xTool D1 Pro 20W laser engraver: The most powerful diode laser engraver that cut 19mm wood in 1 pass

  Рет қаралды 210,138

Aurora Tech

Aurora Tech

Күн бұрын

Пікірлер: 218
@linsen8890
@linsen8890 2 жыл бұрын
I love your factual, no-nonsense reviews. Straightforward, no hype, no fluff, good tests.
@MrCPogue
@MrCPogue 2 жыл бұрын
At the expense of being a stereotypical person, she is Asian! Why would you expect anything else?
@linsen8890
@linsen8890 2 жыл бұрын
@@MrCPogue That's just ridiculous. Perhaps you should re-think what you're saying, because it sounds pretty racist.
@MrCPogue
@MrCPogue 2 жыл бұрын
@@linsen8890 Racist by being a compliment that someone her age is capable of producing content of this type and that in general most Asians are pushed/driven to be professional... Take your race card elsewhere sorry if it hurts your feelings its OK to have "Emotional Damage!"
@linsen8890
@linsen8890 2 жыл бұрын
@@MrCPogue If you want to be a blatant racist, that's your problem, not mine.
@MrCPogue
@MrCPogue 2 жыл бұрын
@@linsen8890 Again, if you think giving someone from a different race than my own is being racist you seriously need to learn what being racist actually is! I would love to be able to say that about all races and people but its not true and my statement is quite notoriously true about Asians and their parents. Your welcome to KZbin it there is thousands of videos of Asian's acknowledging the fact they are pushed/driven by their parents to be professional and far more mature than what is expected of say a typical middle class white kid is! I am sorry it hurts your feelings but stating facts is not racist. Case and point: World record for youngest US Certified heart surgeon: Asian, youngest EngD Mechanical Engineer :Asian, youngest PhD Nuclear physicist: ASIAN again....
@flyingpig7203
@flyingpig7203 2 жыл бұрын
Fantastic review. Truly. Probably the best structured review of a tech product I have seen yet on KZbin (And I have been watching reviews like these for a long time). Definitely the best review of this particular product out of all the others. If your parents are not proud of you, they should be!
@SkonkBot
@SkonkBot 2 жыл бұрын
Only found your channel recently but its immediately clear that these are some very high quality reviews :) thanks.
@pantherpawz3435
@pantherpawz3435 2 жыл бұрын
This is one of the best presentations I’ve seen. Very matter of fact. Very knowledgeable. I couldn’t decide if I wanted a 10 or 20 watt but this young lady made it clear that the 10 watt is perfect for what I’m going to use it for. Thank you for taking the time to do this video. Subscription button has been hit!
@kyleniedermeier6651
@kyleniedermeier6651 2 жыл бұрын
I'm subscribing to your channel because you are very articulate and straightforward with your scripting, and I love it! This review is concise and thorough.
@MrEdsster
@MrEdsster 2 жыл бұрын
Absolutely awesome. I usually fall asleep with these kinds of videos. You were to the point and didn't spend so much time telling us how smart you are. That is obvious.
@aps3000miki
@aps3000miki 2 жыл бұрын
Even I had my flame sensor set to high, you managed to set me on fire for this laser engraver. Great review, very informative. I would have liked you cut/engrave more materials like acrylic, leather, cloth or PVC but I am aware you have to draw the line somewhere. Thank you Aurora and Helios for this very informative review.
@TinkeringJohn
@TinkeringJohn 2 жыл бұрын
I just bought the 10w D1 Pro and RA2 rotary tool bundle from MakeBlock on Amazon. This is my 1st laser machine. After figuring out what power and speed to use on the material you’re working with, it is easy to use. I had an issue with the RA2 and Alex from MakeBlock gave me excellent support and kept me notified on what they were doing to correct the problem. I also bought the air assist and honeycomb bed which also comes with a metal plate to put under it to protect your table. I have the extension rails coming that doubles the length of the work area. Thanks for the review.
