Audiozerone ZE2000.1 Overview and Amp Dyno

Audiozerone ZE2000.1 (paid link) amzn.to/4j1S1PA
Audiozerone ZE1000.1 (paid link) amzn.to/4gDjohB
Audiozerone ZE500.1 (paid link) amzn.to/3W2fyGr
Audiozerone ZE3119 (paid link) amzn.to/3DI06ZK
welshaudio.com

[@MaximillianNagy]

I've had a lot of amps over the years and I got to say for the price when I bought it it is by far one of my favorite amps I use the 2000 one too power either 2 12s or a 15 and a kicker L7 it's an old one not a new L7. But if your looking for budget stuff like me and are always broke this is a great pick, always remember to check your grounds too kids. Anyway you won't regret your purchase I've had this amp fry s few 12s pretty incredible

[@stereomojo]

@@MaximillianNagy nice!!

[@Islandsilvia]

that was me that suggested it and asked if you could buy it and send it to you and Dyno. thanks for reviewing this bro. I appreciate it .

[@stereomojo]

Thanks for the suggestion! I enjoyed doing this one!

[@melvinartis1918]

I own 2 of the 1000.1's ,and have not had any issues ✅️🖤. I think I really need this one 😮👍🏼

[@stereomojo]

They’re both pretty solid!

[@bradleylake6632]

Definitely a great buy thank you for reviewing amps. I appreciate it very much.

[@stereomojo]

Thanks for the support! I enjoy it!

[@johnmedrano9782]

your new mic sounds great. great vid too

[@stereomojo]

@@johnmedrano9782 thanks John!

[@Scotts229]

I liked seeing the .5ohm music run. Very nice! I’m enjoying the ZE500.1 that I won. It’s surprisingly stout.

[@stereomojo]

@@Scotts229 that’s great to hear! Thanks Scott!

[@chrisnunya7171]

Mic sounds good! 👍🏻 Bench looks good too with your new logo proudly hanging right up front. 💯 I love it when a cheap amp does what it says it does, (almost). I think that amp is worth a look-see. Great video buddy. 💯🤘🏻

[@stereomojo]

@@chrisnunya7171 thanks Chris!

[@TheGodofSEO]

Good price and a good amp. Very competitive set of amps are now available sub-$150.

[@stereomojo]

Yeah, I agree!

[@paulgood2218]

1960rms at 14.3 is definitely a pass for 2K at 14.4 amp. Thanks for the video. I enjoyed it

[@stereomojo]

@@paulgood2218 yes, good point!

[@trucavalier]

748 at 4 I was sold 👍

[@stereomojo]

Yeah, this amp does some good numbers. It’s so nice compared to seeing the amps that only do 200-300 watts.

[@ChrisRichardson-v6c]

So with this I'm curious why the ze1000 hit it's numbers no problem but then the bigger brother has saggy bottom on the certified.. the headroom on the 2 & 1 ohm loads though in my opinion make up the difference.. pretty darn good for the price point 😁

[@stereomojo]

Yes, I completely agree! I certainly wish it would’ve hit the certified and uncertified numbers as well.

[@Special.Purpose.Weapon]

The mic sounds very clear ( no more echo ) . I like the Welsh sign as well. We need a shot of the new sign with the lights off lol😂 I'd give that amp a pass like Big D would because it's so close to rated. I'm actually looking at the off road amp for my RZR 😉

[@stereomojo]

Thanks WD! I really appreciate the feedback and support! Let me know how it goes with the RZR amp.

[@Special.Purpose.Weapon]

@stereomojo will do 😉

[@melvinartis1918]

Yeah boiii! Nice video! I most definitely gonna try to get me one of those 🫡🖤

[@stereomojo]

Sweet! Thanks Melvin!

[@ronaldklein4050]

Thanks for the review, nice dynamic headroom at 1 ohm. Gotta say, love the Welsh 2k though, been beating on that thing, love the clip light on the remote. Dollar for dollar I think I'll stick with the WA-2K.

