AUDI A6 4F 2.7 TDİ 2007 Particle Filter Emergency Regeneration with VCDS cable. dpf clean
Пікірлер: 15
@86aviators3 жыл бұрын
Have Audi A6 4F 2.7 TDI 2009, but the VCDS does not take the code. Do you know any other way how to start the regeneration? Thanks!
@cuneytyakup79402 жыл бұрын
Particle Filter Emergency Regeneration Prerequisites: Ignition ON Engine ON (Idle) Oil Temperature above 70 °C (see MVB 007.2) Particle Filter Load below 68g (see MVB 104.3) If the Particle Filter Load is above 68g the Particle Filter needs to be replaced since the car may burn down when regenerating. Engine Hood CLOSED Parking Brake ENGAGED Transmission in (P)ARK Temperatures at the Exhaust System may rise up to 300 °C!!! No Fault Codes Stored Power Consumers ON (Light, Seat Heating, Front/Rear Window Heater, Climate Control) The Regeneration may take up to 40 minutes, the engine speed automatically increases to about 1500 RPM. [Select] [01 - Engine] [Coding-II - 11] Start Regeneration by Entering 10016. [Do It!] [Meas. Blocks - 08] Select all 3 Groups at once 100, 101 and 102 [Go!] MVB 100.1: Engine Speed MVB 100.3: Regeneration Counter/Timer MVB 100.4: Regeneration Abort recognized (0 = No Abort/1 = Abort recognized) MVB 101.4: Regeneration Status (001 = Heating Up, 010 = Regeneration, 100 = Cooling Down) MVB 102.1: Temperature before Catalyst MVB 102.2: Temperature before Particle Filter [Done, Go Back]
@etosalex53162 жыл бұрын
Manny thanks .
@86aviators2 жыл бұрын
@@cuneytyakup7940 thanks for the answer. I don' t know why, but this is not working with my engine 2.7 TDI (CANA). But I managed to do the regenerations through the Basic Settings Block 226.
@MrDixe Жыл бұрын
@@86aviators how you do It xan you tell me please
@daniels95662 жыл бұрын
My particle filter offset different pressure is 879mbar do i need new pressure sensor?
@cuneytyakup79402 жыл бұрын
Whaaaattt realy? Yes you need new sensor.
@daniels95662 жыл бұрын
@@cuneytyakup7940 Yeah and particle filter different pressure was going in between -43mbar and 21mbar
@kiazakieza3 жыл бұрын
for how long it does this process?
@cuneytyakup79403 жыл бұрын
Max 40 min.
@etosalex53162 жыл бұрын
How end the process??
@moritz1997me2 жыл бұрын
@@etosalex5316 It ends on it self
@etosalex53162 жыл бұрын
And After 40 minutes you just turn off the engine? Or do you need something else? Thank you
@cuneytyakup79402 жыл бұрын
No, we definitely do not turn off the engine, try to drive a little bit about 5 km.
@djjacob1 Жыл бұрын
@@cuneytyakup7940 hi! There is any metod to do this emergency dpf regeneration while driving in this car? (a6 4f 2.7 tdi v6)