Easy way to repair 12v lead acid battery step by step , Awesome project that can help you

Buy components at lower prices at LCSC.COM bit.ly/2VEJ5Zt
Easy way to repair 12v lead acid battery step by step , Awesome project that can help you save money
Related Videos
1. How to make DC motor at home , homemade electric motor easy
• How to make DC motor a...
2.How to create robotic at home , Homemade small robot 2017
• How to create robotic ...
3.How to make soldering iron using lighter
• How to make soldering ...
4.How to make scrill machine at home using spray can and small motor
• How to make scrill mac...
5.Homemade a small and fast car for kids
• Homemade a small and f...
6.How to make 220V solinoid engine at home
• How to make 220V solin...
7.How to make super transformer at home
• How to make super tran...
8.How to make foam cutter at home
• How to make foam cutte...
9.How to make mini grill stove at home
• How to make a mini gri...
10.Free energy device
• Free energy device new...
11.Boost converter using small NPN transistor and 1.5 V AA battery
• Boost converter using ...
12.Motor as generator 2017, Homemade generator from DC motor
• Motor as generator 201...
13.Motor as generator , Homemade motor generator from old vcd player
• Motor as generator , H...
14.Motor as generator from small motor, Energy of small motor homemade 2017
• Motor as generator fro...
15. How to make scrill machine using 12V DC motor very easy , homemade scrill tool 2017
• How to make scrill mac...
16.V3 Solinoid engine whit 3 7 V, A powerful machine made in 2017
• Video
17.Wireless Electricity Transmission Review made in 2017 , New Project 2017
• Wireless Electricity T...
18.How to make electricity wireless transmittion 2017 step by step
• How to make electricit...
19.How to make Easy motor at home 2017
• How to make Easy motor...
20. Phone charging using small battery
• Phone charging using s...
21.Free energy , from small to a powerful energy, Phone charging using 1 5V AAA small battery
• Free energy , from sma...
22.How to make a powerful air pump at home very very strong
• How to make a powerful...
23.How to make 3V Battery from coopper wire
• How to make 3V Battery...
24.How to make mini Hydrogen Generator at home very easy
• How to make mini Hydro...
25.How to make an Electricity Generator from old HDD motor
• How to make an Electri...
26.How to make a mini flashlight 5W
• How to make a mini fla...
27.Amazing life hack , Easy way to cut roof (Zn panel) using wire
• Video
28.My Electronic lock desk , new idea created in 2017
• My Electronic lock des...
29.Free Energy , Homemade Free Energy Device From Syringe And Water
• Free Energy , Homemad...
30.Free Energy , Free Energy from magnetic, magnet motor 2017
• Free Energy , Free Ene...
31.Free Energy , How to make solar cell from LED, LED Vs Solar cell, homemade 2017
• Free Energy , How to m...
32.Free Energy , solar energy, capacitor charging LED as solar cell
• Free Energy , solar en...
33.Free Energy, Solar Energy, homemade easy solar cell 2017
• Free Energy, Solar Ene...
34.Quad motor helicopter Vs Single motor helicopter, homemade mini helicopters
• Quad motor helicopter ...
35.How to make V2 water pump at home , new model of water pump 2017
• Video
36.How to upgrade 3v DC motor to a high speed and strong motor
• How to upgrade 3v DC m...
37.How to make a mini water pump at home very easy, Homemade 2017
• How to make a mini wat...
38.homemade easy motor from CD panel 2017, a strange motor for 2017
• homemade easy motor fr...
39.ir remote control testing up to 40 meters range, homemade ir remote control without any ic
• ir remote control test...
40.High voletage capacitor, super capacitor , how to charge capacitor
• High voletage capacito...
41.Super motor , homemade easy motor 2017 , new idea to create motor
• Video
42.Free energy, solar copper wire, new idea to create solar cell
• Free energy, solar cop...
43.Very small battery, how to make a small battery at home very easy
• Very small battery, ho...
44.Homemade scrill machine very easy 2017 , a powerful tool
• Homemade drill machin...
45.homemade coilgun , a powerful coilgun 2017 part 1
• homemade coilgun , a p...
46.Homemade coilgun, a powerful coilgun 2017 (part 2)
• Video
47.Free energy, diode as solar cell, new idea to make solar cell 2017
• Free energy, diode as ...
48.How to make spot welding machine at home 2017
• How to make spot weldi...

