Aurora Mini Fight - You need one!

[@Imaginertiophile]

Ah yes. Thanks for the shout out Nick! I posted a short video on my page under the Imaginertiophile youtube page guys! Heres a link kzbin.info/www/bejne/m4W6nIiNqb58eKc

[@alvaives9606]

I really appreciate the jump cuts in the beginning when talking about the quads specs.

[@jrodrc4137]

Great review as always Nick! I love when your rippin around and smoke a tree or a chair and its a dead stop. shows what these things can handle. Also shows that you crash too. Cause they way you rip is pretty awesome to watch.

[@scootroter4859]

Jrod... INDEED! LOL

[@NickBurnsFPV]

Thanks. This one didn't have any dramatic crashes, I am sure if I had put my normal number of flights on it, there would have been at least 1. :)

[@michaelreyes8670]

Nick your my test pilot. Thanks for your honest reviews.

[@NickBurnsFPV]

lol, sure, I enjoy being your test pilot.

[@minkorrh]

Careful what you wish for Nick,.....if they all come tuned then where's the fun in 'figuring it out'? And you might be out of a channel if they all flew great out of the box. You and the rest make this hobby fun and entertaining. If it wasn't for going sideways on KZbin and watching a quad vid I _never_ would have picked up the hobby.

[@SH4DY]

I really like the format of your review, and you are probably the only reviewer that can actually fly well keep up the good content

[@NickBurnsFPV]

Thank you.

[@gitech7450]

Great review Nick! The cow catcher is JC's design on his Blue Falcon, as it is on the 5" BFight. "BF" = Blue Falcon? Their theme is Blue? They look identical to JC's design? Yep! ;) Cheers :D Rest in peace JC! :)

[@NickBurnsFPV]

JC is missed, he was a great, RIP. I thought I saw Nurk had a frame with it to, but I still don't see a flight use.

[@gitech7450]

[@stishy75]

Baby hawk is way too heavy and the mini fight looks so much better. Simple wins out for me. Keep 'em coming dude, your one of the few I trust as far as reviews are concerned.

[@scootroter4859]

bry robson... I totally agree! Way too heavy for a 2"... good ones that size weigh 60-ish g ... Not 82.5 ! Sure, it probably gets better when you do the 2.5" arm mod, but it should have come like that in the first place ... I don't want to have to go to all that work just to make it good! Plus, that honkin' capacitor hangin' out the side like that! Seriously?! This quad is so0o overrated because it's made by Emax! If it had Eachine, Happy model, Furibee, Awesome, or practicality any other brand it would have been below average.... Which it is!

[@stishy75]

Very elegantly put, but I'd have to say even for a 2.5 inch prop the baby is still a bit porky, if it lost 10 grams (and the capacitor sticking out the side) it would be a much better option.

[@NickBurnsFPV]

Thanks, I brought in the babyhawk-r as to highlight the differences with the babyhawk-r getting all the hype right now.

[@jjt1824]

My bhr with 2.5" arms is exactly the same weight as my minifight. Bhr should have come this way. They fly very similarly and have the same run times now. Very pleased with both. My minifight did randomly drop out of the sky yesterday. Not sure why, should not have been a failsafe...

[@alexcrowder1673]

Just thought id point out that if you are using the pyrodrone 2.5 inch arm kit for the babyhawk r, it will actually weigh LESS than the aurora minifight. Pyrodrones arm kit weighs exactly the same as a stock babyhawk r (6 grams less than the other 2.5inch kit). So the babyhawk will end up around 85-90 grams with props and reciever. The minifight actually weighs 94 grams with props and reciever. It does have better parts though. Id definately feel more comfortable using 4s on this 28amp esc than on the babyhawk r. It honestly baffles me that the babyhawk r can even run 4s with a 12amp esc. I know it can, I just dont understand how.

[@ElevatedKustoms]

@Nick Burns The carbon on the bottom of the frame under the camera is to protect the PCB of the camera. Have seen many instances where having that small carbon extension has helped save the camera's board. Being that micro cameras have PCBs exposed. Drone Camps RC had a video comparing the GT90 and Baby Hawk R, where he damaged the GT-90's micro camera in a crash. Due to a direct hit to the lower portion of the camera's PCB. If the frame had been extended similar to the mini fight, it wouldn't have been an issue. However you might spend less money buying a new micro camera over purchasing air cans to get all of the dirt from building up inside the hole!

