Audi TT 8J white instrument cluster upgrade by turning off immobiliser (Immo off)

  Рет қаралды 26,228

IanPG

IanPG

Күн бұрын

Пікірлер: 133
@Ujko96
@Ujko96 Жыл бұрын
Dude, i love your work all your videos, it is funny that we both have same issues on TT. :D You helped me to fix everything what I was facing. Keep going.
@ianpgonzaga
@ianpgonzaga Жыл бұрын
Glad I can help you Ujko96 !!
@j-chip-vag7411
@j-chip-vag7411 3 жыл бұрын
Cool! But no need to do immo off, you just need to read immdata from both clusters and swap pin, cs, mac, etc. u can do it by obd2 and avdi/vvdi2.
@ianpgonzaga
@ianpgonzaga 3 жыл бұрын
Yes that is the other way which I refer to but do not detail :) I will try and make this video another time.
@tonybig78
@tonybig78 3 жыл бұрын
Exactly mate this guy maybe doesn’t know how or have avdi to do it.
@keanu5096
@keanu5096 9 ай бұрын
wdym by ‚swap pin, cs, mac, etc.‘ ?
@nbktruth
@nbktruth 2 жыл бұрын
Do I need to worry about the Immobiliser if I am simply changing the LCD panel in the existing cluster? I have a red L:CD on my mk2 that has started to fail. I've bought a scrap cluster which I will remove the LCD from and put it into my existing cluster. The replacement LCD panel is also red so I think it should just be a case of removing the existing cluster, opening it up and swapping out the broken LCD for the replacement LCD and putting it back in.
@ianpgonzaga
@ianpgonzaga 2 жыл бұрын
Hey Ross No need to worry about immobiliser data in your case :). Just he careful when replacing the needles. They can be finicky. Make sure the rear of the motor is pressed onto something hard like a glass surface.
@A-DUBCLUB
@A-DUBCLUB 6 ай бұрын
Hey ian. I have a 2004 S4 B6 RB4 cluster that i would like to have work in my 2002 A4 B6. Can you get it to work? How do i contact you. I believe spoken to you before but i lost your details and have been scrolling thru many videos to find ya again
@ianpgonzaga
@ianpgonzaga 6 ай бұрын
Hey I think you did find me LOL.
@angelyakko731
@angelyakko731 Жыл бұрын
Merci pour la vidéo mais de nos jours il y a peut-être mieux pour mettre antidemarrage en immo off sur une TT mk1 ?
@MoniandFredsillyrianGaming
@MoniandFredsillyrianGaming 4 жыл бұрын
This guy is a genius
@ianpgonzaga
@ianpgonzaga 4 жыл бұрын
Angry Babaa thank you. Haha. Remember I broke something first 😭
@Smith6265
@Smith6265 3 жыл бұрын
@@ianpgonzaga Hello If I swap my cluster over with a new one,Will I need to program anything?
@ianpgonzaga
@ianpgonzaga 3 жыл бұрын
@@Smith6265 hello. Yes you cannot just plug and play. Either immo off or you can recode the cluster.
@Smith6265
@Smith6265 3 жыл бұрын
@@ianpgonzaga Thank you,what’s my best option !! to take it into a garage and let them do it!!!
@ianpgonzaga
@ianpgonzaga 3 жыл бұрын
@@Smith6265 yeah talk to your garage and if they have experience in immobiliser 4 they can help. If not ask them for automotive locksmith. They’re the next best bet.
@skizGG
@skizGG 2 жыл бұрын
Hello there! Do you think this process would work on a 2009 Audi A4 B8? I have the red lcd currently and I'm interested in updating it to the white one. Thank in advance!
@ianpgonzaga
@ianpgonzaga 2 жыл бұрын
Yeah should do.
@wraith5112
@wraith5112 2 жыл бұрын
Hi Ian, i bought an Auction 2016 Audi S3 8v with a missing cluster. It had a virtual cockpit. I have fitted a replacement used VC but it needs online programming. How do I bypass the immobiliser to start and at least move the car out of the way.
@ianpgonzaga
@ianpgonzaga 2 жыл бұрын
Hi Wraith. You will need to find someone with something like Abrites (auto locksmith hardware) to help you.
