Audi B9 S4 Ethanol Sensor & P3 Gauge Install

As per the norm with all of my builds, the first modification I do is installing an ethanol sensor so that I can start blending E85 into my pump gas to make more power. I'm back at Reiter Performance where Kyle installs my ethanol sensor, an analog boost line, as well as a beautiful P3 gauge so that I can read my ethanol content as well as other important data at all times.
For more information on this P3 gauge as well as the instructions on how to set it up, check out their website: www.p3gauges.com/v3-install/
All hardware installations are performed by Reiter Performance. For more information on their services please reach them at [e-mail] or check out www.reiterperformance.com for more details
All dyno testing is performed at Racing Greed located at 1650 Broadway St Unit 110, Port Coquitlam, BC V3C 6P8. They can be reached at [e-mail] or check out www.racinggreed.com for more details.
For any business inquiries please email me at [e-mail]
Website: vancityaudi.com/
Instagram: / vancityaudi
Facebook: / vancity.audi.1
#P3 #Ethanol #Gauge

[@bagelbandit6076]

I’ve been away for a bit? Love the new intro. Congrats on the sponsor. Love to see enthusiasts being supported.

[@VancityAudi]

Thanks! I had a bunch of personal stuff to tend to so this is the first video in a month 😭 Longest I've ever gone without releasing a video

[@GoFastR7.5]

This channel is my dream Audi channel

[@VancityAudi]

Thanks for watching!

[@ElDemon_Ll]

Thank you for sharing the knowledge with us 🔥🙏🏻

[@VancityAudi]

No problem

[@justboosted0398]

I need to get one fo those for my car!! Love the video and can’t wait to see what you do next keep it up!

[@VancityAudi]

Will do! Thanks for watching

[@justboosted0398]

@@VancityAudi hey did you have to tune the car right after you installed the sensor to run e85 or could you do it without the tune?

[@VancityAudi]

@@justboosted0398 as I mention in the video I blend additional ethanol in at every power level: stock, Stage 1, stage 2.

[@justboosted0398]

@@VancityAudi oh ok I see what you mean! Thank you! Idk how I missed that 😅

[@VancityAudi]

@@justboosted0398 all good. Thanks for watching

[@RSPerformance-RS3EVO]

Badass car brotha

[@VancityAudi]

Thanks!

[@LastHumansGarage]

definite interest.. i want that gauge, and ive had it on 2-3 previous cars.. but almost $500.... sigh...

[@4TKRACE]

wazzaaap Adam! we decided to buy tte777 instead of GC ^^ W8ting for u to ramp up dat 3.0T!

[@VancityAudi]

Congrats!!! That was a great choice. I can't wait to see what this baby can do too.

[@jcook0310]

Do you know the gauge wire he used for the ethanol sensor, by chance?

[@CHRIS-qm7ke]

Hey man...love the channel! Been following u for a while. I also have a b9 s4. I am doing the same thing as you in this video, however I want to finalize the analog boost tap at the same time as the p3 gauge, analog sensor & ethanol sensor. But I'm having a hard time finding a boost tap to work for a b9 s4. Did u not finish tapping it because u can't find the appropriate tap? Or where can I find a tap & where exactly do u tap it? I also plan on running water/meth...idk if that makes a difference with the tap? Any info would be helpful! Thanx!

[@VancityAudi]

We already have a plan on where we'll be installing a boost tap but each performance upgrade is documented and shown one step at a time. So in an upcoming video I'll be going through that in detail.

[@lilspartan192]

Did you not need to tap into a ground a chassis ground?

[@curtdragon]

One mod and as fast as the B8 now lol. I wish more people made a bracket like that for the B8/8.5. Jealous of the B9 though! Looking forward to seeing the progress

[@VancityAudi]

Lol, it's gonna take me a long ass time to make my B9 as quick and as fast as my B8 was.

[@curtdragon]

@@VancityAudi I dunno. Full E85 puts it pretty close. Add a down pipe, intake and you’re pretty much there

[@VancityAudi]

@@curtdragon I disagree. There are only a few B9 S4's in the world that have run 10's with a stock turbo thus far.

[@curtdragon]

@@VancityAudi oh I get that but I’m saying you partially stripped the car didn’t you? The B9 E85 runs very close to what a FBO B8.5 does from what I’ve seen. Or maybe I was looking at hybrid? Lol it’s been a while since I did as I’ve shifted the plans to just get a TTRS

[@curtdragon]

@@VancityAudi Either way it will be very quick for way less mods. Ethanol gauge and tune and you’re very close to the B8

[@keeper2874]

Still trying to figure out where you are powering the ethanol sensor from?

[@VancityAudi]

Here is a diagram from the P3 Gauges website which might provide some more clarity: www.p3cars.com/accessories/p3-ethanol-sensor-voltage-adaptor/

[@darkstar9008]

Hey where did you pick up the P3 gauge?? Looking for one on my B8

[@VancityAudi]

From P3 lol. www.p3cars.com/audi/p3-v3-obd2-audi-b8-gauge-2008-2016/

[@darkstar9008]

@@VancityAudi oh lmao. I thought you had picked it up from another third party like ECS or another shop 😅 thanks!

[@VancityAudi]

@@darkstar9008 no, I always try and buy direct. I'm not a fan of buying from 3rd parties if I don't have to.

[@desyor]

Wondering what the little pieces are that go on the ethanol senor that the quick connects plug in to?

[@VancityAudi]

They should come with the quick connect fittings. 3/8ths are what the fuel lines are.

[@desyor]

@@VancityAudi Sweet thank you! Any way you can link me to the bracket or the 3D print file?

[@VancityAudi]

@@desyor if Reiter Performance has some made, I'll send you a link to my website to buy one. I'm just waiting to hear back from him.

[@desyor]

@@VancityAudi thank you! I appreciate it!

[@VancityAudi]

@@desyor turns out I do have some in stock. Use this link to purchase: vancityaudi.com/shop-till-you-drop/ols/products/30t-ethanol-sensor-mount-black-finish Try and make a note for me when you order off my website or send me a separate email after you place the order, to let me know it's the B9 mount you want and not the B8/8.5 mount. Thank you.

[@navarrablues4]

doesn't p3 read boost with out a tap?

[@VancityAudi]

Yes, I explain that in the video

[@packat78]

Aren’t you worried about grease getting into your fuel line? Haha 😂

[@a.khojah4968]

What about tte855

[@VancityAudi]

What about it?