[@NickBurnsFPV]

Yea, I can see that. a rock or hard surface that isn't flat getting in there.

[@troncho81]

As for the gap under the camera, I stick the balance plug of the battery there... very useful. ...😀

[@deadmoo83]

Your review was worth the wait.

[@NickBurnsFPV]

Thank you

[@aarong.4691]

Ha ordered one before the video even came!!!! Just got to do some hover tests today and I can say this has some punch!!! I was doing crazy punchouts on half throttle. So anyone thinking about getting this do it. Also great video as always

[@NickBurnsFPV]

Thank you

[@one4all989]

Looks good. There is a new hglrc hornet also that is the same size as this one. The hglrc 145 was great.

[@NickBurnsFPV]

I hope to get to test that one, looks good on paper

[@neojeets]

Nice review, Nick. Looks like a good product. Also, I bought a few of those Airblade lipo straps a while back based on your recommendation and they are really good. I just ordered another 10 of them, lol.

[@NickBurnsFPV]

yep, I am getting low I need to do the same.

[@nathanielstaal1941]

You have the best reviews ever dude such a quality!

[@NickBurnsFPV]

Thank you

[@meave2712]

Hey Nick, picked this one up on sale per you recommendation and absolutely love it. Quick question: did you turn on dynamic filtering and if so are you getting flutters? I'm using your pics and love them, but when enabling dynamic filters, I'm getting flutters during punch outs. Thank again for the recommendation!

[@NickBurnsFPV]

I didn't turn dynamic filtering on. So the flutters stop if you turn off dynamic filtering? Has the flight stack come loose?

[@mrguppy1016]

GOOD STUFF...! DIRECT TO THE POINT EXCELLENT PERFORMANCE AND TEST..! NO BS LIKE SO MANY OTHER REVIEWS CLEAR VOICE AND TO THE POINT 5 stars to your review dude

[@NickBurnsFPV]

Thank you

[@LAHover]

I love the format of this video, Direct and well edited :) ... Subed

[@NickBurnsFPV]

Thank you

[@ktrimberger]

Always a solid review, Nick! Good job. I'm subscribed and look forward to your next reviews.... thanks

[@NickBurnsFPV]

Thank you

[@kevinvr2800]

Nice review. I'm going to look into this one. Have you done any Mini's that can fit a RunCam Split Mini? Since I'm new to flying, I don't feel safe strapping my GoPro to my 5", but would like to get better at flying and get decent quality video. I Think I would have less fear and faster learning curve if I practice more on the smaller 2.5" size quads. Thanks.

[@NickBurnsFPV]

The ones I am most familiar are frames from flexrc.com mainly the ascent line.

[@jesperandersen9383]

Hi Nick, very nice review! I’ll be watching everything on your channel from now on. What battery did you fly with here?

[@NickBurnsFPV]

GNB 3s 550mah. Thank you

[@jesperandersen9383]

Thanks, Nick.

[@duckslave]

Good review - but mine showed-up with a dead VTX and camera. Now I have the usual GearWorst run-around - "send us a video of the dead parts or parts not working." I installed an HGLRC TX20 V2 and Runcam Micro Swift - and the quad flies great. Also hooked up the Tramp protocol per Imaginerterophile's helpful video.

[@NickBurnsFPV]

Have you gotten a response on your support request?

[@duckslave]

Nick Burns - waiting for a second response. The first was their “canned” response.

[@OyeCaballero]

Great review lead go purchase. Thanks Nick. My only thing is that right out the box pids were terrible and I used your tunes but some reason I get a weird wobble when punching out. You think I might have something defective on my unit? Your input would be much appreciated!

[@NickBurnsFPV]

I would say its more likely the tune needs tweaking. I would try lowering p on pitch and roll one at a time and only by a value or two at a time.

[@reboot110]

Awesome, best micro reviews on KZbin, thanks man!

[@NickBurnsFPV]

Wow, thank you

[@reboot110]

Nick Burns Absolutely deserved, recently became obsessed with micros (like everyone) and you have been a crazy wealth of information

[@plainuser48596]

I really like the fast specs overview, nice flying too! Did you try Diatone GT-R90? Wonder how this stack up to it

[@NickBurnsFPV]

Thank you.I have not had the opportunity to try the GT-R90. I think its really hard for a 2inch prop to compete with 2.5.

