Audi S-Tronic 7-speed DL382 Gearbox Oil Change using VCDS. 0CK, 0CJ, 0CL, 0DN, 0DP Dual Clutch

[@davesterl]

All proceeds from the shop goes to Poppy. Find the items that are used on the Dave Sterl channel in the Amazon shop. www.amazon.co.uk/shop/davesterl

[@bapsmcginty4782]

Dave, can you say who supplied your Rotary lift?

[@jasondaly9172]

Hi Dave, does deactivating the accumulator stop the pump or did you turn off pump ? p/s I'm using VCDS.

[@OpenYoutEyes-m1c]

I have seen several of these for this service, and yours is more than just the best. It is on a whole other level.

[@hugoboss8889]

Nice job.

[@JanBan-q6t]

Hello, Thank you for a very good and precise explanation. I looked at several videos and nowhere is it described so well and in detail. Best regards from Slovenija

[@gregorytolson1648]

Just completed this job with you guiding me through. Was super nervous undertaking it but I replicated the exact same results as you and it only took me 3 hours!

[@DreammoreRealty]

Hi I have a 2019 Audi A6, Where can I find the service manual? and what computer do you recommend that has this option? Thank you

[@BIE-bi3rb]

Great video Dave. Crazy that the filters aren't easily accessible. Looks like you have been shopping in Nisbets. I have one of those folding catering trolleys and find it very handy.

[@brw2110]

I have a feeling that's an extra pump you run with vcds. You can hear it spinning up to 3000 rpm and when at 600 rpm the readings still show 3000. Could be a slight difference in the level vs just the engine running. Maybe worth testing if an extra drop come out when you turn that one off. Thanks for the video, got mine sorted this week.

[@kerbioa]

Outstanding!!!

[@turnerjuices]

Thank you for the video. I've just done 2 of these in a row today. Cheers

[@K_______R_1999]

I want to change the MTF oil. Do I need Vcds for that?

[@gregorytolson1648]

I have the same Audi manual as you, that green cavity I think is where the S-Tronic transmission fluid is housed. That is the fluid that’s on a 40,000 mile schedule. Makes sense since the green area affects the rear drive shaft. All you changed is the fluid that affects the front wheel drive aspect of the Quattro system

[@davesterl]

This fluid change is for the automated gear change aspect of the dsg regardless of 2 wheel drive or 4 wheel drive. There is no rear drive shaft on this car as it it front wheel drive only.

[@gregorytolson1648]

@@davesterlI’m pretty sure the MTF is considered as the S tronic fluid. The manual says you remove the mtf pump (4 bolts). Let it drain, and then fill from plug number 3 from your diagram.

[@davesterl]

@@gregorytolson1648 nope, the manual transmission fluid(MTF) is not the s-tonic automatic transmission fluid(ATF). I explain this in the video.

[@gregorytolson1648]

@@davesterlis it just fluid for the mechatronic unit? Doesn’t touch the gears?

[@fautomoto]

be very careful if youre doing this yourself. The portion he just changed is the ATF cavity portion (should be blue in the diagram if you have one) that houses the mechatronics and clutches. (the green portion in the diagram) is the MTF cavity where it houses the gearsets and center diff. Dont confuse the two.

[@johnnyfortube]

Great to hear a local accent

[@abishkarthi]

Where can i get this procedure paper????

[@geoffreyedmundson9928]

Dave great video, do you ever change the MTF fluid on these gearbox's

[@mightymoe4635]

Thanks for the great video Dave! I have a 2018 Audi Q5 with the same gearbox and your video made things a lot easier! Have you done a service on the transfer case fluid & rear differential for these cars yet? Looking forward to more great videos! Thanks!

[@colinreid7305]

Great video. German engineering doing what they do best, over engineering to the max

[@ag-automatic5929]

Great video. Just one question how often need to change filters. I bought a full kit that includes 3 filters. At the moment car has 36000 miles

[@patrickbrennan4892]

Where would you recommend purchasing the dongle for VCDS and what type?

[@KygoNky]

hi, can i get a pdf with that instructions for dl382?

[@jerryfelix2530]

Where can I get a copy of the instructions like the one you are using on the video.

[@gregorytolson1648]

You in the US?

[@tannerfoster7466]

Any update here? In the US

[@Thebogetina]

Hello, In my country servicers told me only to change ATF oil for my s tronic and all mehanics told me that there is not another oil in my s tronic to change. Is there MTF in every s tronic because my car is audi a4 2017 and i would be happy to change it if is it possible

[@masoudamini2477]

Hello my friend, thanks for your all help in this video, can you let me know what is your website or diagnostic tools you use? Thanks 😊

[@-DC-]

Only the Germans could overcomplicate a Transmission to this level 🤣

[@justinramalingum]

🤣🤣

[@busterruff9369]

I have just had my gear box oil changed on mine ,it’s exactly the same car as that Audi , I was charged £365 is that about the right price ? Thanks in advance for any reply,

[@dugahole55]

great video and detail, follows Audi manual very acturately. The only thing I have trouble with is opening the control plug to let out the overflow when at tempature. The accumalator is still active, shouldn't it have been turned off, or activated to the drain procedure?