@danieltoussaint289
@danieltoussaint289 2 ай бұрын
How did you do the coding, i want to change my cluster to the color display but i don’t know how to do the coding with my OBD11, any tips?
@ianpgonzaga
@ianpgonzaga 2 ай бұрын
@@danieltoussaint289 to upgrade it to color is with a non Audi kit. More news on that coming soon. To do coding so you "dumb down" the cluster to remove comfort functions - you can do via coding of module 17 - instruments.
@danieltoussaint289
@danieltoussaint289 2 ай бұрын
@@ianpgonzaga i don’t know how to do coding.
@ianpgonzaga
@ianpgonzaga 2 ай бұрын
@@danieltoussaint289 ohhhh ok. Did you have the hardware to change coding and adaptations on you?
@danieltoussaint289
@danieltoussaint289 2 ай бұрын
@@ianpgonzaga i have obd 11
@ianpgonzaga
@ianpgonzaga 2 ай бұрын
@@danieltoussaint289 no that won't do it.
@yucelkurtoglu4420
@yucelkurtoglu4420 Жыл бұрын
Hello. I changed the indicator on my 2008 a3 vehicle. I transferred all the km immo information to the new indicator, but I am getting ABS warning with the new indicator and I cannot clear the fault. Can you help me on what to do??
@ianpgonzaga
@ianpgonzaga Жыл бұрын
Probably plug your old cluster in. Get the abs coding. And put it into the new one. It's probably different. :)
@yucelkurtoglu4420
@yucelkurtoglu4420 Жыл бұрын
@@ianpgonzaga My old indicator is broken and does not work at all. What to do in this case?
@yucelkurtoglu4420
@yucelkurtoglu4420 Жыл бұрын
@@ianpgonzaga ???
@ianpgonzaga
@ianpgonzaga Жыл бұрын
@@yucelkurtoglu4420 did you change it for another unit?
@yucelkurtoglu4420
@yucelkurtoglu4420 Жыл бұрын
@@ianpgonzaga Indicator changed ABS computer did not change ABS computer needs to be recoded, but the old Indicator is completely broken, so I can't get the information from it, so I don't know how to code it.
@thomascottereau-6073
@thomascottereau-6073 Жыл бұрын
Hello, how do you solved the esp fault after the swap? I have clear the code but traction control et mag ride suspension are coming back every time. Thanks !
@ianpgonzaga
@ianpgonzaga Жыл бұрын
You need to check your coding and turn off magride :)
@thomascottereau-6073
@thomascottereau-6073 Жыл бұрын
Thanks, do you have the details on the coding part? Thanks
@ianpgonzaga
@ianpgonzaga Жыл бұрын
@@thomascottereau-6073 hi. If you plug your original back. Copy the coding. Put that into your replacement. You should be OK 😉
@thomascottereau-6073
@thomascottereau-6073 Жыл бұрын
Thanks Ian, I have also put back the original cluster and esp fault is still there…do I have to re-initiate some sensors? For the mag ride I have seen your video, I will think about it 😊
@thomascottereau-6073
@thomascottereau-6073 Жыл бұрын
Do I have to copy it with vcds, do you have made a tuto on it ?
@erikfossum3293
@erikfossum3293 Жыл бұрын
I have a 2001 vw mark 4 with emmo off on my ecu and my current instrument cluster is failing can I use another one same but a letter off on part #
@ianpgonzaga
@ianpgonzaga Жыл бұрын
Should work ok.
@bloolouis
@bloolouis 6 ай бұрын
Where did you get the new eeprom file that you wrote back to the ecu?
@ianpgonzaga
@ianpgonzaga 6 ай бұрын
Had some help from online contacts who also do cluster mods.
@jonathansousa5406
@jonathansousa5406 Жыл бұрын
Hi! I saw that you have a difference between the two clusters for the level of gas in the car, do you know if there any calibration possible for the gauge? Also have this pb on my s3 8p
@ianpgonzaga
@ianpgonzaga Жыл бұрын
Hey Jonathan. There is a calibration using VCDS where you can choose between AWD and FWD.
