AT-TE Interior OVERHAUL: 17 Troopers TOTAL & Command Station Room - (75337 AT-TE Interior Upgrades)

I hope you guys enjoyed Part 3 of this Mini-Series! Like I mentioned at the end, if you have any suggestions to make this 3 Part series into a 4 or 5 Part series, let me know down below! As well, let me know what you thought of all the mods I did to the AT-TE!
Screenshot Grabbed From SolidBrixStudios AT-TE Video:
• LEGO Star Wars AT-TE W...
Follow me on instagram: / blaisetm
Follow me on TikTok: / blaise__tm
I hope you guys enjoyed, If you want to see upcoming alternate builds, mods & other videos hit the subscribe button!
#LEGO #LEGOstarwars

[@simoncostra4619]

The control room for Rex and Cody really looks amazing

[@BlaiseTM]

Thank you! I like it too, I wanted them to have a real solid official command area!

[@Russian-Konni_group]

​@@BlaiseTMPlease use the macro buinocuilar from 501st battle pack and use it onto the 212th trooper why nobody had this idea but only me

[@link8296]

Wow, imma need a toturial😂

[@BlaiseTM]

Ill be making a tutorial over all my ATTE Mods after all the parts are released!

[@zacharyriddle4440]

@@BlaiseTM I'm looking forward too it, I can't figure out how you connected the panels to the technic bar in the front section seen @ 2:00

[@501stcaptainrex3]

@@BlaiseTM let’s goooo

[@brandonsmith4039]

@@BlaiseTM when will you release the tutorial

[@zacharyriddle4440]

I think that a secondary plate with weapons racks and supplies that you could switch out with the troop transport version would be cool, the possibility of having a quick change plate would really open up the possibilities of other modules as well such as a medics bay, repair station or even a mini AT-RT if you can fit one

[@awesomemydog5569]

4:00 : there is one impostor among us

[@jacksteele9088]

I commented this on the last vid but another thing you could do is put 2 1x2 cheese slopes underneath the bars at the front of the cockpit, because in universe there is a bit of sloped armour there. Apart from that I think you've done a fantastic job. 👍

[@BlaiseTM]

Does this picture show it? www.google.com/search?q=at-te&rlz=1C1VDKB_enUS955US955&source=lnms&tbm=isch&sa=X&ved=2ahUKEwjOrb6cjZj7AhXAAzQIHXkhCRIQ_AUoAXoECAEQAw&biw=1920&bih=969&dpr=1#imgrc=4NgOFeTuFcwe7M I think I see it in there, Ill work that in for sure! Ive got some grey cheese slopes ready for it!

[@Noah-cl8cv]

No???

[@jacksteele9088]

@@BlaiseTM Yep you can see it there 👍 Awesome mods by the way great stuff

[@whyamihereagain7304]

3:44 All the clones crammed inside : 🗿🗿🗿🗿🗿🗿🗿🗿🗿 shuri: 🙂

[@Spinosaurus_Aegyptiacus]

funniest anime profile picture

[@NicholeLucido-wx4yb]

lol

[@NicholeLucido-wx4yb]

saitamas better though

[@ray_builds]

dude i absolutely love your channel! Awesome improvement to sets and all easily done!!!

[@BlaiseTM]

Thank you my friend! Im happy you enjoy the channel & the mods!

[@lowlylad3457]

Amazing job, can't wait for the next parts! You earned a sub from me fo' sure!

[@BlaiseTM]

Im happy you like it my friend! Thank you :)

[@madmtbclassic1570]

Very cool modification and now the at-te is dope

[@BlaiseTM]

Thank you!! 😁

[@gabrielstevens5474]

i love all the mods you did to the lego ata te i think they are a 10/10 i would love to see a tutorial on how you did these amazing mods

[@BlaiseTM]

Ill be doing a tutorial on some of the AT-TE mods I did soon! 😁

[@bottiglia_77]

AMAZING

[@BlaiseTM]

Thank you :D

[@RangebzzzrKitKatRBM]

3:51 lol ahahhh

[@atomicstud]

This is so cool I’m gonna do it

[@BlaiseTM]

Heck yeah do it! Toss a few seat pieces in the rear cabin and you are good!

[@porgstew3657]

Ha! I got 18 in mine (including turret) 2 in the cockpit, one in the turret (17 if that doesn't count), 5 in the front section, and 10 in the back

[@BlaiseTM]

Very nice!

[@SnowmanFilms1]

I think somewhere on the roof there is a hatch to go in. Your mods are awsome!!