[@DomonCasuey]

And after watching this, I decided to buy a new one.

[@mpetach]

Here in California, it would cost you more to get the syringe full of acid than it would to just buy a new battery.

[@ZaidKhan4481]

@@mpetach distilled water works too, right?

[@tayab7394]

Lolz

[@Jake2670]

@@ZaidKhan4481 U have to have a % of acid too, thats what I'm looking for down here

[@ryantj7284]

😂😂😂😂😂😂 same here

[@Rey_Psico]

I was trying to repair a battery.. But u changed my mind. Thank you...

[@dan_6915]

Yeah, it's not worth it

[@NvArya]

😂

[@icraftcrafts8685]

that's a first worls country option. not a joke.

[@Jay.L_Pro]

ReyPsico 😂

[@bj2bj260]

i tried this many times kzbin.info/www/bejne/gKXXYqN-gdCXgJo

[@BeeTee177]

I hope you earned enough money with this 1.9M views to buy a new battery 😁🥳

[@mariodabek1441]

he spent more on materials and tools than a new battery cost

[@Palmit_]

it's only 5ah as well. they cost about $15 brand new in 2024 😂

[@lisacalais5975]

Making use of the kzbin.infoUgkxcJ22tnHH9l1vjdIdEIG27iOG55P7LXI8 reconditioning plan, I just saved 2 auto batteries from being completely junked. The guides were very simple to follow. I wish I would have found this years ago! You may use the guide to recondition any battery type

[@mhypixel_fake2893]

Qc ncc

[@1thailover]

after i saw how easy it was. i rush to the workshop to buy a new one. anyway thank you for the video

[@mymine8298]

Funny

[@NSilver832]

If that was the easy way I don't want to know the hard way.

[@rex5485]

My thought also just when he just tried to saw the battery.

[@DG-kk5pm]

THe hard way might be working your regular job until you have enough spare money to buy a new battery.

Easy to die because quimics contact

[@electroworld8733]

It’s nice

[@Rabbit.760]

Hard way requires standing in the center of the north pole while face south, then realizing you left the battery at home

[@Mr.Science-daan]

He used tissue paper as insulator which not right it should be some thing like polyester... Tissue paper is a plant cellulose which will dissolve in sulphuric acid

[@sdawson2214]

Toilet paper & kitchen towel all dissolve in plain water as are designed to, if not all sewage works would block up.

[@alexanderthewise1352]

Correct, the paper used is glass micro fiber. Oddly enough, add water and it'll dissolve quicker than toilet paper. It is stable in acid though.

[@alexanderthewise1352]

@@sdawson2214 Paper towels dissolve very slowly in water and are the source of many clogged pipes. They belong in the trash, not in a sewer system.

[@tecnicsboys]

Cottoon? Algodón??

[@GotchaYT253]

​@S Dawson so?

[@CharlieDeltaEchoVict]

Thanks for the video - I learned about the internals of a Lead Acid battery - that was useful. Surprising to note that the Lead Acid battery used in our modern vehicles has not changed at all since its invention in 1859 - 150 years ago!

[@josepeixoto3384]

No need to change,THEY are making a fortune as it is; the battery continues to be one of the weakest parts of a car

[@holidayrap]

Neither has the wheel.

[@obviouslytwo4u]

I have changed more than you realise because modern batteries don't last as long. 5-years max but older batteries would last 15 years easy

[@robinsheng3436]

Very great Video for diy 12v 18650 battery,thank you the blogger，we are Turemra who is focus on the manufacture and modification of lithium batteries, we have a series of modified accessories such as car batteries, ups power supplies, bicycle batteries, etc., and provide one-stop shells, protection boards,chargers, batteries and accessories, this is our 12V 30AH-35AH Motorcycle Battery DIY BOX with 40A BMS, from Aliexpress, welcome to buy! www.aliexpress.com/item/1005004241982847.html

[@VanBC-xu1dh]

@@obviouslytwo4u The lead plating is thinner on new batteries and they cheap out. Some are only lasting 3 years depending how you use them.

[@randomstuffwithporgy3879]

Great to know when you can't just go buy something. Had a few situations like that. Appreciate the time and information you put into this.

