Attaching your Little Bull Loader to your John Deere - Updated!

We've updated the process for attaching your Little Bull Loader to your John Deere. As always, we appreciate your feedback!
1. Remove the motor mount brackets.
2. Pop the hood and remove the 2 motor mount brackets on each side. Attach the brackets on each side that came with your loader.
3. Take the loader off the pallet. Remove the ratchet strap, unscrew the three screws in the bucket, and tip the loader back towards your tractor.
4. Plug in the color-coded hoses.
5. Start your tractor and lower the hydraulics until the jack touches the ground.
6. Raise the jack to get the top plate over the weight bar. Roll the loader right above that weight bar, and pop it on.
7. Unscrew the jack and remove it for maximum clearance.
8. Take the spring-loaded pins out of their notches (on each side).
9. Attach the motor mount bracket turnbuckle to each side. Tighten until snug, then another two turns. Restart your tractor to make sure your loader is fully operational.

[@jeverhart99]

Gosh these folks seem so nice and enthusiastic, you wanna buy something from them regardless!

[@robertduncan2742]

I bought a loader for my 420 and there help was great.

[@puntagordageorgestratchko8554]

I watched this video several times, ended up buying a little bucket loader from these guys and I have to say it is one darn good tool. I installed on my 738 John Deere in under 3 hours alone. The paint and finish leaves a little to be desired b ut, it is for farm work so it really doesn't matter. well worth the money.

[@LittleBuckLoader]

Hi George, thanks for your comment! I'll send you an email re: a giftcard for you to buy paint to do touchups. Thanks again!

[@bernarddoyle2310]

Please add a video on the removal of the updated Little Bull Loader. I will be doing this by myself. Looks really good!! Thanks!

[@tobrella]

Amazing. I came across your product from a previous customer. Because of your product. I'm almost positive I will be purchasing a 425 JD soon and order this loader from you guys. Thank you so much

[@LittleBuckLoader]

Awesome! Looking forward to it.

[@AirGunnerrr]

That's a Great Video... Thank you for sharing ...... 😎

[@brianphilbrook5262]

Good work guys

[@rogerthomas169]

If I put the little bull or the little buck on my 2023 x734, will I neer to do anything additional to my hydraulics? Can I leave the 60" deck on?

[@LittleBuckLoader]

Both the Buck and Bull are plug and play, as long as your x7 has four quick-connect hydraulic outlets. You can leave on the mowing deck. Thanks!

[@BobbyHeffner-v4j]

You need to put hard lines on loader where you don’t have those long rubber lines on your loaders. Also it would be better to use a bar under the tractor for your main attachment

[@LittleBuckLoader]

Thanks for your feedback -- we really appreciate it!

[@LS1sLegoGarage]

will the little bull loader attach to a 455? i like the load capacity and fitment of the little bull loader more than the little buck, im also just curious as to why the little bull wouldnt be compatible with a 90s 400 series? also i gotta say im very impressed with these loaders! keep it up!!

[@LittleBuckLoader]

Thank you! We have tried the Bull on a 455, but we've run into some fitment issues...definitely a goal, though :-)

[@LS1sLegoGarage]

@@LittleBuckLoader ah ok, definitely excited to see a version that fits it, I know y'all will get it done haha. Where were the fitment issues at specifically?

[@LittleBuckLoader]

@@LS1sLegoGarage Give Steve a call at 815.375.2004 to discuss. Thanks!

[@LS1sLegoGarage]

@@LittleBuckLoader I appreciate it!

[@davidweber1291]

I have a John Deere x758 with a hard cab, will this work without damaging the glass windshield?

[@LittleBuckLoader]

Hard/soft cabs will fit with the Buck, but neither work with the Bull. Let us know of any questions! [e-mail]

[@4labsfarm]

will the Little Bull work with a GX325 or is it too small a tractor?

[@LittleBuckLoader]

Does this have 4 quick-connect hydraulic outlets?

[@leelobdell9305]

R they made just for the x model,,, I have a 400,,, where can I find information about this

[@Dana121234]

What size of tubing are the arms and gauge?

[@LittleBuckLoader]

Check out our website for pricing, specs, etc: www.littlebuckloader.com

[@gundorethemighty]

do yall have a web site to buy one from . I have a 455 john deere . an i wanna get one for mine . but mine is all wheel steer

[@LittleBuckLoader]

AWS is fine! Our Little Buck Loader will work with your 455 -- order online (www.littlebuckloader.com) or call Steve to order over the phone [phone]).

[@romemubarak13]

Can this loader work on a JD LX 277?

[@LittleBuckLoader]

Sorry that the LX models don’t have adequate hydraulics :-(. Here's a list of the models we build for: www.littlebuckloader.com/specs

[@petersterlingkarate]

Will I need to add weight to the rear of my x738 for the Little buck to lift 350 lbs?

[@LittleBuckLoader]

It would definitely be helpful! We sell a weight bar and basket.