[@BlaiseTM]

Thank you my friend! I worked a hatch into the cockpit area but I think your right, I think there is another one in the rear section! Ill see what I can do & Im happy you enjoy them :D

[@SnowmanFilms1]

Love your stuff

[@Nic9458]

On mine I have the plate with all the seats in the back interchangeable with a plate of the same size, I have one that is a small at-rt bay which has room for one minifig scale at-rt and one trooper inspecting it in the back, it can be completely closed up and can look really nice when displayed from the right angles

[@giygas9305]

Would be cool to have an AT-TE with a fully modeled interior

[@GTDeath]

How did you connect the control panel in the middle to the back of the cockpit as seen at 1:58 there is like 5 panels connected to the technic bar and I can't seem to figure out what part you used. Note: it is not the side panels which is shown at 2:06 I am talking about the main one which Rex was using at 1:32

[@dhdbksks]

Can you try and connect both rooms using the door in the middle but still having the handle feature

[@BlaiseTM]

Id love to try! The middle houses a lot of structural bits to hold the whole thing together so it’d be an interesting challenge!!

[@pmiller7148]

There doesn’t have to be a pretend hallway 😃 I took out the carrying handle and opened up a complete 4 stud wide pathway between the 2 interior sections.

[@pmiller7148]

There’s a technic build that the middle two legs attach to that can be vastly downsized into two 1x3 beams on each side with the red axels going through. Then mount this atop walls on each side and add a brick underneath where the handle would stick through

[@HeardCase]

What if you try to modify it so you put a 1person walker folded inside like in the turbotanks ?

[@itsyaboililnass6606]

if it could be possible could you try to make an at rt realese in the back😀

[@BlaiseTM]

I REALLY want to try this. When rewatching TCW for reference photos for my mods I saw Lightning Squadron and I gotta try it at least. Ill let you know how it goes!

[@itsyaboililnass6606]

Thx

[@newmombasastreets1459]

When the next part coming out?

[@oogieboogieproductions]

u should put in the at rt deployer

[@BlaiseTM]

Id love to try and work that in!

[@oogieboogieproductions]

@@BlaiseTM I would suggest extending the back of the at te (if possible) so the at rt deployer doesn’t take up the whole space

[@DerekSavage-xc4sf]

How do you build the stuff like that ❤️❤️

[@con3.0-_-8]

can we geta tutoriul for the command room because I look at it and it looks achievable butsome parts look to complex

[@Grey_Grey121]

Could you make it 501sr

[@nickvonemigrate]

Some sort of hatch pls

[@BlaiseTM]

Definitely still want to do that, I think some heavy modification to the way the side plates are attached, and using the stickered 4x4s as the hatch are the way to go.

[@rift8767]

could you do more 75336 mods?

[@BlaiseTM]

Yes! Im planning to revisit that set soon with some more mods!

[@501stcaptainrex3]

How many clone command stations did you use for this

[@BlaiseTM]

I think 2 or 3 for all the control panels!

[@Da_Bunny]

When is the tutorial coming out

[@thegreatsnowblizzard3196]

Will you be doing a tutorial for this?

[@BlaiseTM]

Yes I believe so! After all the ATTE mods and parts are out Ill do a tutorial!

[@nazrinchemuslim3666]

Tutorial? For all parts

[@NicholeLucido-wx4yb]

turtorol please

[@Kengan_Vajra]

2:04 how do I do that? The ones that are on the wall (that the cockpit is in)

[@BlaiseTM]

Skip to 2:07, Its a got a good side shot of the pieces used for it! Using a L-shaped bracket that faces studs on the side to attach to the wall, then a brick modified with the control panels on top of that!

[@SlimeRancherBeatrix]

Can you do alternative build of the lego 75338

[@BlaiseTM]

Ive had a few ideas for this sets alternate builds, we’ll see what I end up with!

[@SlimeRancherBeatrix]

@@BlaiseTM a razor crest

[@BlaiseTM]

@@SlimeRancherBeatrix Oooh, okay! A mini-crest so to speak! 😁 Ill see what I can do my friend!

[@SlimeRancherBeatrix]

Yes

[@cardboard9124]

is there a tutorial for the cannon?

[@BlaiseTM]

There is! You can find the PDF version on patreon, or there is a video version on my channel here: kzbin.info/www/bejne/rWrXn4mGjaeWlck

[@cardboard9124]

@@BlaiseTM thanks!

[@zeldock560]

Why’d the piece scream at 3:51 💀

[@BlaiseTM]

They just be yelling sometimes 💀

[@_Vibris]

Tutorial?

[@kapitan.klapcio]

1 girl 16 clones