[@frankbarajas]

Great review and awesome flying.

[@NickBurnsFPV]

Thank you

[@CRayTechVlog]

Looks purdy good. Great review Nick!

[@NickBurnsFPV]

Thank you?

[@marksherman630]

I love my Aurora ARFun 90 2", and I really love my HGLRC XJB-145 3". Really want a 2.5" but I think I can wait to see your comparison for this Aurora to the HGLRC Hornet (on BG) specs similar (has f4 FC) and price same.

[@NickBurnsFPV]

The hornet does have good specs, we shall see. Not sure its coming to this corner of the world.

[@scootroter4859]

Thank you Nick for another typical great review! You are definitely one of my very favorite reviewers! So thorough, straight forward, and honest without question! WHICH: Mini Fight 124 @ 93g or Leader 120 @ 70g... Very similar specs, except this one maybe has a better camera? Does it? Oh, and the Leader 120 is back on Flash Sale for $88 bucks! At close to 1/2 the price, I think I know your answer, but please share it with us. Thanks Bro! Again, nice job! :)

[@rawpicsfpv3516]

Scoot Roter i want to know it too!

[@aarong.4691]

I recommend the minifight. I don't have the leader but I can tell you that the minifight is very powerful, punchouts on half throttle. Hope this helps.

[@NickBurnsFPV]

The leader will win out in outright flight performance, but only by a slight margin. I believe the mini fight frame will be more robust and it also has the ccd cam which is a big improvement. The mini fight also has the xt30, so many won't have to change that out, the xt30 is a more robust connection and easier to plug and replug imho.

[@scootroter4859]

Nick Burns... Thanks much Nick! That's the first thing I did when I got my Leader 120 was changed it to an XT30. Everything is XT30 or XT60... the JST is dead, may it rest in peace! Only the Tiny Whoop connector will be allowed to carry the JST name! Hmmm, I always thought the Leader 120's frame was a great design and very durable. The Mini Fights frame must be awesome! Co0ol! How does the Leader 120's camera compare to the Mini Fights? In what way is it worse? Take care Nick!

[@NickBurnsFPV]

while the leader has one of the better AIO cmos cams, it doesn't compare in any way to the ccd micro cams like the mini fight has, the new cmos (not AIO) from foxeer and runcam are very good too. Some have broken arms on the leader, I would expect those same people to have to crash harder to break the mini fight frame.

[@TheQuadcopterReview]

Another great review Nick.

[@NickBurnsFPV]

Thank you

[@mr.sandman4782]

Im not sure what recording devise your using but could you invest in a sound pop filter. Love your videos

[@NickBurnsFPV]

Do you know of a good one? I use a cell phone to record.

[@marksherman630]

Looks like a good one - did you run the stock filters or turn on dynamic filtering and turn off the 3 enabled notch filters?

[@NickBurnsFPV]

No it was on PT1, with notch and 2 turned off, left D term notch filter on.

[@marksherman630]

Any reason to leave the last filter on (hot motors) ?

[@REDROBRCFPV]

The benefit of the bottom part under the camera is so you have a good place to hang it on the wall when your not flying lol

[@NickBurnsFPV]

ha, we crash these things and want to make them wall art too. so funny we are.

[@davidfarmer1736]

Sunday, February 11th. The forecast is for rain all day, rain all yesterday, rain last weekend. Thursday and Friday was sunny and warm but I had to work. Shoot! You know what shoot is!

[@SSiXaXiS]

David Farmer i was in the same boat man managed to fly Saturday before the rain... it being my second flight ever, I didn't want it to end...

[@GroundControlRC]

Great review! Love the Return-to-Home maneuver ;-) Much Fun ;-) Happy Flying!

[@NickBurnsFPV]

Thanks

[@michaelpetale6872]

Great Vid and flying skills too!🧐🧐👍🏻👏🤪🏆

[@NickBurnsFPV]

Thank you

[@Prop-A]

Sounds really good!

[@bzfpv5311]

Cool mini. Nice flight footage as always :)

[@NickBurnsFPV]

Thank you

[@BIGDRONEFLYER77RC]

Looks fun Nick, looks like it screams bro

[@NickBurnsFPV]

Thanks, its fun to fly

[@deadmoo83]

I agree. The cow-catcher is kind of dumb. You will almost always be pitched forward.

