Noooo keep the original garden state plates. Every time I see original plates makes the car way cooler.
@mikezog10303 күн бұрын
Agree custom plates might as well all read "dickhead".
@harrisson_reed28442 күн бұрын
Had the exact same crack around the whole radius arm mount in my 80. It's because of the polyurethane bushes. They are too stiff and don't allow the diff to flex as much and cannot absorb vibrations as well as rubber bushes so the vibrations go through the mounts instead. I welded the crack all round and went back to rubber bushes and haven't had a problem since.
@TheTorkerman3 күн бұрын
Get fresh ‘green plates’ from VicRoads. She deserves it
@PeterGibson-z8f3 күн бұрын
In my opinion 80's look heaps better without all stuff hanging off them, with just a nice bullbar, lift and decent tyres; no roof rack or big mirrors. But in saying that you have to compromise looks for usability when wanting to do touring trips like yourself. I think keep it as simple and clean looking as you possibly can, making sure all the accessories tie in together with the same styling and have practical reason to be there, if not, don't put them on. Less is more, in aesthetics and performance (reduced weight).
@Trevy2223 күн бұрын
OG plates are sick. Adds character
@in_sightoutdoors3 күн бұрын
Gonna be a good build. I can already tell it's gonna be a sensible build, unlike all those other channels with their "budget builds".
@anthony.grisan3 күн бұрын
I would get the garden state plates redone to new in the exact format. Looks great. But if you go personal why not!
@jamesforrest023 күн бұрын
I agree
@gettingouthere3 күн бұрын
Definitely new old school garden state plates!
@whatyabloodyonabout2 күн бұрын
When you get your diff fixed/swapped out, bace the diff & your chassis at the steering box & panhard while you're at it. Checkout the ramptcustoms kits. You can run the standard toyota steering box.
@pht0332 күн бұрын
Check the steering box mount if she is a pre 93 chassis they will crack there to. Looking forward to this build my 80 is alot like yours and needs some loving.
@nolz2623 күн бұрын
Diff solution: Send diff to kinsela customs and have him put on flipped radius arms 👍🏻 Better clearance, fixed crack and better handling and flex
@speeddemon43123 күн бұрын
I was thinking designed and built.
@tiamarie177Күн бұрын
Won’t pass engineering if it’s ever stickered
@nolz262Күн бұрын
@@tiamarie177 just swap it would only take a couple hours 🤷🏻♂️ Nothing on the car is stock and doubt it’s engineered so can be defected either way
@monarofreak72 күн бұрын
Cracking around the diff radius mounts are super common when you run poly bushes instead of rubber. Mine crack and I swapped the bushes back to rubber and welded the mount.
@Redman33543 күн бұрын
While you're checking for cracks, remove your steering box and check for cracks in the chassis. Also around the panhard mount on the opposite side rail. Worth bracing both areas whether it's cracked or not.
@PeterGibson-z8f3 күн бұрын
upgrade to gu box
@einfelder82623 күн бұрын
@@PeterGibson-z8f Upgrade to GU :)
@GeertB842 күн бұрын
Indeed, important to check that area! My chassis was cracked around the steering box. Upgrade to GU box isn't really necessary for a tourer. You can put in a later steering box from a 105. Has a thicker shaft. That is plug and play
@hamishmccracken988122 сағат бұрын
Keep the 80! Go hard. Give the girl a make over. Love seeing what you are going to do with it. She's done you proud. 105s and 80s are the best!
@nicklaane54912 күн бұрын
Kinsella flipped arms will give you castor correction plus new arms and remove the cracked mounts for the new arm mounts. There’s a measurement you need to do before you take your diff out though.
@davidmilledge2212 күн бұрын
Great to see the old girl getting some love there the last off the best she bloody deserves it mate good on ya 👍
@cwilliams42272 күн бұрын
My 80 front diff cracked the same. I was told too much stress from offset bushes and polyurethane. Mine being factory locker replacement was not an option (different housing) so I had a guy weld her up. He added heaps of reinforcing. She aint gonna crack again. Maybe hit up Performane engineering for a set of offset radius arms. I also had cracks around the steering box and the panhard rod support. Its a good time do those.
@justinfreeth14552 күн бұрын
Very exciting to see another build. Will no lie, when I saw the video I was excited with the possibility of an engine rebuild.
@johncarter54282 күн бұрын
On the new build I would recommend a stedi light bar mounted under/on the front of the roof rack. We have this on our 100 series and it works amazingly.
@MicahBell_18603 сағат бұрын
OZI 80 & we can be twins! I have Qld rego I bought Sahara headlights on Ebay & they are a great improvement. Then I put in LED globes. Even better. A lightbar on your roof rack & a couple under headlights in front of original indicators for floodlight, plus 2 HID spotties in front of grille for distance.
@MitchDenham3 күн бұрын
Keep the OG plates! In my experience, roof-mounted spotlights/lightbars don’t seem to actually help illuminate the road ahead, I’ve tried a few different roof light setups and I’ve returned to simply just bar-mounted spotlights (mine are from Aldi lol). I was just wondering when the 80 would see a similar build to Liam’s Patrol the other day, so I’m keen as for this series!
@jesspridmore44842 күн бұрын
Excited for this rebuild! I reckon keep the original plates, they've got lots of character and it will be cool to see a sick redone 80 with og plates!