@PetarFantastic
@PetarFantastic 4 жыл бұрын
Hey, i have old style red cluster and no option to program needle sweep. Did you have it( is your cluster newer than mine,but still “old style”) or you made it do sweep? 🤗🤗
@ianpgonzaga
@ianpgonzaga 4 жыл бұрын
BlowYourShot the modification is done “the long way” - option two of making white screen upgrade. It’s a software change.
@PetarFantastic
@PetarFantastic 4 жыл бұрын
@@ianpgonzaga is it doable by me? 😂
@ianpgonzaga
@ianpgonzaga 4 жыл бұрын
BlowYourShot of course ;). It is doable by anyone but the tools are different and you must be confident in opening the cluster, then you need to make both hardware and software modifications.
@PetarFantastic
@PetarFantastic 4 жыл бұрын
@@ianpgonzaga I would be confident if I had a forum post or video as a guide :D :D if you know what I mean :P Just subed you with my 2nd chanel, BtwWtf, there I made some vids for TT as well :D Best regards
@ianpgonzaga
@ianpgonzaga 4 жыл бұрын
BlowYourShot I will try to make this video in the future (but it is much more difficult).
@alimakeshift
@alimakeshift 3 жыл бұрын
Hi I am just doing a bit of digging. Will i be able to fit an Audi tt mk3 digital cluster into a audi tt mk2. Just been looking on forums to find the answer
@ianpgonzaga
@ianpgonzaga 3 жыл бұрын
No the mk3 has a different kind of high speed data system that’s not in the Mk2.
@JuniorSantos-ui9xv
@JuniorSantos-ui9xv Жыл бұрын
when you change the panel! Does the km change too or does it always stay the same?
@ianpgonzaga
@ianpgonzaga Жыл бұрын
Good question. The km is coded with the cluster. So if you get a 2nd hand one it will have a KM reading on the odometer already which sticks. It doesn't automatically change to what your car originally had and needs to be adjusted to match.
@αισχοςντροπη
@αισχοςντροπη 2 жыл бұрын
Hello ian. Do you know if the screen can be burned or just the led behind it fails? Thank you
@ianpgonzaga
@ianpgonzaga 2 жыл бұрын
Most likely the led's behind have failed. You can go in there and replace the led's.
@maurojacob5122
@maurojacob5122 3 жыл бұрын
I have a TT mk2 2006 I need a second key in a keyhouse...now car don't star with the old and new ... Car is safe immo can you help me???
@ianpgonzaga
@ianpgonzaga 3 жыл бұрын
your car should start when you use all original parts to the car. including original instrument cluster and original key
@Donkeyflup
@Donkeyflup 4 ай бұрын
Similar situation : Audi TT mk2 Original cluster failed. Unable to retrieve SKC. Bought cluster from a scrapyard including ECU. Did immobiliser delete on the scrap ecu. With immobiliser deleted ecu and replacement cluster the car starts and runs... however.. The replacement cluster shows SAFE and I'm unable to use the remote keys to lock/unlock and also while in the car I am unable to operate any electric windows. All other functions appear to work except: - electric windows and the locking/unlocking via key fob. Please help 😅
@Donkeyflup
@Donkeyflup 4 ай бұрын
​@ianpgonzaga - please check my comment below when available 😊
@danieltoussaint289
@danieltoussaint289 Жыл бұрын
Where do you have a shop?
@Skumo
@Skumo 3 жыл бұрын
Can l do this with the audi 4 2009 l have the red led screen l want to change it to the white one, is it the same process or???
@ianpgonzaga
@ianpgonzaga 3 жыл бұрын
I think that year is A4 B7? If that's the case then yes the change is possible.
@danieltoussaint289
@danieltoussaint289 Жыл бұрын
Do you have a shop in New York ?
@ianpgonzaga
@ianpgonzaga Жыл бұрын
Hey Daniel I'm in Australia actually 🦘
@hilarypelage5025
@hilarypelage5025 3 жыл бұрын
hi can u tell me why does the light on the rev count flicker and goes out but theright hand gauged light tsays on
@ianpgonzaga
@ianpgonzaga 3 жыл бұрын
Hi Hilary - can you please refer me to the timepoint in my video you are referring to? Thanks
@hilarypelage5025
@hilarypelage5025 3 жыл бұрын
can u tell me why the bulbs come on and off in the dash board and the rev counter side goes blank
@ianpgonzaga
@ianpgonzaga 3 жыл бұрын
Sounds like some solders might have come dry on your clusters PCB. Is it happening with extremes in Temp?
