs do to people money!! Another I've been waiting for to b brought out to show the junk produced!! There's so many more I can't wait to see u end up with!! Another great job.. thank u personally ground control!! 👍🏻👍🏻👍🏻

[@GroundControl204]

Thanks for tuning in sir, I appreciate your comment and support. 73

[@Michael-xl8dz]

Ground Control kicking Ass and taking name's thank you

[@mikesharp8653]

What is the maker and model of your scope? Love to by one for my shack. Keep up the good work!

[@GroundControl204]

50mhz Siglent

[@tkring015]

That beginning wave was sending out the SOS for sure!

[@GroundControl204]

Yeah she was dirty as hell unfortunately. Thanks for tuning in sir, I appreciate your time. 73

[@ryandys8217]

Nice video sir! I like that!

[@GroundControl204]

Thanks for tuning in and dropping a comment. 73

[@deansocean]

Have you had any radios from Rooster CB in Tennesse come through? I'm wanting to know how their work measured up on an O Scope.

[@GroundControl204]

Rooster is a peak and tweak shop, he does not use an Oscope or any other proper equipment to do work. The only thing he uses is a bird meter.🚫

[@deansocean]

@@GroundControl204 That is what I thought, viewing his videos. The power mod is well priced at $65.00 and shipping though. I just don't want to have to re mail it to another shop for proper alignment. Will you do the power mod for a comparable price, and how much is a proper alignment?

[@DavidGrimmVNV]

Could you explain what you did to clean this radio up?

[@GroundControl204]

It was hacked to hell by a big name tech, too much stuff to type what needed to be done and how. Thanks for tuning in 73

[@artillerybugz6721]

Boxcars , all I've got to say . Good work

[@GroundControl204]

Yeah it was boxcar Wednesday for a bit lol. Thanks for tuning in sir. 73

[@mark-qr6yv]

There was no mention of what you did to fix the horrible overdrive shown at the start of the video. Was it possibly just backing down mic gain? That was the first thing I would have tried.

[@GroundControl204]

No backing down the mic gain will not help a poorly aligned and poorly tuned radio. All corrections had to be made internally! 73

[@mark-qr6yv]

OK. Just curious because your video and the one you linked to for the original modding done to the radio were lacking details about what was done or what the waveforms looked like on the other modder's bench. It left me guessing. Keep up the good work.@@GroundControl204

[@GroundControl204]

@@mark-qr6yv The linked video and that shop does not use an oscilloscope to tune the radio, improper tuning at its finest. You cannot do this work with just a watt meter, so I don’t what you mean about my work lacking, it’s actually the complete opposite and the job was done correctly‼️

[@equalizerny9263]

Hi I have a ranger rci 2970n2 I bought from eBay it seems to work well but I would love for you to give it a check upake sure it's at its best it could be.how do I contact you??????

[@GroundControl204]

It all starts with an email sir, contact me at [e-mail]

[@aaroncunningham5381]

Another radio ready to say "clean audio is the only audio". Just another shop to add to the CB Radio Hall of Shame. It seems like the hits keep on coming.

[@GroundControl204]

And that’s a big 10-4 brother, she’s riding riding a clean wave now. 73

[@BLACKHEAT1028]

Need a list of shops to stay away from when having tech work done. If I buy I Stryker I will buy it from you and let you do the work, you are legit

[@dustincottle250]

This is my fear. I ordered a President Johnny III from Effingham Radio Repair CB Shop. I ordered it off there their eBay store and it was listed as pro tuned & aligned. I received the radio with no notes or anything on how it preformed. The power cord ends look to have never been hooked up to a power supply. I’ve not yet got to hook it up myself to try it out. But definitely worried I got screwed out of the extra money if it turns out to be a stock radio.

[@GroundControl204]

The power cord ends are just soldered, which us techs call “Tin the wire.” Usually that solder will stay clean for years even after use buddy. I have never heard of effingham CB shop so I have no clue what they can and can’t do. You can send it to me for diagnostics and to correct any possible flaws with the other shops work, if it turns out to be good work the diagnostics is free and you will only be charged for shipping back to you. It all starts with an email sir. 73 [e-mail]

[@dustincottle250]

@@GroundControl204 Thanks for the response. When I hook it up and it isn’t right I’ll definitely reach out to ya. Love the videos!

[@Mr.Modulation.StatenIslandMic]

Expose the clowns

[@GroundControl204]

You already know brother, no slack. 73

[@239preachermanradionyny3]

Hi ground control happy new year wishing you all the best god bless you and family I watch and enjoy you This is Mario Preacherman 239 ny ny just to be fair in life Brian truck cb sale is a good person I do business with him bbi me coily wizard amps Carl build Thomas 5-0 antenna jogunn Dave made so please be fair in life and don’t tell people not to do business much respect gob bless be safe your friend Preacherman 239ny ny

[@GroundControl204]

I’m sure he is a nice guy, this video has nothing to do with his character. But I can’t recommend his work, especially when I had to correct a radio modded by him. Thanks for tuning in sir, I appreciate your comment and time. 73

[@arlenewolf5260]

/Hi how can I locate you to consult with you and have some minor work done

[@GroundControl204]

[e-mail]

[@PhoenixRising251]

I unsubscribed to TCBS immediately following this video. I've come to one conclusion, if you walk into any CB shop and don't see an O'scope, a sig-gen and a dummy load..... WALK OUT!

[@GroundControl204]

Yes sir, you got that right… Walk on by! 73

[@junkman2758]

That is so ugly glad you could fix it

[@GroundControl204]

Nothing a little re-tuning and corrections can’t fix. 73👋🏻

[@orazioscardace911]

Una ventolina e tutto ok

[@bboyles96]

Haha truck cb butcher shop! Nice clean up work!

[@clydewalker6882]

Hey Ground Control 204.. How's it going.. I've tried to find you on Face Book.. But not having any luck. anyway... I've been a subscriber for a while ,, and now I've bought a brand new Anytone AT-6666 and the only thing that been done to it.. is been converted over to 11 meter... And.. I'd like to get in touch with you.. and send mine to you and have you go through it and make it right.. So if you can let me know how to get with you.. Thanks.. ............Clyde,

[@GroundControl204]

Sure thing bud. [e-mail]