[@davesterl]

As stated in the video, do not run engine with accumulator disabled

[@eriick80]

Is the same transmission in a 2018 q5 ?

[@RawQuattroRacing]

Thanks for the grate tutorial 👍 , i am about to do a oil change in the near future. Do you have the paper manual to share?

[@Wolfman140]

Thank you! I'm going to call around to get some quotes to do this but if its stupid expensive I'll do it myself with OBD11 (I checked and saw the oil pressure emptying option in Adaptations). Dumb question because I don't know what the inner workings are: Why is OK to level off the system while it's pressurized? Must be the design of the system that it wouldn't flow excessive amounts back out of the fill bung (and leave the proper 3 L inside)?

[@davesterl]

@@Wolfman140 it's the accumulater that is pressurised. If the sump had that pressure, it would blow those plastic plugs out.

[@Wolfman140]

@@davesterl Thank you!

[@kerbioa]

I need to do this service. Can OBDeleven be utilized for the VCDS transmission command steps?

[@kkoeppern609]

Do you check the oil level while the engine is running?

[@zizi12321]

Hi Dave, Great video! Is it possible to share the Instructions manual somehow? Thanks

[@dragoljubdumitraskovic7246]

Hello, I did the same procedure as in this video but with obd11. Exactly 2.8l came out of the gearbox. I put in 3.5 liters of new oil, but in the end, after the procedure, it ended up with 2.8 liters in the gearbox. My gearbox threw out 0.7l at a temperature of 35c. I measured everything correctly. Is that a problem now? Should i add another 0.3l of oil? I looked at a couple of clips and everyone had 3.1l left after the 3.5l refill. Thank you very much in advance...

[@davesterl]

So 2.8 came out and 2.8 went in. Sounds ok

[@dragoljubdumitraskovic7246]

@@davesterl Ok, hope so :)

[@mobilrz]

What's your recommendation Dave for Tiptronic 8-Speed? Dealer who sold me the car said leave it. Its a ZF gearbox and sealed for life, but I know ZF do a refresh kit including, oil, etc. It's a quattro too.

[@mohitl1697]

zf reccomend every 8 years / 50k miles if you look on their website

[@mobilrz]

@@mohitl1697 Thank you.

[@fpower3425]

Hi Dave, first of all thanks a lot for the extensive video!! I HAVE A QUESTION: when you shift through the gears, do you also shift through the manual gears? So P, R, N, D, S and manual 1 till 7? And how many cycles did you do? Thanks in advance for your answer!

[@brw2110]

I would like to know also. I guess just put it in D.

[@garthschutte9190]

Great video, thanks

[@patrickbrennan4892]

Can you turn off the accumulator using a handheld OBD scanner?

[@MaxMoment2023]

Great video. Presumably the engine is running when you are cycling and holding the gears after the fill? Stupid question - but it’s not clear to me. Thanks

[@fpower3425]

yes, the engine is running when he is shifting and holding the gears. He also states at 25:11 that the shifting of the gears will assist in raising of the "ATF-temperature"

[@KeronCyrillo]

Where can i get this print out ?

[@yaemish]

This video was great! I just bought a b9.5 and will be doing this soon. I have a question. You got about 3 liters out and aren't supposed to fill it with more than 3.5 liters; how come you aren't worried about .5 liters still being in there? Are you risking overfilling it to 4 liters?

[@davesterl]

@@yaemish I think you need to watch the video again

[@Juhannussima]

Every time you change dsg oil you are supposed to drain the excess oil out. As you can see in the video he takes the filling tube off and there is some oil coming out as well. I'd say 0,2-0,4 litres. The oil level is correct when the oil is lightly flowing out of the filling plug when the oil temperature is between 35 and 45.

[@brauliomorales5518]

excelente faltó el cambio de filtros y el otro aceite pero perfecto

[@micalsmith673]

Is the MTF side of the box serviceable?

[@oneeetwooooothreeee]

I visited the offical Audi service few months ago to do a 7 speed s tronic transmission service (oil and filter) for a4 b9 2016. and they replaced the oil. I asked if filter is replaced and they told me that it is not needed. Is this correct, and what should i do? Btw. everything works fine in this moment with the transmission.

[@audi_race_club8612]

Yes Thats all Right, Elsa says „It’s not needed to change“

[@myyoutubestudio3914]

my mechanic’s apprentice drained the gearbox oil instead of engine oil. they never depressurised the system. just added brand new oil. its driving perfectly fine, do you think i will have problems down the line? Thanks

[@sylvainst-laurent3631]

No . I called Audi about this and if your transmission is cold you can open it normally

[@myyoutubestudio3914]

@@sylvainst-laurent3631 Thank you so much

[@СашаШвець-ш5е]

cool video ! thanks

[@guojia6720]

Is there an alternative to G055549A2? would 75W90 Gear oil GL4 rated work?