[@naranbalami7906]

PPP loan 0llpp PPP ppp PPP ppp pp PPP PPP p PPP p PPP

[@naranbalami7906]

PP PPP l

[@naranbalami7906]

Pp0

[@naranbalami7906]

PPP PPP pp PPP pp PPP ppp pp PPP PPP pp0pp PPP

[@naranbalami7906]

PPP pp PPP pp PPP p0000p00 PPP 0 PPP 000 PPP 00 PPP 0p PPP p PPP p PPP 0p PPP p

[@pramodmallik]

Thanks for showing us the cut section of SLA battery.Repairing of rotten cell plates and insulating with tissue papers definitely proved that you are honest to your viewers.still then I appreciate your hard works rather most prudent to buy a new one or go for lifepo4 chemistry battery

[@betruly7894]

Thank-you for this video. I expected at least you test the battery voltage before and during load then after load.

[@kevinrudd9096]

This video is not suitable for rich dudes. But very useful for the poor.

[@mrpsychodeliasmith]

This must be some new meaning of the word "easy" that I was not previously aware of.

[@thanhrsu]

Thank for the video at least I know what inside battery case

[@jitendrasuthar180]

Fun Fact: Guy in American tech channel is Indian

[@petitleondieu]

He spent more on epoxy than the cost of a new japan technoloqy battery 😂

[@jeremyrock9305]

macgyver sboub yeah that’s a 28 dollar battery @ battery mart

[@naimrf]

That epoxy is of just 3 dollars

[@habireddie4674]

Good idea ...

[@electroworld8733]

Right

[@Bobby-Love]

Commie chinese tech. And useless.

[@OWK000]

Those lead plates still look to be in excellent condition. Water would have probably been enough with a graduated trickle charge lasting a few weeks. A cheap solar charge controller (with 20 watt or more solar panel) will charge any lead acid at 1/10 of a volt more than whatever the battery is currently holding. Modern solar battery maintainers that are low watt and close to 20 volts in full sun are too high voltage and won't work: they are basically worthless. Solar panels used to have lower voltage back 30 years ago or so, but improvement in technology was made and voltage was raised. Great for use with a charge controller and inverter, but not good for 12 volt trickle panel.

[@jimsinnovations2737]

Not sure how easy this would be but still really cool to see

[@chrisp4048]

Spends more money to revive than to replace! 😊

[@vittoriobacchiega9118]

Teo technical aspects that reduce reliability of rework: 1) the reducrion of plates thickness 2) liquid acid constrain to inspect the level instead the gel acid. Too effort with no reliability.

[@oscar3611]

Thanks tot the info. Those reactions on better buying a new one are not necessary, for many people $15-30 is too much for a battery. I want to try your method, what acid did you use, and where to get it?

[@alexanderthewise1352]

Trouble is his paper towels will dissolve in short time. Microfiber glass is used in batteries. First or third world, this wont work when the paper dissolves and it'll never hold load. Should've built a fire instead.

[@thecrew2team633]

👏all that for a$27 dollar battery but the point is you made it work but if it was a $200 batt I would be watching this video over nd over to fix it's not the price of batt it's a reference to all batteries 👍👍👍👏🎉🎊

[@dan_6915]

Even if it was 200, not worth the effort and risk of inhaling sulf acid fumes and lead

[@jeremiahlucey561]

*This battery reconditioning program exceeded my presumptions. It worked on any drill battery, several AA and AAA batteries, **batery.repair** and any camera battery. The steps are simple and the act itself is exciting to do. No matter what type of battery you`ve got, it is sure to function again!*

[@ELTABULLO]

@Kris Pea hardware store or from a local mechanic

[@edwardmoyer3189]

a video that dont get to the point your, it a joke dont click the link

[@khanhassan457]

The way he opened the battery though 😂😂😂

[@GoldenShaolinNutz]

That Easy! Thank Goodness, Makes my refurb decision easier. Its going in the trash!

[@p.j9102]

It's good to know how to do. Everyone keeps downing the idea but knowledge is power and 1 day it might be useful.

[@annierenard5954]

a good tutorial how such battery is made

[@PhermondRaj]

The terminals are corroded why haven't you cleaned them

[@Gonzalez1003]

He haven't has the time---

[@rodrigoaraya3992]

Muy buen video. Felicitaciones. Va like y suscripción.

[@mesutpeynircimax451]

Fantastic! Agm batteries are darn expensive to replace, think a couple of 200 amp agms can be recycled the same way.. Thanks for sharing.

