Replace Blower Motor Resistor On A Land Rover Discovery Series II

No heat in your Discovery Series II? Is the air conditioning not blowing cold air? Does your blower only operate in high speed setting?
The general reason for this is a faulty Climate Control Blower Motor Resistor.
Watch Doug, our Land Rover Master Technician, show you how to access and replace the Climate Control Blower Motor Resistor # JGN100010G.
0:11 No heat or air conditioning
0:25 Resistor controls blower speed
0:45 What resistor looks like
0:59 Cooling fins
1:22 Location of JGN100010
1:51 Moving glove box
2:55 Unmount old resistor
3:19 Disconnect resistor connector
4:21 Replace with new resistor and reverse process
4:43 Ordering information
Parts List:
Climate Control Blower Motor Resistor
www.roverparts...
Questions about this video? Call our knowledgeable sale staff at 1-800-533-2210 or contact us via live chat at roverparts.com
For more how-to videos on the Discovery Series II and other Rover vehicles visit www.roverparts...
#atlanticbritish #discovery2 #climatecontrol #blowermotor

[@JUKE179r]

I'm taking apart my Disco's blower motor to clean it out and relube the spindle. I didn't think about checking and cleaning the resistor's heat sink until I saw this video. Cheers!

[@muninn279]

Just bought a D2 last year. AC was always blowing kinda rough making loud noise. Finally went out. AC compressor idler bearing was replaced, ended up burning out my AC compressor. Had that replaced. Now on to the Blower motor. Thank you so much for posting this. Definitely need to invest in some new tools because these are very tiny spaces where the bolts are.

[@TheMarcball]

Thanks for posting this, I'm gonna investigate this as the symptoms seem to match. Keep on trucking ! (from rance)

[@My65isblack]

Thanks for the video! I did exactly what you did on the video and is working 💪

[@jjt1093]

Great video, not sure if you made in on my request but awesome timing.

[@davidwhisson1810]

Great video I’ve just change the resistor on a discovery 3 I have A discovery in Cyprus with no air-conditioning no blower at all I’ve tried everything so when I went back to the UK I ordered a resistor from Brits parts just changed it very easy to do everything is back up and running Aircon is lovely heaters lovely very easy to change once you drop the Glove box

[@johnwindsor5239]

Do you have a video for LR2 resistor replacement

[@Shady-Shane]

hi any idea my climate control heater works on my side rhd, but passenger side stays cold, fan blows great thanks for the videos p38

[@allenshakhmalian5746]

Questions,Does anyone know after changing this resistor do we have to reset anything? The reason that I’m asking is because I change the resistor and it didn’t work I took it to the dealer they changed the same resistor that I bought and it worked I asked them how come it works when they changed it obviously they didn’t answer me thank you

[@jagadishraob1332]

What is the part number LR31677 isn’t this also a blower motor resistor for the LR3

[@brianlrrover3633]

Great video. Now my blower does not turn on at all. I've tested in and it worked and Ive tested the head unit and it works I also here the relays clicking down there when I turn on the head unit. If the Blower motor resister is blown that could cause it to not work at all correct?

[@showrunner2183]

This is usually the part you need if your battery keeps dying (parasitic Draw) on your Range Rover l322.

[@georgef7631]

Hi, I don't see the relation between those two issues, can you explain how this part comes in play with the engine off and the electronic in sleep mode?

[@JonTheGeek]

Hi I'm currently in the middle of doing research on this, under my blower motor I have a blue and a white/pinkish that are just, rusted through and green. Any insight on what those do?

[@DickonCider]

Thanks! Completely unrelated but I have a microwave oven fan doing this. Should have 3 speeds but all 3 settings go to “high”.

[@vladicazekic9653]

sorry, I've been watching you for a long time on KZbin, could you tell me where the resistor is located on the land rover sport l494 2014bj, thank you

[@vladicazekic9653]

0:34

[@user-ch1vu8bk2k]

I replaced the resistor and blower wheel and my settings won't allow me to change it from high. It will not work in any other setting thoughts?

[@katabomar]

My blower works, but I feel there is air escaping from the vents. when I change the air mode options on my climate control it doesn't make difference accept the air level works. Also my heater works just fine. Please advise thanks in advance

[@kahmiliaallen9947]

I have a question please it u can help me figure this out. So when I turn on mi heat in my 2006 Range Rover sport I’m only getting warm air thru one vent the rest is blowing cold air. Plz let me kno the problem thanks so much

[@mikefranke9702]

On my 2003 there are two copper colored strews two take out

[@barbaofael]

Is it the same to Discovery 1 300TDI?

[@atlanticbritishrp]

Since the diesel versions were not available in the United States we would not know if it is the same for the TDI models.

[@killsalive1]

How much would this cost?

[@atlanticbritishrp]

www.roverparts.com/Parts/JGN100010G

[@DickonCider]

Speaking of mice.. I purchased a 1995 p38 Range Rover SE 4.0 that needs the engine wiring harness spliced back together because of mice. Anyone have a good clear picture of the harness and / or know where I can find the proper schematic? Seems simple enough just orange to orange etc but not sure what’s what without a diagram or tracing every single wire. 🤯