@hilarypelage5025
@hilarypelage5025 3 жыл бұрын
@@ianpgonzaga hi after trying another dash clock from ebay it made it worse with the same bar code on the sticker the only thing that was wrong was having no lights at all. . by trying the second dash all the warning lights came on and my steering went hard . took it to audi which was12 miles away it start to looseing it self right. so i left it so i can get another dash to put in . not knowing that the clocks as an imoblizer built in when taken out completely it do not even start change the face clocks and kept my original one to make one up . it works but now i cant get the esp light off it because of linking it in the car causing it to stay on perminately any idea could it be a sensor dash say fault readers manaul cheers
@ianpgonzaga
@ianpgonzaga 3 жыл бұрын
@@hilarypelage5025 because you had swapped the other cluster in and run it. Then put your original one back - some basic settings have been lost. A euro garage / mechanic will be able to help sort that out. You will need to run basic settings again. To get the replacement to work either - immo defeat the ecu - have the cluster’s data matched to your car. Hope that helps and good luck!
@1800tfr
@1800tfr 11 ай бұрын
at mine swap also the windows are not working and at abs have dtc p1647
@elvador999
@elvador999 2 жыл бұрын
Hey Brother, are you based in London/UK?
@ianpgonzaga
@ianpgonzaga 2 жыл бұрын
No sorry. Aus.
@aaronhogan2371
@aaronhogan2371 4 жыл бұрын
Ian - the handsome wizard of Audi dark arts!
@ianpgonzaga
@ianpgonzaga 4 жыл бұрын
*blushing*
@Benko_DieseL
@Benko_DieseL 3 жыл бұрын
How is it possible to needle sweep on 930?
@ianpgonzaga
@ianpgonzaga 3 жыл бұрын
this was with a reflash of the module
@Benko_DieseL
@Benko_DieseL 3 жыл бұрын
@@ianpgonzaga what reflash? Could you explain a little bit more?
@ianpgonzaga
@ianpgonzaga 3 жыл бұрын
@@Benko_DieseL basically a software update. Need to open the cluster. dismantle the two halves then solder some points. Lift some legs off a chip. Then read. Then adjust file. Then write new file to the cluster. Then adapt with vcds.
@Benko_DieseL
@Benko_DieseL 3 жыл бұрын
@@ianpgonzaga i know that you dealing with the eeprom and you get the software from a 930,am i correct?
@ianpgonzaga
@ianpgonzaga 3 жыл бұрын
@@Benko_DieseL I was tapping into the MCU not any eeprom
@klinkum
@klinkum 3 жыл бұрын
are u from Europe ?
@ianpgonzaga
@ianpgonzaga 3 жыл бұрын
Hello Saint Antoine. I am in Australia.
@daleresingh1469
@daleresingh1469 3 жыл бұрын
Hi I am trying to replace the cluster In my Audi TT mk2 8j but when I put my replacement in it’s coming up safe mode what do I have to do fix it
@ianpgonzaga
@ianpgonzaga 3 жыл бұрын
You need to turn off the ecu Immobiliser or you can get the cluster matched by someone who can do it. In what country are you?
@αισχοςντροπη
@αισχοςντροπη Жыл бұрын
@@ianpgonzaga hello ian can i have your e mail to ask you something please?
@ianpgonzaga
@ianpgonzaga Жыл бұрын
@@αισχοςντροπη hi! Please msg on insta or FB X
@αισχοςντροπη
@αισχοςντροπη Жыл бұрын
@@ianpgonzaga i ve sent you ian! Thank you
@ΜιχαληςΜ-θ5ν
@ΜιχαληςΜ-θ5ν 4 жыл бұрын
i made it and had problem with the steering wheel .
@ianpgonzaga
@ianpgonzaga 4 жыл бұрын
What do you mean? Did you scan for any codes?