[@stereomojo]

@@ronaldklein4050 lol, I can’t disagree! Thanks Ronald!

[@MickeyMishra]

I like these cheap amps for your Daily as if you live in the Big city then grows legs and runs off, you don't feel so bad afterwards. You can tell something like this just went down a few days ago for me. After the first few attempts, I just simply refused to put in my really nice gear in my rides.

[@stereomojo]

That’s a good perspective. I hate that happened to you!

[@stevemaniaci4750]

Same thing happened to me 2 years ago . All custom box 4 15" cross c-7 subs some tools an a taramps 12k MD amp , trust me that hurt . The whole truck did get recovered latter with nothing in it an I had a alarm. That's why I don't hate on other brands , got to be practible. Have. A good one 👍

[@gregkirby]

Looks like a good amp for a budget build.

[@stereomojo]

Yes, it sure does!

[@rubenb775]

Man I wish i would have bought this amp over the stinger 2000 watt amp. This is $100 cheaper. Oh well the stinger amp still performs excellent. Great video btw super helpful. I bought the ze1000 for my niece and was impressed for $80 dollar amp. The only minor thing i was not a fan of was the bass knob has no bracket to screw it on. The double sided tape keeps falling off lol so it just sits in her cup holder.

[@BDauto86]

It's so close not even worth complaining about. Then with dynamic 1ohm well over 2k, it's a dang good deal really. My friend bought the ze1000 and it's been working good for a year so the quality must be decent.

[@joshholden8561]

I picked up 5 of these and yes they did just get released.

[@joshholden8561]

These amps also will run .5 ohm load no issue they are built like a solid tank i got mine on prime for 114.50 including taxes.

[@joshholden8561]

This amp has been out for roughly a month or so.

[@stereomojo]

@@joshholden8561 wow, what a deal!

[@stereomojo]

@@joshholden8561 cool, what are your plans for them?

[@myfavoritecolorisclear]

​@@joshholden8561i gotta see what you do with these bro. I have one in my sentra on a sa v2 12 at 1 ohm but I hear .5 calling my name

[@ChrisRichardson-v6c]

I would like to see you do a dyno of the recoil di1200.4 as I've purchased one but I've only seen one dyno run on KZbin and I feel like to be fair to consumers there should be more. Looked like it did very very well for the cost as well

[@stereomojo]

I think that's a great idea, but I haven't got my hands on one yet. Maybe I can track one down.

[@ChrisRichardson-v6c]

@@stereomojo I know they are around $117 on Amazon right now.. that's with tax. I'm planning to use it until I can afford to upgrade unless it turns out to be as good as the dyno showed

[@gabrielayers8858]

Circuit board looks very similar to some DC audio amp guts, good chance that came from same build house some where in china

[@JasonWW2000]

Most amps look similar but that definitely does not mean they are the same. Which model d c audio are you referring to? I don't see anything that looks similar.

[@jeffcollins1805]

HEY IS THERE ANYWAY YOU WOULD DYNO A " STESTSOM BROVO BASS FLEX 3K I BOUGHT ONE AND WOULD ABSOLUTELY LOVE TO KNOW WHAT ITS PUTING OUT I HAVEN'T SEEN ANYONE ELSE DYNO ONE BEFORE THANKS....

[@stereomojo]

That's a great idea for a video!

[@MattyDaddy14]

Just rewatched this dyno video. This would be perfect to add a 12” ported sub to our 2019 Chry. 300S! 1. It has high level inputs! 2. Has a bass knob (necessary as I’m not the only driver) 3. Almost rated power to clip - vs cost is excellent! 4. Fuse rating tells me it’s capable of UP to 2000watts 5. Subsonic filter goes down to 15hz (not just 20 and up). 6. Dynamic range exceeds 2000W prob based on wiring size/quality, amps in, etc. 7. Decent design but def needs rubber bushings on the mounts to protect from vibrations. 8. 0-180 phase adjust. Question: for a budget 12” single build, this seems perfect. However, if I wanted to run say the new 12” American Bass 12” XFL -1500 watt rms driver, would this amp be sufficient? Otherwise, I’m thinking of running 2 more budget 12”s in a ported QBox (for size) like the new Down4sound SB sub 🎉 Thoughts? 🎉

[@dannydennis318]

Will you do one on the Plinius 1000.1 ?

