If you want to see and learn more: / pssound The Audi A8 system the equipment came out of: • Audi A8 SQ audio upgra... Social: / pssounduk / pssound_uk Website/webshop/contact: www.pssound.co.uk/
Пікірлер: 67
@SHUTDOORproduction2 жыл бұрын
Through my phone it sounds better than any car I've ever heard...
@Clint_L2 жыл бұрын
Very clean as always Peter!!!
@gmcminitruck2 жыл бұрын
Nice work Peter and crew!!
@Jay100kRed2 жыл бұрын
Sounds great even thru the phone and I know it does no justice!!! 💪🏾💪🏾
@proffessasvids2 жыл бұрын
Excellent work guys! Xx
@basstech7142 жыл бұрын
Nice clean install
@kdubbya2 жыл бұрын
Top notch work! Wish they had sold the C7 wagon in the states.
@satindersingh45013 ай бұрын
Sounds so good guys 👌😍
@mattcervantes84762 жыл бұрын
Can never find good sq videos from the US. You guys across the pond love your sq builds. It's all spl here.
@pssound97492 жыл бұрын
Most of caraudio business here is also about streetbass and hairtrick, but we like SQ(L)! 😎
@krowwithakay2 жыл бұрын
I usually try to aim for concert level of volume or as close as I can get without sacrificing SQ
@MrXispas2 жыл бұрын
Hi Peter. Heard about the storm there. Hope you all ok!!! Nice project again!
@pssound97492 жыл бұрын
Yeah, wind is crazy, but we’ll get through it!
@mixxeerr2 жыл бұрын
Sick work as always Peter… I wish I lived in the UK to give you $$$ for an Insignia level build -Isaac
@pssound97492 жыл бұрын
Probably it’s better you’re so far, otherwise you’d get a demo in all of these crazy cars and you’d be ruined! 😂🔊🔊
@chriswray21322 жыл бұрын
What’s coming next ? Lol this is very cool
@chokboywonda2 жыл бұрын
I like the little channel ofr the LED cable
@chrishoareau9742 жыл бұрын
Nice work as always Peter ! What do you think about midrange in kick panel? I really don’t have place and don’t want a 3inch midrange in a pillar or dash. Just to help mirange restitution because my midbass is in oem door placement. Thanks
@carsandstuff711 Жыл бұрын
Great build, love your attention to detail. What did you used for the rca ? Signal for the amp from the factory head unit ?
@gavambler26393 ай бұрын
Lovely install. I’ve got a 63 plate A6 s line avant but can’t seem to find the factory amp. I’m wanting to put an rca converter in so I can have my own amp and sub. Any ideas where I can get this from please?
@umtbozkr2358 Жыл бұрын
Hi Peter, I know that Hertz is not your first choice (except whole while ago in the Honda 2000.3 as front sub), but the ML.3 where quite well received. What’s your opinion on the 1800.3, 700.3 and the 280.3’s. What are specific their shortcomings against by you preferred drivers within a completely well done installation and tuning in your opinion?
@xzszx24 күн бұрын
What would be a good set for Audi a6 c7 sedan. I do all the work myself but i need ideas for amp, and all the speakers and woofers. Budget 800€
@jrwilshire2003 Жыл бұрын
What unit did you use to integrate into the MOST 25 network?
@jusko111 Жыл бұрын
Omg this is whatt I need in my audi 😍😍😍😍
@Minecraft007crave9 ай бұрын
How did you guys install it? I have the factory Bose system and is very lacking, would like to do something similar to this
@patronymic80962 жыл бұрын
Could you make a video going indept of most systems. How it works, how it should be wired etc. Cant find any videos on yt or patreon on this subject, and so few videos online explaining this...
@pssound9749 Жыл бұрын
Hi, When it comes to wiring, what part are you really interested in or need more information about? We have quite few videos showing boot builds, explaining the whole installation process of amplifiers and DSPs. I’ll make a playlist for them, so you can watch all those videos in one list.
@patronymic8096 Жыл бұрын
Thanks alot. Im thinkinh about the Most25 system audi has in alot og their cars. I've done a few builds in audi b8/b8.5 and im now going to build in a c7. But no one has ever told me how the Most/mosfet system works. I was struggeling with integrating a mobridge dsp (used it to connect me to the most system and get analog output from it to the amps) but it had some issues...So maby you could share some knowledge about how the most system works and what to look out for when buying equipment for that kind of use. For my next build i will try the helix converter (seen you use it alot) and hopefully it will run fine with the rest og the system. As i said, i havent found anyone going in dept on forums etc. so if you have the interest and time to teach us about it, im sure alot of us would be greatfull!
@dionwilliams68412 жыл бұрын
Sounds phenomenal! Goodness! What is the song please Peter?
@CasualMenace2 жыл бұрын
SOHN - The Chase
@NXS09 Жыл бұрын
Hello, what speakers did you use instead of the tweeters? What size are the new speakers? Did you have to modify something in that place to insert the speaker?
@pssound9749 Жыл бұрын
We used the HAT L2SE wideband as shown at the end of the video in pictures too. Nothing had to be modified, it just needed a custom mounting frame.