[@scootroter4859]

Curtis Campbell... Or, make it stick out another inch! Lol Then it would work! I wish they'd just make the side camera protection come out more, just so it's barely not viewable in the camera.

[@deadmoo83]

If they made it an inch longer, i think it would just cause the quad to lever into a camera strike when it hits first. It would actually be worse than not having it at all.

[@flowrfpv]

Has it XT60 or XT30 ? In video you said XT60 but most of micros is running XT30 Thank you for reply !

[@NickBurnsFPV]

ha, yep, xt30.

[@headfog7621]

If I'm trying to sell you on the cow catcher...i would said you can hang this quad on the wall with one nail and keep it from falling off the table or being steeped on while on the floor.

[@NickBurnsFPV]

yea, that would work.

[@johngraboski]

You're having waaay too much fun there! !! Jealous... heheh! rock on!

[@NickBurnsFPV]

Its all fun.

[@johngraboski]

Nick Burns hello! I know that!!! :p that lil guy is just a tad too pricey. Sticking with a lizard95 at 95€ at BG right now.

[@treekata3257]

Please compare the EMAX Babyhawk-R 136mm when it comes out. Thank you for your great videos.

[@NickBurnsFPV]

I will try, emax sent a babyhawk-r, I can only hope they will send this when its out too.

[@mrblue4997]

Thanks for the great review, Please tell me, can this quad handle 4s battery?

[@NickBurnsFPV]

The motors and esc should be fine. I am not sure about the flight controller, I cannot find a rating for that component. I did not test 4s as the manufacturer didn't rate it for 4s.

[@FarmerFpv]

F****** hell that thing flies good Nick ❤️ I do need me one or maybe two lol

[@NickBurnsFPV]

Its good fun. Quick hitter packs

[@MCsCreations]

Awesome model! But that camera angle was weird. :/ Great flight, Nick!

[@NickBurnsFPV]

Weird? In what way?

[@MCsCreations]

Nick Burns Too low, I gess.

[@TheArf200]

looks like xt30. Either way good review. looks good and fast.

[@thomasironbruni1820]

You are correct - it is an xt30 .

[@jeff2633]

Does this knock the leader 120 down in your ratings?

[@NickBurnsFPV]

yes, based on price point, durability and micro ccd cam.

[@pauleverettguitar1568]

Hey Nick, could you recommend a great 3 " micro ? Either as a first build or PNP

[@NickBurnsFPV]

I recommend the HGLRC xjb145 kzbin.info/www/bejne/hZvRXoOvgcaNoNE

[@pauleverettguitar1568]

Nick Burns Watched your review on this model. Thanks a bunch👍

[@shawnmsadoques2221]

I received mine in the mail just two days ago. Did a hover test indoors for about 30 seconds. All the motors were so hot I burnt my hand. Did all the typical checks for hot motors and I can't seem to pin down the issue. Think now the motors are burnt out, since it doesn't even lift off. I'm having terrible luck with these models from china.

[@NickBurnsFPV]

Was it wobbling while you hovered? Turn the pids all down 50% and see how it does.

[@shawnmsadoques2221]

No wobbles, it was very stable. Had already turned pids down as other reviewers stated that stock was just to high anyway. Thanks for the reply

[@NickBurnsFPV]

hmm. well you checked and double check the motor mounting screws and prop screws, I would think its the esc causing it, if its not the screws or pids.

[@shawnmsadoques2221]

Yes, thank you. That was my same conclusion.

[@Cc-nj2zm]

For the 2 to 2.5 class, which one is your favorite?

[@NickBurnsFPV]

skystars x120

[@krul23]

yesss i need one!! 😭 please give me one Nick!! 😭😂

[@dronereviewman9580]

2nd 👍 Yes i need one lol!!!! I love small fast quads !!! Great post!!! And even better review!! Love your channel and keep helping the hobby out thanks man!! 👍👍

[@NickBurnsFPV]

Thank you

[@sirivmig7132]

hello, what do u think about this and babyhawk2"? because baby is 122$ now. thank you

[@NickBurnsFPV]

In general I prefer quads running 2.5inch props, but the babyhawk r value is very hard to beat.

[@wilcapoeira]

Regarding the bottom plate protuberance nick, check Kabab’s latest video where he broke his new eagle from a bottom front impact.