[@earnestmatlock9694]

Great video as always and it does give good power for the dollar spent. It doesn't dyno out (testing) full watt to watt against you WA 2K amp. It doesn't have a fan to circulate air inside the case/circuit board. Overall this isn't a bad amp at all considering the price point But the WA 2K is an superior build quality design that will likely live for years. This amp may last a while as well but installation quality and power cable quality and sizing along with sufficient electrical to run it properly. An extra battery close to the amp will help a lot to keep stock electrical from being smoked. Overall I don't see any issues; but it would have to be operated in an automotive environment for a period of time to fully prove reliability. Great video as always and 73 GOD bless Earnest K5EWM 👍.

[@RubenRodriguez-jb1tg]

Mojo keep em coming. We should ship you our amps for your videos.

[@stereomojo]

@@RubenRodriguez-jb1tg thanks Ruben! Do you have one mind?

[@RubenRodriguez-jb1tg]

@@stereomojo contemplating a temu buy. TORO R3

[@stereomojo]

@ grab it and send it to me! Lol!

[@RubenRodriguez-jb1tg]

@@stereomojo I probally wil brother. Ill keep you posted.

[@ericsohood25]

What would be a good amp to push 3000 watt Quantium Audio 12

[@YugiSatan]

Signal to noise ratio on these? Didn't see it for the 1000 model, thinking of swapping from the rzr1-2500.d to it if it's higher

[@JaMarvelousjmar]

How about doing a Dyno run around 20hz to see how much it falls off

[@stereomojo]

That would be cool to try. Easy too!

[@evilinside5984]

@StereoMoJo- This is a very good value amplifier. But your Welsh Audio WA2k, does more power @ every ohm load, has a better Bass knob with Clip light, & Better RCAs= Awesome!

[@stereomojo]

@@evilinside5984 hard to disagree! Thanks Evil!

[@MrTakeone51]

That bass knob and amp looks similar to the ocean audio monoblock amp

[@myfavoritecolorisclear]

great amp i have one

[@stereomojo]

That’s awesome! It’s a good one!

[@myfavoritecolorisclear]

​@stereomojo i have it on a sa v2 12 at 1 ohm but now I'm thinking .5 ohms on 2 now that I've seen it's .5 stable all day

[@JasonWW2000]

​@myfavoritecolorisclear Keep in mind that you're going to have impedance rise.

[@myfavoritecolorisclear]

@@JasonWW2000 ya a crap ton like 2.7 to 5 ohms on music while wired to 1 ohm. wired to half ohm ill prob see 1.5 to 2 ohms

[@myfavoritecolorisclear]

@@JasonWW2000 how come "subs and paws" channel doesn't seem to get much box rise ever. dude will be wired to 2 ohms he says and sit around 2.2

[@ChrisRichardson-v6c]

Also as a side note , there are a lot of brands putting up similar numbers with a much smaller footprint. Not a big fan of the size to watt ratio

[@myfavoritecolorisclear]

its doesnt get warm though. stays cool

[@stereomojo]

Yeah, you’re right. It is a little big for a 2k these days.

[@carlosgarza7878]

I'm also sold on this.

[@bassmansl9596]

Sweet

[@MrTwone79]

And it can handle up to 16volts

[@briandobbs9595]

Man I should have bought that 2K from you two weeks ago when I wanted to I ended up buying a DB Drive 2K when I hooked it up it won't come out of protection do you have a good amp repairman by chance sir

[@stereomojo]

@@briandobbs9595 dang! Sorry, I don’t.