@ptman3
@ptman3 2 жыл бұрын
This channel should have WAY more subs. I used one of her videos to build my PRUSA. It was, BY FAR, the best build video I could find. The clarity, editing, videography, presentation and detail are really outstanding. I'm going to look for her Patron because this talent must by supported.
@revelationfulfilled5193
@revelationfulfilled5193 2 жыл бұрын
I am truly impressed by your detailed review! I do not come across many reviews so informative as this! Great job thank you.
@christopherlee3026
@christopherlee3026 2 жыл бұрын
I so wish you had been my Teacher at school, you explain every thing so clearly , I will be learning a lot from you channel. Keep up the great work !
@Murasame
@Murasame 2 жыл бұрын
You went from number 3 to number 5 in counting the cons of the laser. I prefer informative videos so well done!
@jeffthomas7383
@jeffthomas7383 2 жыл бұрын
Excellent review and answered many of my questions. Deciding between 10W and 20W. I think I will go with the 10W. Seems it is the best overall value.
@clausloeso4134
@clausloeso4134 2 жыл бұрын
Just came across your channel today, i nearly dismissed it when I saw that you was just a kid.. I'm happy that i didn't 😀.. you actually makes better content than most adults... Never judge a book by its cover.. 😆. Keep up the great work..
@southwindswoodworks8260
@southwindswoodworks8260 8 ай бұрын
This is an EXCELLENT review!!! Thank you so much for your no-nonsense , to the point examples with pros AND cons. This has helped be tremendously. :)
@laseranddiy-cq5jf
@laseranddiy-cq5jf Жыл бұрын
love the way you made this. very detailed and slow, easy to watch and understand.
@millionmilerclub
@millionmilerclub Жыл бұрын
I made the mistake of buying the 5w, I am now upgrading to the 20w that I found on woot for a huge discount. Thank you for your video as it helps a lot for my decision and education n the product.
@firemanCA148
@firemanCA148 Жыл бұрын
Very impressive. I now have a good understanding of witch Laser I need.🤓
@freestylekyle
@freestylekyle 2 жыл бұрын
You’re always so Thorough in your reviews, I love it.
@stevescott1280
@stevescott1280 2 жыл бұрын
You are probably the best reviewer on KZbin. 👍
@ChadsCustomCreations
@ChadsCustomCreations 2 жыл бұрын
I am extremely impressed by your review, just found your channel today and I am looking forward to checking out more of your work! Much respect.
@shinranews
@shinranews 2 жыл бұрын
Wow! You were born for this kind of video review. Your talent is astonishing. I almost didn't watch, because I made the mistake of judging a book by it's cover. (You appear extremely young) That would have been an unfortunate mistake. This was simply among the best reviews I have seen. I'm subscribing! Thank you for such a well thought out and exceptionally produced video.
@havocproltd
@havocproltd 2 жыл бұрын
WOW!!! Great video!! I mean, wow! I've already ordered a d1 Pro with the air assist and tumbler but if I hadn't. I would have been sold after this! Oh! And i think you're adorable!
@MrTidus1492
@MrTidus1492 2 жыл бұрын
I'd be interested in seeing cutting paper with very intricate/small details for making airbrush stencils.
@laszlofabian
@laszlofabian 2 жыл бұрын
Best review i've seen since a long time! clean, crisp and on topic, congratulation and keep up the good work!
@quietprolink5322
@quietprolink5322 Жыл бұрын
Clear and concise. Can't ask for better. Thank you for sharing.
@welovechoccy
@welovechoccy Жыл бұрын
Best xTool D1 Pro review I've seen. Thankyou very much
@smartassist9700
@smartassist9700 2 жыл бұрын
Best Presenter / Reviewer “ever”…is you! (And I traveled the world in business!
@benz862
@benz862 2 жыл бұрын
One of the best reviews I have ever seen, regardless of the product. Well done, it's greatly appreciated.
@oscarmayorga7461
@oscarmayorga7461 2 жыл бұрын
You are the best reviewer thx for all the info!
@skyrider4789
@skyrider4789 2 жыл бұрын
Impressive. Most impressive. Great and thorough as usual. 👍Thanks for the great review. I'll check out the affiliate link. This one may be the one I buy.