@nitrodreng Жыл бұрын
How much better is it to bring the kickbass out of the doors? Are ALL doors rattle prone? If you deaden everything in a BMW door, will it not be rattle free?
@pssound9749 Жыл бұрын
No door is rattle free. Always compare the installation to a home audio cabinet, some of which also have matrix bracing or aluminium core structure, which is rattle free. Now think about a car door again…
@nitrodreng Жыл бұрын
@@pssound9749 im binge watching your videos and learning so much. Next car i will try to build speakers into the kicks
@jeterplaysshort2 жыл бұрын
Pete you know I'm a fan of your work did you run into a time crunch on the amp rack? Cable management is the difference in this being a "six" and a "century " on this build.
@pssound97492 жыл бұрын
You know it’s a bit like having your favourite meal cooked by grandma on Sunday! You can always rely on her that you’ll be well fed and you’ll lick all ten of your fingers. Her presentation is not like a Michelin star chef’s, but you don’t pay for that, you just want the awesome taste in your mouth. Same is happening here. This wiring is not for competition highest levels, it won’t win a beauty contest, but it’s honest. Connections are properly terminated, ferrules used all around, small connectors soldered and protected. There’s nothing to be ashamed for. This build already had many many extra hours put into even if the customer couldn’t afford it. When they can afford to have fancy wiring, then we’ll do it, but till then we rather focus on what makes a system sound better and that’s where we put more effort, because at the end of the day you want have ear 👂 orgasm. 💪🔊🔊
@jeterplaysshort2 жыл бұрын
@@pssound9749 touche, Pete well said ...rook takes queen
@murdamechanik2 жыл бұрын
Hi Peter I’m trying to find a good 3 way system for my truck. What is a recommended set under $1000?
@pssound97492 жыл бұрын
I can never suggest anything like this as i always look at the installation first, what locations and applications can be used.
@murdamechanik2 жыл бұрын
@@pssound9749 I should have asked instead what are your trusted brands. My apologies
@matthewp97192 жыл бұрын
What are the rms ratings on the sub and speakers?
@ekimandersom44782 жыл бұрын
Irrelevant
@cantugbenli9 ай бұрын
Hello I own Helix Q10 Woofer. I want to use it in a closed box. How many liters should the box be?
@pssound97499 ай бұрын
Min 17-18L for tighter bass or 25-30L for better low extension.
@cantugbenli9 ай бұрын
Which one is best for sql system? Car is Opel Astra 2023. I will use q10 with helix p two amp. Thanks for answer❤
@AudioEuphoria0802 жыл бұрын
Big question. How do you use the stock head unit for builds like this?
@AudioEuphoria0802 жыл бұрын
Or did you?
@pssound97492 жыл бұрын
In this one we had to use the speaker levels first, which are not great, but prepared the car for MOST25 integration. You need to get the HU coded for hifi, so it outputs signal on the fibre optic too, then use something like an Audison Bit DMI or Helix SDMI25 and you can also get clean, optical signal from the HU.
@AudioEuphoria0802 жыл бұрын
@@pssound9749 that went right over my head but thanks for the info!
@pssound97492 жыл бұрын
@@AudioEuphoria080 check out those products and it may all become clearer. 😉
@AudioEuphoria0802 жыл бұрын
@@pssound9749 bet ill check them out thanks
@odin60422 жыл бұрын
possible to get same box ordered?
@pssound97492 жыл бұрын
This was built to size according to the owner’s request. If you give us exact dimensions, then we can build anything, but shipment maybe interesting depending on your location.
@cidfabianorodriguesdeazere80842 жыл бұрын
Qual modelo desse subwoofer
@pssound97492 жыл бұрын
Helix Q10W
@sandwichburger48562 жыл бұрын
I love you peter give me a baby Its pretty danm good man ! Like usualyy ; every car have their own signature even it mount and EQ by you , its pretty
@leebuxton42722 жыл бұрын
This is the same as my car. Does the standard cd player work still? Did I miss that bit? Also how did you get the amp to run through the audi system?
@pssound97492 жыл бұрын
You need MOST25 integration, so you get optical signal out of the HU, then you can run that into the DSP.
@leebuxton42722 жыл бұрын
@@pssound9749 ah Brill. Cheers. Hopefully put an install in mine this year :) thanks for info
@leebuxton42722 жыл бұрын
I'm pulling my hair out here.. what's the song called please?
@pssound97492 жыл бұрын
@@leebuxton4272 Sohn - The Chase Download Shazam and you’ll find every song with it! 💪
@sudorelabs49012 жыл бұрын
Cost?
@pssound97492 жыл бұрын
Equipment was supplied, so all second hand. Installation was 75hours + material cost, which differs in each country. If you want us to build a system for you, then drop us an email with your phone number and we can lease that way.
@sudorelabs49012 жыл бұрын
@@pssound9749 Everyone - he is avoiding the question. Why? Why cant he just say how much he charged the client....? transparency is a key element in regards YoutTube
@jeterplaysshort2 жыл бұрын
@@sudorelabs4901 because that's not good buisnees, It's between him and the client....loose lips sink ships!
@ekimandersom44782 жыл бұрын
@@sudorelabs4901 Because nobody gives a price on youtube . Why should he? MY rate would be 100€ per hour so 7500€ + material cost.