Attatching the Quicke Loader in 5 MINUTES! New Q5M | Q Companion |

Attatching our Q5M with Q Companion to our Fendt 516 Vario Profiplus in just 3 minutes!
To all discussions about how easy it is to take off the loader, here is the proof on how easy it is, at least with Quicke.
To thosw of you wondering how the Q-companion, ledlights and all that were connected, it was all in the electric contact on 2:00. The contact goes to the Q Companion screen inside the cab.
Hope you all enjoy!

[@harald_steinberger]

It's definitely faster with the Agrotron 106, because you can also climb out of the cab on the right side: My record is 1:24 minutes. However, I have the MC4 multi-coupler, with which the electronics are coupled at the same time. It's a pity that there are no washers under the screws on such an expensive loader...

[@nibberswagger1443]

Nice fendt

[@jamiekennedy2579]

👍how many bales per year do u make

[@TraktorGutta]

Just past 300 on this farm

[@Teo888N]

Flott video😀

[@alexanderyounger7638]

Where about in norway are you? Where's the nearest town?

[@Chieftain7530]

Great video. Do you ever have any issues with the loader locking on to the brackets? Our John Deere one always seems to need to be pushed against something for the latches to spring into place

[@TraktorGutta]

Thanks! No issues so far, no. What implement do you have on the loader when attatching?

[@Chieftain7530]

@@TraktorGutta Just a pair of pallet forks with a straw bale on them for weight balance. It's on a flat concrete floor too so there's no reason for anything to be out of line. I don't know if grease might help it lock into place or not but that's the only thing I can think of. Thanks for your reply

[@TraktorGutta]

Ok. I see. Don’t think you should need grease. Maybe you should try to tilt the forks forward and drive the tractor forward so that it gets press on the brackets.

[@Chieftain7530]

@@TraktorGutta I see what you mean, push down onto the brackets with the loader to get it to lock it. Thanks for the help

[@ryanwilling6302]

Do you loose 2 rear hydraulic couplings with the loader using the cross gate leaver?

[@zaihami5185]

no they are complitely separate

[@odinrtting4633]

E dennj her videoen filma no? Kor e snøen?

[@TraktorGutta]

Filmet i Juli

[@bones9790]

Va d din impresa i bakrun? Lag vedio på den isåfall🤤

[@TraktorGutta]

WRX STi ja😉

[@bones9790]

TraktorGutta dæven steike den må du lage nakka på kanskje vinterdrift😉

[@gracesebenson5412]

Wilson Mary Harris Kenneth Martin Gary

[@RandalHenry-o1u]

Smith Donna Taylor Christopher Lewis Sarah

[@oljetrynet9334]

Kjem det brøyte videoa snart?

[@TraktorGutta]

Vi får se 😉

[@technoflightmaster8340]

tøft

[@technoflightmaster8340]

hei

[@dylanosullivan4268]

Must be fair soft that ur wearing gloves

[@TraktorGutta]

Haha, why? It is just because i like to keep things clean

[@skakamj0lk]

People will find the most insane things to complain about... Do you feel like a better man pointing this out, Dylan?

[@gijsvermuntagrifotografie]

Dylan O Sullivan i use gloves most of the times too, wouldn’t want to touch anything in my cab with oil or dirty hands..

[@radosawbobinski6049]

👍🇵🇱😉

[@antonyfarming]

Great nice and easy quick too👍👍

[@sloniu76]

👍🏻👍🏻👍🏻

[@deivute735]

I can faster 😁😁

[@olekarlsen8900]

Bra vid 👍🏻av koles man tar på den lasteren kan dere ta vid te våren av at dokk tar den av?😎

[@TraktorGutta]

kzbin.info/www/bejne/nae5hZ2dl9eEp7c