@sljack1671
@sljack1671 2 жыл бұрын
Terrific video! You have given me confidence in buying the 20W version. Keep up the great work!
@grim789
@grim789 2 жыл бұрын
I thought an adult was making this. Great job super impressed this video is really helpful learning my new machine.
@love1nallgivespower923
@love1nallgivespower923 2 жыл бұрын
You have the best video out in this machine. Thank you so much 😊
@Mobijub
@Mobijub 2 жыл бұрын
That's an excellent review. Thank you. Definitely the price was setting me back in buying one. Great review!! Thanks again!
@nmsar
@nmsar 2 жыл бұрын
Thank you very much, you made it much easier for me to select the appropriate . Keep up the good work.
@andrewhesling7875
@andrewhesling7875 2 жыл бұрын
Excellent demonstration, clear and consice.
@10740075
@10740075 2 жыл бұрын
the best review and informative video ever for this machine , thank you so much
@NeoDon1
@NeoDon1 2 жыл бұрын
So So Happy I found this channel. You are a great teacher and you do wonderful work thank you. I am subbed and liked. You make it easy to understand the technical aspects as well.
@ibmerlin2
@ibmerlin2 2 жыл бұрын
Love your channel and reviews. But I had the 10 wat version of this and could not get the wifi to work correctly and the customer service was terrible. I finally sent them a link to a KZbin video which they never even looked at. I sent it back and am getting the adamstack 20 pro.
@bobr9731
@bobr9731 2 жыл бұрын
Just found your channel. What a professional product review. Thank you.
@sknopster
@sknopster 2 жыл бұрын
I found your videos to be very informative, and your "just the facts" format is much appreciated! I'm hoping you could point us in the right direction and/or make a recommendation considering the following: We seek a sub $2,000 Laser Cutter / Engraver to produce our aluminum face plates; either anodized or plain (6061-T651). Although, as much as 25% of our production could include: 303 Stainless Steel, Mild Steel, Brass, Copper and if possible some plastics; PVC, Polyethylene, ABS and Kydex. In general our work would involve material thicknesses not exceeding 10mm (0.375"), with approximately 80% of production limited to 4mm (0.125") or less. In many cases, the engraving would be filled with ink, enamel, paint or more exotic materials. We intend to use the machine to cut the outline and "drill" mounting holes. Can you point us in the right direction? Or, alternatively feel free to tell me if what we see is not yet available as a laser machine. Thank you in advance, I look forward to your reply!
@zzaacchh
@zzaacchh 2 жыл бұрын
For under 2k??? add a couple zeros
@AngelDiva
@AngelDiva 2 жыл бұрын
Great information and you kept my attention during the entire video. Thank you.
@Animalwon
@Animalwon 2 жыл бұрын
Excellent review. I especially appreciate the presentation of facts, read in a mature sounding voice. There are too many reviewers (probably twice your age) who are too fast with equally screechy voices or too slow in their presentation speed and sound like they are mumbling requiring me to raise the volume on my KZbin player. I am excited by these HIGH POWER (20 watt-?) laser modules and wonder if you will ever consider a side by side comparison of the various 20 watt laser modules to each other, independently from their respective machines? Great review, btw!
@onefinity-trainingtipswithMitz
@onefinity-trainingtipswithMitz 2 жыл бұрын
One of the best and thorough reviews I’ve seen!! Thank you!
@halojump123
@halojump123 2 жыл бұрын
WOW!!! That was an EXCELLENT review!!!
@ellanwood
@ellanwood Жыл бұрын
Great videos as always , also love the supplied info in cutting and engraving
@WarJakEnterprises
@WarJakEnterprises 2 жыл бұрын
Hi, thanks for the great review. I purchased my D1 Pro 2 weeks ago & have been mainly using Lightburn. I had a question about the test burns you did? Are those within Lightburn or is it a file I can download?
@RB-yq7qv
@RB-yq7qv 2 жыл бұрын
A very good review. When doing your reviews could you please test the cutting qualities on PVC sheets. Many model builders use this material.