[@Jake2670]

I would say so, just b a lot of mat, just googled it, not cheep , then u got the acid

[@akekapol]

Good to saw this vdo. I will buy new battery for sure :)

[@mymine8298]

That is a real point

[@puzzled4163]

Safety first wear latex gloves and use a wire to direct short the battery.

[@alexanderthewise1352]

The lead dust in that battery went straight through those latex gloves he used. Nitrile gloves are used in manufacturing batteries and the lead particles still make it through. A special soap and wipes are used to remove those particles. Specialty respirators are also worn. This video is bad juju.

[@willyrivero470]

I'm not sure if you really know what you're doing.

[@ullianove151]

.a very small amount of that lead...if ingested accidentally... enough to put down ur spark...

[@skmgamer8214]

The title should be hardest way to destroy L.A.B. Whish is nicely done 🤘😊

[@floyd1986]

Weather it works or not I have an idea on how to try. Thanks for the video.

[@heribertogutierrez2416]

Tremendo trabajo Felicitaciones

[@krizkruz4566]

gracias amigo por este vídeo,es el que he buscado por mucho tiempo,

[@aref9108]

👌🤙 احسنت صنعاً

[@DeepakGautamX]

1:12 point where I realises where it going. I am out. 🤣

[@skmgamer8214]

😂same bro Pr Mai end to dekha kya chutiyap krta hai😂

[@Infinite_Mainak]

😂😂😂

[@1sachnev1]

Спасибо за трудолюбие и оригинальность - классное мышление +++++++++!!!!!!!!!

[@RalphDon21]

That was easy, now I'm gonna buy new one.

[@user-uu6rr4cz3u]

Отлично, мне понравилось!

[@johndunn9819]

every few months the tell us there's "new battery technology" that's going to revolutionize batteries. and all i ever see is 1930s design with added designed obsolescence so they'll fail in 11 months.

[@LMF5000]

Lithium iron phosphate batteries are practically maintenance free, they last 2000 cycles instead of 300-500 cycles of conventional lead acid. However they cost 3-5x the price.

[@alexanderthewise1352]

Application matters. Lead acid batteries are horrible at storing energy for a solar or wind grid, for instance. They're ideal for many things, like the voltage to jolt your car into action.

[@Perepodvyvert_s_perevorotom]

04:48 Real scissors for real man!

[@Fehi]

😂😂😂😂😂😂

[@HelEn-qw6qs]

Amazing ! Thanks!

[@ugiove9352]

Al primo avvio del veicolo la saldatura salta... Però apprezzo la tenacia..bravo

[@JerryDoe]

"easy" puts a few paper towels in between the plates and watch battery explode after paper dissolves in acid and plates touch each other.

[@Slide100]

Jerry Doe . Exactly what I thought. Paper towels are NOT a replacement for glass mats!

[@Jake2670]

I doubt those were paper towels but I am wondering what he used, nothing so far - my guess could b a HD handy towel, they pretty tough, I reuse em after dry out if not too dirty

[@JerryDoe]

@@Jake2670 acid will dissolve cotton, synthetic etc... Original batteries use glass fiber between the plates

[@Jake2670]

@@JerryDoe well, you said paper towel, if read down, n I didn't think about it, this is an AMG battery those are glass mats so you would have to replace it with absorbed glass mat

[@Jake2670]

He may have cleaned And re soaked it in some way but his video is definitely not very detailed or complete

[@walterlichter4781]

I always thought to myself, once in my life I want to open a dead battery in this way. Now I know I never will.

[@stealthboost2805]

I would just take it apart for the lead and buy a new one

[@peterdarr383]

OOOH you will - in about 10 to 15 years after the economic collapse !!

[@Andy-df6gm]

​@@peterdarr38310-15mths the way things going lol

[@Baterkar]

Just because the bulb has turned on does not mean that the battery is working. It should simultaneously measure the voltage and observe the voltage drop for at least 5 minutes. I believe that after this time the bulb would no longer light.

[@silebirthmanda4549]

Congratulations 1 million subscriber☺😕

[@paganant3623]

Why did he not just top up the cells first before taking apart that's why you have the holes at the top

[@coniferous3132]

he used the knife to also desulfate the plates. which... may help? this was a clear case of lack of electrolyte though, so I dunno.