@ianpgonzaga
@ianpgonzaga 4 жыл бұрын
Αισχος Ντροπη I am thinking you need to recode the cluster to match hardware in your car :)
@ΜιχαληςΜ-θ5ν
@ΜιχαληςΜ-θ5ν 4 жыл бұрын
@@ianpgonzaga i dont know how i can do this! cause i had immo off by my tuners and i have no knowledge for doing this kind of things! apfff i have vcds but i dont know which sector and what i must change
@ianpgonzaga
@ianpgonzaga 4 жыл бұрын
Αισχος Ντροπη if you still have your old cluster what you should do is plug it back in. After. Take the instrument module coding (17) Transfer that coding into your white FIS cluster. That should get you on the right track.
@ΜιχαληςΜ-θ5ν
@ΜιχαληςΜ-θ5ν 4 жыл бұрын
@@ianpgonzaga i ll try it and i ll tell you thanks for ur answer!! really helpfull!
@ThatDIYguy862
@ThatDIYguy862 2 жыл бұрын
we can see the mileage at 265k km
@zachannan23
@zachannan23 2 жыл бұрын
What socket is needed to remove the two bolts to remove the cluster?
@ianpgonzaga
@ianpgonzaga 2 жыл бұрын
They're 8mm sockets.
@83554
@83554 Жыл бұрын
With immo off on 8j you will have no power windows, no abs, no traction control
@tonybig78
@tonybig78 3 жыл бұрын
Windows will not work with this mod. So isn’t really functional!
@ianpgonzaga
@ianpgonzaga 3 жыл бұрын
Hm. Funny that because my car works fine. Maybe your off wasn’t done right.
@tonybig78
@tonybig78 3 жыл бұрын
@@ianpgonzaga oh really I’m a Vw specialist I do these all the time. So why don’t you take a video and show the windows work?
@tonybig78
@tonybig78 3 жыл бұрын
@@ianpgonzaga this is the correct way of doing it! kzbin.info/www/bejne/Z6LKmZuMe6yHasU
@ianpgonzaga
@ianpgonzaga 3 жыл бұрын
@@tonybig78 oh nice one!! Good to see some experts watching. For sure I can make a video of the windows working. Everything works fine with the immo off and engine swap. :)
@tonybig78
@tonybig78 3 жыл бұрын
@@ianpgonzaga funny how only yours works hey? kzbin.info/www/bejne/hqKbenmLeLpja6s
@daveperryLXXVII
@daveperryLXXVII 3 жыл бұрын
Esp error is fixed when you go for a drive lol
@ianpgonzaga
@ianpgonzaga 3 жыл бұрын
Yes. If all modules are fine the basic settings eventually work themselves out.
@christoharber6563
@christoharber6563 3 жыл бұрын
ME7EEPROM
@filipposSioupoulis
@filipposSioupoulis 4 жыл бұрын
messaged you on facebook! /filippos sioupoulis b
@daleresingh1469
@daleresingh1469 3 жыл бұрын
hi
@ianpgonzaga
@ianpgonzaga 3 жыл бұрын
Hi.
audi tt dash cluster rebuild
26:13
The Parrott Bro’s
Рет қаралды 28 М.
Cool Parenting Gadget Against Mosquitos! 🦟👶 #gen
00:21
TheSoul Music Family
Рет қаралды 33 МЛН
CAN YOU DO THIS ?
00:23
STORROR
Рет қаралды 39 МЛН
Wait for it 😂
00:32
ILYA BORZOV
Рет қаралды 6 МЛН
Osman Kalyoncu Sonu Üzücü Saddest Videos Dream Engine 262 #shorts
00:20
Soldar Cobre Sin Lijar La Tubería de Cobre #edgarelectricoplomero
5:06
edgar electrico plomero
Рет қаралды 172
3D Color MFD Audi TT 8n
5:08
Иван Власов
Рет қаралды 12
Audi TT -- пока есть выбор
21:13
Владимир Мельников
Рет қаралды 133 М.
Start the Car without Immobilizer
6:03
Cartech Home
Рет қаралды 57 М.
UPDATED!! Audi TT dash not working
11:56
Mels Motors Ltd
Рет қаралды 14 М.
Audi TT mk1 Instrument cluster Removal + Display screen + processor replacement
17:38
ECU Connection UK (By JCcars)
Рет қаралды 4,5 М.
Cool Parenting Gadget Against Mosquitos! 🦟👶 #gen
00:21
TheSoul Music Family
Рет қаралды 33 МЛН