@kraka2381
@kraka2381 2 жыл бұрын
I thought cutting pvc with a laser was dangerous as chlorine gas is produced?
@AuroraTech
@AuroraTech 2 жыл бұрын
Yes, you are right, I won't use it to cut plastic.
@AngeloJJ
@AngeloJJ 2 жыл бұрын
@@kraka2381 And? I don’t know how, but every time I look through the comments of a video someone is pointing out some safety hazard. Just let’s me know who’s pro and who’s not…😊
@jerrysimeone
@jerrysimeone 2 жыл бұрын
Hi thanks for the great review. How well and how fast will it cut through 1/2 Baltic Burch plywood? How many passes? Thanks
@JoshForeman
@JoshForeman 2 жыл бұрын
Wonderfully thorough review, great work!
@jarodmorris611
@jarodmorris611 2 жыл бұрын
You didn't try the faster speeds with the air assist. Everything I've seen and read says that the air assist makes a huge difference in speed and quality of cut. I wonder if you could get the 1,000mm / min with air assist.
@williamwoo1437
@williamwoo1437 2 жыл бұрын
Great review 👍. You are clear and concise and to the point. And I was from RPI in the '70s🙂
@K40Keller
@K40Keller 2 жыл бұрын
Nice Video! Thank yoiu very much! I love the xTool D1 Pro !
@theshepherd8036
@theshepherd8036 2 жыл бұрын
Great review! I love your in depth explanations. I have an xTool D1 Pro and I am hoping I see the comparison with the Sculpfun S30 pro max 20W
@yeroca
@yeroca 2 жыл бұрын
Nice job! A 20W laser is very dangerous, so it's important to remind people how lethal these can be if appropriate caution isn't taken. Just out of curiosity, have you had any wood catch fire during the engraving process? A suggestion for a future review: review an enclosure for the engraver that contains an internal filter that would eliminate the need to vent to the outdoors.
@JanetDiaz6152
@JanetDiaz6152 Жыл бұрын
Great video.....Thank you. Im been searching , and one of the projects , i want to do is custom rubber stamp. Would this machine do what i need ???? Can you do a vid if so . Can Anyone shine in and tell me how i can go about doing this.
@Steelichi9
@Steelichi9 2 жыл бұрын
Great video! I am seriously considering adding one of these diode lasers to my shop. I was wondering if you or anyone else here knows approximately how long the actual laser lasts and is it costly to replace when it is time for a replacement? Thanks and keep up the great content!🤙🏼
@Chris-xh4hw
@Chris-xh4hw 2 жыл бұрын
Great Review. Could you do a comparision between the standard diode laser module and the infra red module, when it becomes available ? [Pre-order] xTool 1064nm Infrared Laser Module - Infrared laser module for plastic and all-metal engraving.
@FPVREVIEWS
@FPVREVIEWS 2 жыл бұрын
How would it compare to a 100w CO2 laser cutter such as HL1060g?
@frankb.3556
@frankb.3556 2 жыл бұрын
Fantastic no-nonsense review! Thank you. 👍
@dmstrat
@dmstrat 2 жыл бұрын
Excellent work, great review. Could you add a review on its ability to cut acrylic between the new infrared laser and the blue one as well as engraving of metals between the two?
@notbadsteve
@notbadsteve 6 ай бұрын
Thanks for the no waffle video. I have a question. I haven't used one before. Are there costs that i haven thought of. For example replacement parts required after a short time. Thanks.
@attilaerdos7405
@attilaerdos7405 2 жыл бұрын
I love watching your performances😘
@jeanninecannito3632
@jeanninecannito3632 Жыл бұрын
How do your settings translate when using the xtool creative space? The xtool space require you set 1. Power in %. 2. Speed. 3. Passes for the really thick wood?
@maxim7718
@maxim7718 2 жыл бұрын
Hello, I notcied that you haven't made any video on the laser upgrade for the ender 3, could you review kit or another 3d printer upgraded to a laser. Love your videos, thank you.