[@paulnathanlam7013]

Looks like AGM battery , it’s not top up w acid , absorb glass matting . Good work

[@marlonbayaras2850]

soldering lead has flux resin on it, it could affect the battery chemistry, should have used a pure lead

[@peterdarr383]

I don't think he gave a flux

[@manonet1606]

O LOUCO MEU AGORA VOU TENTAR RECUPERAR MINHAS BATERIAS de moto

[@electronic7979]

Very good 👍

[@xDivinitysCreaturex]

You can desulphate it with a high frequency desulphator and clean the terminals. If you need to add water, then drill holes. Add water with a syringe. Tap the holes and plug with plastic acid-proof bolts. Or melt in some plastic or correct epoxy.

[@gajananphadte3440]

Desulphaters don't work. I experimented out of curiosity

[@giovannipg3000]

Why you dont make a video and show us

[@michael931]

Desulfator won't fix dried out SLA battery. His knife was the desulfator.

[@gasciotti]

I would not do all that work, but still I loved the video and foud it very interesting. Thanks a lot!!!!

[@nenadstanojevic1427]

Let's see how the battery pushes a Carbon pile load tester. While you are there, lets see a CCA meter reading as well.

[@homiecool44]

Anybody else ,damn near fall asleep watching this video?

[@GospodinJean]

Excellent video! Did you place a paper towel between the plates? or what kind of towel is that? I'm afraid that a paper towel won't stand the acid..... Which other materials would you recommend instead?

[@dan_6915]

Paper towell wont even stand water. That battery is good for recycling

[@jackkatogh]

That would be fiberglass mat to resist the acid.

[@overlycreative1]

My easy way, drop the battery at the recycle and Amazon a new one in.

[@christophermendonca7969]

Can you send me one while your at it ill take a 50ah 12 volt thanks

[@lahorimunda9032]

Amazing Amazon.

[@mazharaltaf4899]

Very good explanation to recover old battery.

[@tryitstd]

Just pour battery acid 37% H2SO4 to revive the battery.

[@myMotoring]

the acid will dissolve the tissue paper & will end up with internal short circuit

[@seharsgames]

Witch acid you used..???

[@kuntneteper3561]

Is the wire you use at the terminals copper? How will you prevent copper from rotting in sulfuric acid?

[@randomlife718]

It just needed to light a bulb for a few seconds...

[@user-li9xi9nk3o]

good สุดยอด

[@zainshahee]

6:00 diy soldering iron

[@lanzonex4WD]

Glow plug

[@josevelasquezcastro7488]

Hello mate ,that is good job. Can you tell me what papel your use in this proyect. I need to repair one.thanks

[@stevecoloma4073]

Tissue paper or toilet paper

[@RayRayGaming-xb3pz]

Dont do that the acid will eventually dissolve it and the plates will touch.

[@Jake2670]

I'm still looking for this info too, guess this guy don't answer his comments or put details either :-( If U respond in few days to this, I may have an answer

[@Jake2670]

Looks like AGM battery , it’s not top up w acid , absorb glass matting - just Google it

[@Tech4mukesh]

🌟Really different, i like it🌟 🌟👏👏👌👍🌟

[@darth1000blue]

Okay, now let's rebuild the Notre Dame Cathedral

[@Floridays48]

I would love to have seen the test at the end! but I could not see it, because you had a huge link for the next project option right in front of the light bulb! nice job, maybe you could watch out for that or stop pushing the projects we will see anyway as long as we enjoy your posts, which I'm sure we would all enjoy as long as the whole thing can be seen!

[@ATdiy]

Ok I will remove it. Thank you for correct me

[@alexanderthewise1352]

@@ATdiy How long did it take the "repaired" battery to fail?

[@K.Muthukumaran]

Electrolyte?

[@christopherperry8693]

Cool Idea, adding sufuric acid to paper towls. How long do they last. 1 or 2 hours?. If you are going to all this trouble to restore the battery why not use Fibre Glass tape as the divider like the manufacturers do its not expensive.

[@bacilluscereus1299]

Thanks for this. I will ask at the hardware store

[@CVIDALA]

Not easy... but this is the only way that work!!

[@bacilluscereus1299]

What was that fluid you filled the cells with? Percentage of sulfuric acid?

[@cnneville1962]

My personal opinion and I may be wrong. The distilled water in the battery had dried out. That's why very little liquid came out. I would have added a little distilled water to submerge the plates, and then charge the battery. If lucky, it would work.