[@NickBurnsFPV]

I would think it would have to be on an uneven surface, or an upside down crash. Bottom mounted battery and the motors/arms would protect the camera in a ground crash. The only cams I break are from higher mounted cam and upside down crash. But maybe.

[@grapefru]

Im used to flying five inch and with the 2.5 I'm looking for something that doesn't break and feels similar to a 5 inch. Should I go for this or the lightspeed?

[@NickBurnsFPV]

Coming from 5" and the ccd cams on 5", I think you will be more happy with this this. The leader120 slightly out performs, and is less expensive. But the components in the mini fight are better, and the frame is also more robust.

[@grapefru]

Nick Burns yeah the biggest thing is quality, I'm tired of shit breaking. I think I might go with this guy :))) thanks

[@phatpastor32974]

What is your filter settings?

[@NickBurnsFPV]

stock filters.

[@filiped7298]

Another one to add to my shopping cart.

[@NickBurnsFPV]

lol

[@--JohnDoe]

Can you top mount the battery?

[@NickBurnsFPV]

I think so. Getting the battery strap through the top is going to be tight, but I suspect we can. We would also need to relocate our Rx antenna, but that isn't a big deal.

[@MCsCreations]

BTW, Nick, what's the size of those straps? Thanks!

[@NickBurnsFPV]

Airblade is 10mm, RDQ is 16mm

[@MCsCreations]

Nick Burns No, I mean the length. ;) I bought some, but... They ended up being TOO big. LOL

[@NickBurnsFPV]

RDQ 150mm Ariblade about 165mm

[@MCsCreations]

Nick Burns Nice! Thanks a lot! :D

[@cowtownfpv4030]

What would you get, this or the emax babyhawk racer?

[@cowtownfpv4030]

I should really start watching videos before I comment

[@NickBurnsFPV]

lol.

[@FierceCards]

Do you by chance know where I can buy a new frame?

[@NickBurnsFPV]

I don't. I did poke around a bit, doesn't seem like the frame only is sold.

[@Iyyobr]

I’ve had zero issues with my aftermarket 2.5” arms

[@NickBurnsFPV]

good. I don't have first hand experience, seems like there is a good variety of 2.5" arms to be had.

[@rc-fannl7364]

Mine flies great but drops out of the sky at random. First thought it was the single antenna D8 receiver but now with XM+ it still does it. Stops responding, I get the after flight summary and it disarms...

[@scootroter4859]

RC-Fan NL... You have an intermittent short somewhere. Try arming it without props on and wiggle every wire, etc. Anything you can think of! If it resets, you've got it! Let me know if that helps!

[@deadmoo83]

If you can't find a short, I would also try turning down the output power down on the VTX, if the VTX is powered off the 5v from FC and not battery voltage. 200mW might be overloading the voltage regulator.

[@scootroter4859]

Curtis Campbell... Ahh! Good call! "Sapping all the juice!"

[@rc-fannl7364]

I'll see of VTX uses the 5V, and if it does, set it one power level lower. I did notice the blue sleeves around the motor wires rubbing against the motor bells. I'll slide these back a little, or trim, or just remove, if all else fails.

[@rc-fannl7364]

I tried wiggling wires, no effect. I moved the blue "net-stocking" sleeves away from the motor bells, so these are no longer rubbing against the motors, and reduced VTX power to 100mW. First flight went well, but between the 2 crashes, it also flew fine, so I'm not getting the champaign out yet to celebrate.

[@stecozz4907]

Is the camera 4:3 or 16:9? 👍

[@NickBurnsFPV]

4:3

[@123jah]

How is the pocketquads.com compared to this one?!

[@NickBurnsFPV]

even a less fair comparison to the pocketquad. this is double the weight, 1106 motors and 3s. vs 2s and 1103 motors.

[@123jah]

But for a beginner? Wich one to shose?

[@rwells242]

I disagree with your frame design analysis. That would be bottle opener would prevent the hit from going beyond a certain point upon a forward impact also protects from a bottom hit . If you remove it the camera and the cf camera plates would be absorbing the impact. Good flying as usual ; you do favor a particular direction however. Take that with a grain of salt as your flying skills are well beyond mine at the moment. Other than your frame analysis I do appreciate your honest feedback.