@ChrisRivelLife
@ChrisRivelLife 2 жыл бұрын
Really nice review! Keep up the wood work, waiting for our 10 w version to arrive 🤩
@javilarg
@javilarg Жыл бұрын
Thank you for such a fantastic review.
@p39483
@p39483 2 жыл бұрын
Excellent reviews. Please add elapsed time in time lapsed parts.
@JORGINHODONASCIMENTO
@JORGINHODONASCIMENTO 2 жыл бұрын
WOW! I am impressed by your knowledge, patience and calm. Do you have an input on the Sculpfun S10?
@laurielahr1022
@laurielahr1022 Жыл бұрын
May i ask a question on the xtool software, is it possible to "cancel" a laser job vs only pausing and resuming it?
@SiddharthDoshi
@SiddharthDoshi Жыл бұрын
Hey, can you also do review on LaserPecker 3 or 4?
@almaespinosa4505
@almaespinosa4505 2 жыл бұрын
Hello! I am having issues with my Xtool D1 Pro Laser. I received it and tried it, the first try was perfect. Then the second time I tried it wouldn't work. The laser would move around but the laser light barely had any strength. It would move around as if it was doing the job and would take the amount of time the project would take, however there were no marks on the plywood or anything and the light was very very weak. You could barely see. I emailed customer service and it has now been a 3 month battle or recommendations and changes they want me to make which I have but nothing has solved the issue. I went ahead and tried another laser head which is the one for metals. I did 1 dog tag that came out beautiful. I went ahead and tried to do another dog tag....same thing happened....the light was too weak barely visible, the laser would move around as if it was doing de project but nothing would engrave. I didn't change anything on the setting from first project to second. I was working with pre establish material settings. Power speed and all was verified and still nothing. Do you have any idea what it could be or how to fix it?
@JV-uy7ex
@JV-uy7ex 2 жыл бұрын
You have an amazing voice 🥰🥰🥰
@joeboxter3635
@joeboxter3635 2 жыл бұрын
Please do review of the Flash Forge Adventure 3. Interested, but worried that it has no bed leveling. Also compare to Ender 3 V2.
@zyhon881
@zyhon881 2 жыл бұрын
Hi, thank you for your video. Can you cut foam with this machine?
@anticsgarage5230
@anticsgarage5230 2 жыл бұрын
Excellent review! Answered a lot of my questions..
@avejst
@avejst 2 жыл бұрын
Fantastic review to the point Looking like a great product. Thanks for sharing your expirences with All of us 👍😃
@Jibs-HappyDesigns-990
@Jibs-HappyDesigns-990 2 жыл бұрын
as always very helpful! nice rig! am very pleased 2 see it perform! good luck!
@MyGrowthRings
@MyGrowthRings 2 жыл бұрын
Well done, as usual.
@queencityteashop
@queencityteashop 2 жыл бұрын
Very thorough! Would you recommend this Xtool I just wanted to do powder coated mugs and rings/jewelry or is something more economical available?
@StaleyKeck
@StaleyKeck 2 жыл бұрын
Great in depth review, thank you!
@84fireice
@84fireice 2 жыл бұрын
I’m new in using a laser what laser machine would you recommend? I will be using wood, acrylic, possibly plastic and glass. I’ll be engraving and cutting.
@smartassist9700
@smartassist9700 2 жыл бұрын
I make aluminum signs. Same thickness of 12 inch by 24 inch street signs for drivers in neighborhoods. They are thin but I do not know thickness. They are sturdy, and do not bend easy. Can you try cut out a 12 inch x 18inch aluminum or thin steel?
@jaysonpadayachee1609
@jaysonpadayachee1609 2 жыл бұрын
Great review! Compare to the Atomstack X20 in a next video please. Thx
@traveller4738
@traveller4738 Жыл бұрын
I’m curious to know, after all the laser engravers you’ve reviewed and used, which one is your favourite? I’m thinking of getting the xtool 10w but also like the ortur as well. Thanks for all your videos, you make easy to follow and offer great unbiased information. Many thanks
@brianfoster7064
@brianfoster7064 2 жыл бұрын
I appreciate and enjoy your videos. This piece of equipment interests me. What is the largest diameter the rotary can handle?