[@JasonWW2000]

Is it the WDX series?

[@briandobbs9595]

@JasonWW2000 I'm sorry I was driving yesterday when I was messaging you the DB Drive WDX 2000.1D Amplifier

[@briandobbs9595]

So needless to say I hope Friday when I get paid you still have one of your 2K amps I will be coming to Coleman Saturday sometime I would like to meet up with you if possible so I can buy one of them and I will try to get this other amp fixed eventually

[@stereomojo]

@ sounds good Brian! Yes, I still have plenty of WA-2K’s. Both versions. Do you like the one with the silver strip or the one with the red? I can bring both if we meet, so you can decide in person?

[@zaywilds3579]

Really wish they would show the dampening rating.

[@Islandsilvia]

what would be better amp between the following Amps? recoil 2500.1 vs audiozeroone ze2000.1 vs tspower 9000 or 6000

[@Special.Purpose.Weapon]

@@Islandsilvia I'd go with Recoil all day. They make a solid amp and good customer service.

[@onesikm3]

The tspower9000 is a big contender but it pulls serious power. I wouldn’t put it in a stock system. The audiozerone ze1000 is a perfect amp for a stock car electrical and it will blow you away for what it could do for under a hundred bucks

[@gabrielayers8858]

Personally I would have to pick ts power 9000, it's a cab22 clone and strapable so always have option to grow your system and upgrade down road for bigger and more power

[@gabrielayers8858]

Power acoustik Vertigo 10000 is just another cab22 clone that is often over looked that puts out decent power for price

[@stereomojo]

I need to get that Vertigo 10k

[@Triplej863]

Imo if this guy had a clip light, even just on the amp itself and not on the bass knob, I'd be soooo sold. Dang, that's still a steal

[@stereomojo]

Yeah, a clip light would’ve been nice!

[@Stoneman1971]

Algorithm comment 👍

[@stereomojo]

Thanks Allen!

[@delamarhamilton7225]

They need a 4 channel

[@TRONMAGNUM2099]

If an amp can do its power dynamic, I'll give it a pass. Music is dynamic, so you know this amp will hit when it needs to.

[@stereomojo]

It’s hard to argue with that!

[@BigMerc91CMDNJ]

What I don't like is the size and no clip light. Your amp is way better for the money.

[@stereomojo]

@@BigMerc91CMDNJ I have to agree! Thanks!

[@shaferualhunt9129]

Good vid, but can you and need to stop the lip smacking, sucking of teeth smacking, annoying while listening to u talk, and I'm a follower by the way, LOL

[@JasonWW2000]

Hmm, I don't hear it.

[@cyberflexx953]

I really enjoy your videos. Thank you for rating amps and showing us trash or treasure amps. But I do have a little constructive criticism and it's something that has been driving me crazy ever since I started watching your videos. You may want to go back and watch your videos so you'll know what I'm talking about can you please stop the teeth sucking lip smacking sounds after every sentence it's drives me insane and it kind of makes me just fast forward your video and not watch the whole thing. Not being a hater but just pointing out something that might be driving your other viewers crazy too. Jeff Dunham has a character named Sweet Daddy D.. and that teeth suck sound is his trademark annoyance. You can YT search that and see what I mean.. Thanks again for the videos and I really hope you take this suggestion to heart.

[@Jsizzle190]

Would one of your welsh audio 2ks be a good amp for my 2 nvx vcw3 10s im really considering one

[@stereomojo]

Yes, I think that would work out nicely. Just be sure of your final ohm load, and don’t go below 1 ohm.

[@justinkelsey9218]

Hey is your welsh audio dot cam website down? It won't load and hasn't for a week i wanted to check out the 5k are you selling the 5k yet?

[@stereomojo]

@@justinkelsey9218 the website is up and working. I don’t know why it won’t work for some people. I’m not selling the 5k. I’ve got 2 of them and I think I’m gonna keep them both.