[@guillermoosorio8462]

No se por que los comentarios negativos y burlones, pienso que es una manera de enseñar prácticamente, la composición y lo que se daña en una batería plomo ácido, cada quien es libre de hacer algún proyecto, sabemos de antemano que intervenir una de estas batería es peligroso y nocivo para la salud, tiempos invertidos y materiales en vez de adquirir una nueva, en estos temas todos son genios y habladores.

[@thepracticalfarmacist]

Thoroughly hypnotizing after a long day at work, and looking for a new battery ! You convinced me to never try this at home.. lmao

[@usmanpixelledlightingoffic6775]

I have a polymer jel battrey 155amps NARADA USA BACKUP only 30min Can i repair that

[@jachu7619]

Maby yes

[@emersonsrandomvideos248]

Wait. You did't even checked how much juice is there before you proceed. Edit: i'm not convince v coz there was no qualitative data before and after the repair. Good experiment though.

[@joelramirez4688]

Pinoy keyboard if the battery had any charge in the beginning of the video when he touched the two leads with the wire it would have sparked. So therefore he proves his point on how to revive a battery.

[@emersonsrandomvideos248]

@@joelramirez4688 Wrong. What i meant is the quantifiable amount of power left with that battery before it was disassembled and reassembled.

[@jcbdiggers1]

Better with the sound down..you will humming it all day

[@johnkapel2128]

I basically had the same problem with my battery. Last month when I was on my way to the store, my car died so I got my multimeter out and I checked the voltage on the battery and it was 9.7378 Volts so I thought “what the heck is going on with this battery”, the next thing I knew I seen some smoke coming from the tips of the battery terminals. I was suspicious on what was going on and I couldn't believe it because this battery was only barely 16 years old which I consider fairly new in today's society, so basically what I want to do is try to clean up the battery with some soap and salt solution and then I might put it on the charger for two or three minutes at a high current rate just to see if it will hold a charge. I'm not sure if that's going to help the battery or not but one thing's for certain before I go out and buy a new battery, I'm definitely going to try these two methods that I suggested. Now on the other hand I could swap the battery out with one from my 1962 Chevy Tahoe but I'm not sure that my old lady would let me do that, so basically what I need to do is first, I'm going to check all the air in the tires before I monkey around with the battery. Then I'm probably going to run a few errands around town down and the next thing I want to do is get some paint and paint the battery terminals because I don't think they look very good without the neon yellow color look on them. If all goes well, I am planning to do a few other things to the terminals. Next after that chore, is get some of that distilled water and pour on the outside of the battery to try to clean up a lot of the dirt and dust its accumulated over all these years. If I have time what I'll do after that it's try to clean both sides of the mirrors on my 1965 Ford Bronco because I've noticed while I was driving that it's hard to see what kind of traffic is coming up behind me. I was having a problem with the battery when I put the headlights on low beam and then when I tried to switch the high-beam I noticed that the voltage excursions were jumping around so I went out and I bought another set of test leads to use on my digital multimeter and there was no difference at all, so I think I may borrow my friend Tony Jones's multimeter just to check those voltage excursions to see if that is normal. Nobody really explained to me how to test a DC voltage excursions when the battery is not in its prime. I am all on my own doing this. A lot of people have contacting me and they said that they've had that problem once or twice and maybe even three times in their lifetime with their batteries but they did something totally different. What they did was loosen the terminals first then they carefully remove the battery and hoisted it out to get rid of all the debris and dirt that's accumulated after all these years then they put it on a slow charge which I believe they told me was 32 milliamps for 6 days, 3 hours and 54 seconds. Next they took the battery caps off and added some distilled water, which they claimed that they bought it at their local Walmart store. I think, if I can remember correctly, they said it was .99 cents plus the sales tax. Can you believe that just 99cents? That's a real good price for one full gallon of distilled water. Speaking of water, yesterday I helped my neighbor that lives to the right side of my house, fill their swimming pool for the new season. It literally took 7 hours to fill. I am not sure how many gallons it is. I have met people in my lifetime that had no idea that there were 4 quarts of water in a gallon jug. They just assumed it was a gallon only. I am not really good at math but I do have a calculator on my cell phone. Speaking of math, it takes me back to grade 11 in high school when my teacher, Mr. Lowry gave us a sneak quiz on algebra. I failed it because I didn't understand what that was all about. I spent most of my high school time stoned and kinda out of it. Some of my classmates were very good at math, and it even showed when they got their report cards. I may have gotten of the path of whatever we were initially talking about. I think it had something to do with blue cheese. No, I remember now, it was car batteries. I never could figure out why they put car batteries in the front of the vehicle and not inside the vehicle. It would be so much easier to work on them, especially in the rain, if they were inside the vehicle. Doesn't that make more sense to you too? Well anyhow, batteries are pretty heavy for their size and some people can't lift them very good. I had a fried, Tony Smith who had asthma and once he tried to lift out his car battery, and sneezed, and the battery fell out of his hands and landed on his right baby toe. It broke the small bones in that toe of his. I called his mothers step daughter Ann but she was not home. So I then called his brothers uncle Fred and told him about what just happened to Tony's toe. He seamed like he was drunk and started laughing at me and said “I don't care about that Bast#$ds toe”. I got mad and hung up on him immediately. From that day on, I never spoke to Tony's brother's uncle Fred. I never really liked him in the first place bacause when Tony and I were 13 years old, we were at a softball game and Fred walked over to us and farted right in our faces. That was not very nice of that old pervert. I heard some stories about him when he was about 20 years old that would make you cringe if you heard them, but I can't get into that right now because I have to finish up my posting here on you tube. I hope I have given you folks some good advice on having some of your problems solved in a timely manner. I like to help out when I can if it is at all possible. I am out for 3 more hours so I want to go now and get a hot dog and a bottle of grape soda. I need to look around for a ride so I can get back to my padded room at the Sinclair Insane Asylum. I hope Dr. Dilbert will not be mad at me for sneaking out....