@jimbrown1388
@jimbrown1388 2 жыл бұрын
I too purchased the D1Pro 20W But I can not get it to Connect to LightBurn. All works fine in the xTool create but when I try to use LightBurn it will not Frame. When I look at console it says waiting for connection. I just don't know what to do. Can you help me?
@impressiveprints73
@impressiveprints73 2 жыл бұрын
Yoooooo this kid is flipping good!!!
@notsecure
@notsecure 2 жыл бұрын
RPI 200 years! Are you guys near TROY NY?
@daimyo2k
@daimyo2k 2 жыл бұрын
Great video! I have a question, what are the numbers and hashes on the right side of the laser right in front of the "kickstand"? What is it used for and HOW is it used?? Thanks =]
@ronmoore276
@ronmoore276 Жыл бұрын
Can I put a door under the xtool so the Lazer will reach?
@spiritseeker2831
@spiritseeker2831 2 жыл бұрын
so which 3d printer would you recommend ? i like your style
@LostCloudx4
@LostCloudx4 2 жыл бұрын
Insane! My neje Master 2 20w takes about 10 passes at 80% to cut 3mm ply ffs!
@TheLouisianaHobbyGuy
@TheLouisianaHobbyGuy 2 жыл бұрын
That's because the Master 2 is 5W, not 20. 20W is the power consumption, 5W is the optical output.
@shinjusmith5293
@shinjusmith5293 2 жыл бұрын
Amazing review, very helpful. Thanks!
@higherstandardspc
@higherstandardspc Жыл бұрын
Well done and informative, Thank You for review : )
@stormelemental13
@stormelemental13 2 жыл бұрын
I've successfully engraved marble with a 60W CO2 laser. I'd be curious to know if this 20W Diode laser can as well. Is that something you might test out?
@slick11nick1
@slick11nick1 2 жыл бұрын
Thanks for the review. You said that the end switches are accurate. You should add a "move by hand, use end switches and engrave the same fine writing again" test. In a other test I saw that the end switches are not that accurate. Can you confirm?
@verrezen
@verrezen 2 жыл бұрын
There is a memory card slot on the MB, no?
@SymbolRudolf
@SymbolRudolf 2 жыл бұрын
Excellent review. Thank you.
UFC 310 : Рахмонов VS Мачадо Гэрри
05:00
Setanta Sports UFC
Рет қаралды 1,2 МЛН
IL'HAN - Qalqam | Official Music Video
03:17
Ilhan Ihsanov
Рет қаралды 700 М.
“Don’t stop the chances.”
00:44
ISSEI / いっせい
Рет қаралды 62 МЛН
When you have a very capricious child 😂😘👍
00:16
Like Asiya
Рет қаралды 18 МЛН
Make high quality PCB's at home
12:44
Lasers and Saws
Рет қаралды 114 М.
Will a Diode Laser Engrave Steel? | xTool D1 Testing
32:49
Clough42
Рет қаралды 216 М.
How To Make A Box - Full Guide - XTool D1 Pro 20W Diode Laser Cutting Project
17:00
28 Reasons Why THIS Should Be Your First Laser | WeCreat Vision
14:14
Make Something
Рет қаралды 69 М.
(DON’T DO THIS) to Your Laser The XTool D1 Pro 20w
11:43
Chads Custom Creations
Рет қаралды 80 М.
Is this the new KING of AI depth maps for laser?
16:28
Justin Laser
Рет қаралды 51 М.
Mastering Xtool S1 Laser Engraver: Inlay Techniques and Best Settings
16:40
Sawdust and splinters
Рет қаралды 53 М.
The BEST way to Laser Engrave Coasters
22:10
Rem Thompson's Maker Shed
Рет қаралды 27 М.
UFC 310 : Рахмонов VS Мачадо Гэрри
05:00
Setanta Sports UFC
Рет қаралды 1,2 МЛН