AtGames Legends Pinball 4K (ALP 4K) Buystuffarcades.com graphic installation adventures.

#alp #alp4k #alp4kp #legends4K #atgames #legendspinball #virtualpinball #arcade #arcadegames #mod #superman #supermanthemovie #buystuff #buystuffarcades
Installing the graphics on the 4K was quite the adventure required some extra work and some replacement graphics. Buy Stuff was amazing in making this come together. HUGE thank you to them!
Everything you see here I purchased personally.
I am not sponsored by anyone.
Nothing seen here has been provided to me for free (except the replacement graphics).
The links below are unaffiliated except for the ones from Amazon, as I receive a commission from those purchases.
Superman2 Graphic: www.buystuffarcades.com/produ...
ALP HD and 4KP Control Deck Graphics: www.buystuffarcades.com/produ...
Scotch-Brite Hand and Nail Brush: amzn.to/45BIp7T
Kellogg's R2-D2 Mail Away Bowl: www.ebay.com/sch/i.html?_nkw=...
Warner 3" Carbon Steel Flex Putty Knife: amzn.to/3znCCXu
Canvas Drop Cloth: amzn.to/3VSIwc5
Scotch Blue Painter's Tape: amzn.to/4cjuN40
The GamersNexus “Volt” Series Modmat: store.gamersnexus.net/product...

[@raydelatorre9532]

Thank you for the video. I'm considering changing my Addams family 4k to Monster Bash

[@BuyStuffArcades]

Was a bit of an adventure to be sure, but turned out really great!

[@N3cr0666]

And just like that, Rewind becomes Fast Forward. Cool trick.

[@lamontcranston1003]

Well done, and thanks for the video.

[@BillyWoods-Mods]

Thanks for watching!

[@Brian-Vader4633]

Looks awesome. I always use the door hinge method to apply these. Tape it down the middle and apply half of it and squeegee to the end from the middle. For the buttons, you can just leave the wires attached and remove the switch from the button leaving the wires attached. Take a pic of everything or label it. Love the Superman theme.

[@BillyWoods-Mods]

Good stuff!

[@kdub1159]

Great video just curious wouldn’t it be easier to do the wet method then you can move the vinyl around or am I just a noobie here?

[@BillyWoods-Mods]

Thanks I think the wet method may have made it worse, if there was a tear some place else in the graphic the water\fluid may have gotten underneath the old graphic. Just a thought I am by no means an expert.

[@stringerfilms.]

Why would you cut out the button holes before applying the art? 😂

[@BillyWoods-Mods]

I'd rather pull the buttons and have a more seamless fit than cutting the hole larger and risk making them too big. I'm not an expert and can barely hold a tape measure much less use one. lol

[@pudgex76]

Would a hair dryer work rather than water?

[@BillyWoods-Mods]

Not sure. If I had to do it again I would try it... But considering that there's no real sticker left to peel off, I don't know whether or not it would work.