[@HomeGrownPyro1]

Wtf lol

[@someguy9778]

What?

[@upnorth3431]

How does this guy have 1.12m subscribers?! Dark web click farms?

[@boonchoojones987]

Are you a web inspector? But I like you idea.

[@thecrew2team633]

Good work my friend keep em coming 👍

[@AliKhan-ow2xc]

Good job bro, very hardworking 🔩🧹

[@chucksmoko5348]

Some things aren’t worth the effort. This is one of them.

[@AliKhan-ow2xc]

I'm watching this video, 😀😀 I sure laughing non stop my face 😂😂 I decided to buy new one battery 😂😂

[@rvetcph5717]

Wow. :) Can i make to a big battery like trucks?

[@jachu7619]

Yes you can

[@mytechexplanations6923]

For that you need bigger plates ...

[@masudmotor1195]

Kalah mbek harno.👍👍

[@awaazmatroko5972]

This is better than other battery reconditioning, I have tried many, yet to try this one, pls some question: sometimes one or more of the cells fail, how to redo that, the acid used proportion with distill water??

[@AntonioZett]

1000°c?

[@christiangrindcore6190]

Copper wire inside acc is not a good solution, acid eat them all.

[@ericsalidbar1693]

What do you think was in-between every lead plate? Copper that's how lead acid batteries are made

[@hind_lover_]

I was in shop for a new one but after watching ur video i am at home with a dead one.,😀🇮🇳

[@monkeyflyer410]

You should watch the Pakistani's rebuilding their batteries, there's loads of it on KZbin. They're utterly brilliant, using simple techniques in minimally equipped workshops on the road side.

[@Ravikumar-zk7zf]

Better to buy a new battery

[@InterlacedTech]

It's very dangerous to revive a sealed battery after it gets unsealed ._. *Makes total sense*

If the lead is intact, there is no need for any of this, buy a desulfator device, and you can repair your battery without hassle. I have repaired many of them and the success rate is around 70%

[@FCA1975]

Too much work, but it’s nice to know this can be done. I wonder if this is what is done for most core batteries?

[@FantaBH]

Nice experiment. Nice work but at the end you found that it's waste of time. But youtube loves to pay for such videos so at the end of everything you probably found that actually it worth time invested.

[@debasismandal1924]

How much capacity is restored? Finally saw a way that actually works!!

[@pacapawarkop655]

I Did before it just about 6 month longer

[@debasismandal1924]

@@pacapawarkop655 did you measure the restored capacity? Thanks for replying!

[@wefukthenwo]

The best way to restore a battery in this bad condition like this is to use a DESULFATOR battery charger. Everyone should own one!

[@zadabjlil2281]

GOOOD GOOOD