AUDI A3 8P - How To Remove Front Bumper Removal Replacement 2004-2012

Guide on how to remove the complete front bumper assembly from an Audi A3/S3 8P S-Line (Mk2), years 2004 to 2012.
Tools used:
-Impact Driver 3/8”: amzn.to/3bVc4ii
-T25 & T30 Torx: amzn.to/2NWrfON​​​​
-10mm socket & extension: amzn.to/3luPyQv
-------------------------------
www.selectvehiclespares.co.uk
-------------------------------

[@SelectVehicleSpares]

Tools used: -Impact Driver 3/8”: amzn.to/3bVc4ii​ -T25 & T30 Torx: amzn.to/2NWrfON​​​​​ -10mm socket & extension: amzn.to/3luPyQv

[@iamneo1690]

Thanks for the tutorial it's great, can I just ask is there any guides or clips under the light unit that the bumper attaches too? Mines is sagging under the light unit and doesn't look like it was aligned properly.

[@SelectVehicleSpares]

@@iamneo1690 Yes, there is a small guide on the front panel underneath the headlight.

[@iamneo1690]

@@SelectVehicleSpares Thanks a lot, I'm about to do this in the next hour, again great video I watched it several times to familiarise myself with doing it

[@tan_ives]

Brilliant, clear video. If only all how-to clips were this helpful. Many thanks

[@RockDonutGaming-gp2hn]

I just wanted to get some idea of the work involved, cool vid very clear and straightforward… I think I will be paying someone to do it though, bit beyond my capabilities! 🙂

[@jb9652]

Wonderful: Meticulous, Clear and Concise. Thank you!

[@Seether4ever1986]

Nice and easy straight to the subject!

[@nicks2528]

Thank you nicest explanation easiest to follow

[@quattro192]

Do you know what is the part number of the radiator guard? Mine broke, and my bumper is not attached from the bottom

[@nicks2528]

Thank you

[@philipwatts9033]

Parked over a kerb yesterday pulled the bumper brackets out snapped both 10 mm bracket off completely. Day of trying to epoxy the bracket on didn’t work so it’s back on but with no 10mm fixed either side

[@cosmeticcarrepair]

The 10mm bolt is the one I missed. Couldn’t get the bloody thing off 🤣

[@chiccoka]

thx/ mine is fl but iom sure it helps to find them also

[@Igor3D]

Street curb catched my bumper on the left side while I was parked and started going reverse (A3 2010) and I pulled left bumper part off broking most of the holders on that side. Can this be repaired sucessfully, or it is better to replace the whole bumper? There is no visible destruction on bumper surface, but actual holders and other things are looking pretty bad... I want to kick myself in the bu** for not seeying that high profile curb while I was parking.

[@SelectVehicleSpares]

If you still have the broken pieces you may be able to find a bodyshop who can plastic weld them back on. If not then it would be a new bumper.

[@rossworth]

Could you please do a video on how to remove the entire wing mirrors? Not just glass the whole thing, including wiring.

[@SelectVehicleSpares]

Yes, we have a video here: kzbin.info/www/bejne/aouvimWFm7t0p5I

[@rossworth]

@@SelectVehicleSpares thank you!! Didn't realize it would be that much work 😁

[@My_E46_Fam]

what ml are the hex u used???

[@SelectVehicleSpares]

We used a T25 & T30 torx bit. Thanks

[@asrasuleman6691]

How long you took to remove it?

[@SelectVehicleSpares]

It should be around a 20 minute job to do, maybe longer on the first time.

[@AlexPaimus]

How do you put it back?

[@SelectVehicleSpares]

Watch the video in reverse.

[@AlexPaimus]

ahahah. I wish it was that easy. I am trying to put mine back.@@SelectVehicleSpares