[@davesterl]

@@guojia6720 are you being serious?

[@guojia6720]

@@davesterl My mistake, what I meant to ask is, can MTF oil be replaced with GL-4 gear oil?

[@Hysejn]

Do you know if those 3 filters on the macatronic have to replaced at some time or there's no interval on them.

[@davesterl]

What did i say in the video?

[@Hysejn]

@davesterl sorry I did not catch that. Would you be kind and tell me here?

[@florindanila7034]

Bro nice video but what about those oily gloves on the client's gear knob? That would make me a unhappy customer.

[@davesterl]

Wise up

[@jonathanfrayre1]

Is this oil good for this too G055529A2??? 2017 Audi A4

[@sylvainst-laurent3631]

Yes

[@b4tm4nrubin33]

I have an Audi a6 2007 with automatic transmission and it has leaked a bit of transmission fluid from it. It had a change in summer 2022, am I able to top it up if I take off the fill plug?

[@chadcarmedy2232]

You’ll drain it if it’s an S tronic like in the video, however if you catch the fluid in a clean container and have a fluid pump like in the video you could top the gearbox up. However it’s pointless topping something up for it to leak out again if the leak hasn’t been repaired.

[@b4tm4nrubin33]

@@chadcarmedy2232 I know what you mean. It’s a very very small leak which I’m investigating, but want a method to use as stop gap so I can continue diving the car before getting it fixed properly if I can

[@bapsmcginty4782]

Dave, can you say who supplied your Rotary lift? Not a stalker, honest😂. I know i have asked this on a few of your videos.

[@davesterl]

You need to Google for a distributor near you

[@bapsmcginty4782]

@@davesterl I have done Dave but with no success. I know you are not sponsored by whoever supplied yours, just looking a steer.

[@sylvainst-laurent3631]

​@bi suggest buying a used one . That's what i did apsmcginty4782

[@bapsmcginty4782]

@@sylvainst-laurent3631 Got a used Bradbury 4 post instead from a garage closing in Wolverhampton. Got wheel free so delighted.

[@SenanMcMenamin]

Do you have a contact number I’d like to get my gearbox serviced

[@sylvainst-laurent3631]

To anyone watching this wondering if you need to disable the valve thing , the answer is NO . Hell even Audi mechanics never heard of this . I changed it on mine using the same procedures as any other transmission and it worked fine .

[@davesterl]

@@sylvainst-laurent3631 'valve thing',????? Do you not see the official Audi procedure shown in this video????? If you do not disable it, you don't get all the oil out. Ballbag

[@ricidrumbajs5182]

Unnecessary work when the filter does not change

[@davesterl]

@@ricidrumbajs5182 don't do it then

[@maciejkazmierczak6781]

you only changed half of the oil, you want to do it correctly, you should remove the entire mechatronics and replace 3 filters, all seals, etc. I will add that in the gearbox there are two types of oils and two separate oil circuits !!!

[@davesterl]

@@maciejkazmierczak6781 in this video, we follow the manufacturers instruction and 3 filters and 2 oil cavities are clearly explained in the video. Perhaps you missed all that

[@mariuspetre6033]

​@davester salut trebuie ulei original sau pot pune ravanol atât MTF cât și atf mulțumesc pe care ziceți dv că ar fi ok

[@artemno8667]

adaptation gearbox?

[@Matt-rk3de]

Bump. I can’t find anyone who has posted how to do the adaptation.

[@artemno8667]

@@Matt-rk3de The principle of adaptation, plus or minus, is the same as on the DL501, but there are fewer functions for 382 in VСDS. There is no reset to basic settings (only a general reset, which turns the gearbox into a brick), no adaptation of the clutch itself. Only reset start/stop values, reset pump adaptation and a couple more functions that are not related to clutch adaptation, for example.

[@Matt-rk3de]

@@artemno8667 yup! That’s all I was able to see, too. Thanks for note about bricking the trans. I kinda want to try just the first 3 steps : 1.) Erase counter for start and stop processes. 2.)Clutch valve calibration 3.) Distance sensor calibration But I feel the ‘clutch engagement point adaptation’ is needed after that..

[@artemno8667]

@@Matt-rk3de Yes, I’m also interested in the clutch, because... For me it slips sometimes. But there is no adaptation function. But after those adaptations were made, the car behaved perfectly for a short time. Only ODIS does normal adaptation.

[@Matt-rk3de]

@@artemno8667 cool man. I’ll keep you posted if I get any new information. I feel like more people will have the same questions, as these cars get on in age.

[@ВадимБаширов-б4г]

Ты по русский говорил бы былобы отлично