[@NickBurnsFPV]

I see your point. But I think the arms and battery are missing from the forward impact model. It would need to be an impact against an object that fits between the arms and between the battery and top plate. The battery could become dislodged, but this will decrease impact at the very least. I can see where it would help if striking a pole or a tree stump while descending.

[@rayikaikin]

The camera colors seem dull but other than that looks good

[@NickBurnsFPV]

There isn't much color this time of year.

[@rayikaikin]

Ahh

[@justme_12342]

Nooooooo.i finally made a decision to go for the GT-R 90 next month (when the paycheck is in 😉).and then this video comes along...

[@NickBurnsFPV]

sorry to complicate your spending. I do suggest this over the GTR90. 2.5 flies much more aggressively.

[@justme_12342]

Nick Burns don't apologise.i rather like it you're being honest.although I bought the beebee 66 on your recommendation and it was a total waste of money,I still believe in your honest reviews.i saw in the flight video this one has a lot of more punch than the GT-R 90 and is more capable of freestyle.almost flies like a 5 inch.would be a great bashing quad for me to practice with I think.thank you!

[@NickBurnsFPV]

oh no, what was wrong with the bb66?

[@--JohnDoe]

Corky Fpv get 1106 motor guards if you plan on bashing it. You might aswell get motor vibration dampening pads while youre at it. You will need slightly longer screws. Buy a 6.00 1.5mm set of different sizes. I put motor guards on all my quads.

[@justme_12342]

Nick Burns really underpowered (more then half of throttle to get it lifted) even for such a little one and really short flight time.1,5 minute max and really not pushing it (due to my skills).maybe I will use the parts for a custom build

[@geoten6333]

Hi Nick and everyone. I broke a motor and I can’t find it anywhere. Anyone know where to get it 1106-5500kv? Thanks

[@NickBurnsFPV]

They are sunnysky motors. Google 1106 5500kv they will pop up first

[@geoten6333]

Nick Burns, I tried to look for it but I got no luck. There are many Sunnysky motors but different kv, even different brand. I put on the Emax motors from baby hawk r to try it. Seems to work fine but I get a lot of twitches. I trying to figure that one out too. Im still kinda new at this. Any suggestion would help. Thank you Nick

[@NickBurnsFPV]

www.buddyrc.com/sunnysky-r1106-kv5500-brushless-motor.html hobbycool.com/sunnysky-r1106-5500kv-6500kv-8000kv-brushless-motor/ www.ebay.com/sch/i.html?_from=R40&_trksid=m570.l1313&_nkw=sunnysky+r1106+5500kv&_sacat=0

[@geoten6333]

Thank you Nick.

[@123jah]

Witch one to choose for beginner: This one or the pocketquads.com

[@NickBurnsFPV]

I really think this. The traditional carbon fiber is the way to go and will allow you to fly when the wind kicks up a bit. The pocketquads needs more testing in other pilots hands. The durability was good for me, but over time we will find out if that holds true for many. And repairs or transferring the electronics of the pocketquads to another pocketquad frame is going to be challenging.

[@lucky1968]

nice

[@afiqaFaT]

15:18 pid setup

[@per3510]

Yes, get one.. I have two :)

[@NickBurnsFPV]

your in good flying shape then. :)

[@per3510]

Oh yea, order two by mistake but that was a good mistake. never hurt to have backup :) btw, I have the Leader also. Thank You for your channel.

[@Bamadrone]

What about the 3inch version of babyhawk?Better than the 2.5?

[@FrequentFlyerRC]

Bama Drone FPV 2.5 inch and 3 inch? The extended arms I have allows 2.5 inch and 3 inch..

[@Bamadrone]

Frequent Flyer RC There's a 3inch version coming out, think I might wait

[@FrequentFlyerRC]

Bama Drone FPV what I'm trying to say is the 2.5 and 3 inch is the same one

[@Bamadrone]

Frequent Flyer RC Lol, No, what I'm trying to say is there is a 3-inch version of the babyhawk R coming out next week !!!!!!

[@NickBurnsFPV]

I did see JD Mora posted a blurry image of something from Emax we will have to wait and see. They didn't send me one.

[@felixbrand1130]

Shiit 3rd haha

[@MrBirdshell666]

bottleopener

[@NickBurnsFPV]

I think the carbon is to thick to get a good bite on the bottle cap. :)

[@vikrambhamre5512]

First