@ManzoGee121603 күн бұрын
Its about time now for the 80series to receive some TLC. I am so happy that the legend 80series will get a new life. 👍💪💯
@gen1c8rs88Күн бұрын
Maybe some 35x12.50r17 YOKOHAMA GEOLANDAR G017 AT XD, or 315/75r16 YOKOHAMA GEOLANDAR G003 MT(taller than the 35x12.50r17) or 35×12.50r17, or Kumho MT71 in 35x12.50r17(1mm deeper lugs than the 315/75r16 ) or 315/75r16 for more off road capable tread block design that's ok for touring. Method Bead Grip wheels would be mint✍😉.
@BigRedGQ2 күн бұрын
Lovin this rebuild boys! keen to see how youse go with the respray!!
@peterpichelmann89222 күн бұрын
It will be good to see what you do, I had one of the very first 80s to come into Australia, same colour as yours, had it for nearly 20 years, did the respray and refit back in 2000, great truck then, still great today. Shame I sold it.
@Rohan_Martin2 күн бұрын
For lights replace your factory headlights for led ones you won’t regret it
@lachlanshanahan93663 күн бұрын
i love the look of those led cube lights mounted ontop the car on the roof racks
@Tonez1882 күн бұрын
Gonna be an awesome build mate! Should definitely make longer vids on the next few with more of removing parts and prep!
@pattywoods8089Күн бұрын
Kinselas custom flipped radius arms i run them they are amazing Castor correction bullet proof amazing flex
@HardUNduro3 күн бұрын
Awesome video lads. Can't wait for the rest of the build. Muscle 💪 👍
@gqwarrior66943 күн бұрын
Spotties with 12" slimline light bars mounted beneath the headlights on the bullbar. Pro tip: Put grip tape in strategic places on your bullbar, rear bar & sliders. Eliminates the muddy boot slipping we all know so well
@cameronlylekiki5067Күн бұрын
Can’t wait for part 2 of this 🔥💯
@wpc39382 күн бұрын
Wider factory looking flares from FRP look awesome on the 80's. AR40 light bar from ARB would be great addition to the Bullbar.
@australis_escapes3 күн бұрын
I’m a big fan of period correct builds! Love the red so keeping the same colour gets my vote, plus some repro garden state plates. I don’t doubt that you’ll keep the build tasteful and practical Patty! Maybe with a few nice modern touches. Love the channel boys, keep it up!
@brendangregory6829Күн бұрын
Keep the OG plate and for the diff you'll be able to get a welder to come fix that and brace it up even better. had a similar issue after I did a half lap in my landy D2.
@hititoffroad45452 күн бұрын
From memory, you put castor bushes in? When you did the lift. They can cause enough stress to crack that mount, which is why replacing the radius, to correct castor is the better option
@fatmanoverlanding2 күн бұрын
Someone or something out there was looking after you. 🍀Very lucky to find those cracked suspension mounts now while you're rebuilding your 80. 👍
@trackhack81712 күн бұрын
Are you going to re-paint or smooth things out and wrap? Wrapping is quicker and cheaper. Diff mount cracking when using offset castor bushes isn't uncommon, nor are chassis cracks where the steering box mounts. It's VERY easy to go over GVM on an 80, so this is an opportunity to be creative and save some weight when putting it back together. Good luck!
@benshaker253 күн бұрын
In terms of your front lighting it would be worth looking at some JW speaker drop in LED headlights. TLC 4x4 in the states seem to use them on all of their landcruiser restorations. Keen to see the rebuild take shapes boys. Good work!
@4.2touring803 күн бұрын
I had my front differential do the same thing cracking on the radius arm mounts had them welded up but it’s in the prep work an brace them up it will be great
@kristofferwilliams99633 күн бұрын
Polly caster correction bushes are the worst for the cracking. Look into some custom castor corrected radius arms. The Black Hawk arms look good. Ill be going that way myself. And yeah keep the green old school number plates, way cooler.
@louiskudlak22413 күн бұрын
Looking forward to the end result, so much to take off, I wouldn’t have the time or patience , good luck
@davidlovell43903 күн бұрын
Looking forward to this series!
@Kristianmac4263 күн бұрын
Black and White plates for sure, no words, something simple like AA 420. And definitely paint it in the original colour, no raptor etc. and paint the door handles red, and black around the side window frames. Bull bar, side steps, rear bar, flares etc all satin black too. The black and red combo will look clean and not too busy.
@Redman33543 күн бұрын
AUSRVO plates are available. Just saying....
@JohnErnstP762 күн бұрын
Love the patina of the old plates keep them.
@task8219 сағат бұрын
Can't wait for this build 💪💪
@toddstrelow12133 күн бұрын
The 80 series came out in a beautiful dark green colour. I reckon you should go a full colour change!
@jordanlayton60122 күн бұрын
The cracks on your diff is from offset bushes they don't have enough room to flex they just bottom out and rip on the mounts causing them to crack
@craigtomkinson28373 күн бұрын
Lovely ep. That's normal for a 80 series with hard Neoprene bushes in the arms, I ve welded mine up twice over the years and i added extra plates and bracing around them plates and run softer bushes now had no troubles since
@jcramond732 күн бұрын
In regards to the diff, maybe a look at suspension bags to help with the stress?
@Zekriax2 күн бұрын
Paint the 80 white! Like either a pearl white or a white that has a nice gloss and can put up with bush driving. Maybe PPF after you're done with the paint job ?
@lochiemacdonald94052 күн бұрын
The cracked radius arm mounts is caused by the offset bushes they don't allow enough movement, is fairly common
@HowdidIgethere-so2cr3 күн бұрын
Sliders with a rear hoop before the rear door is unreal. Best thing i did on my GU
@shimiono2 күн бұрын
Give and take situations when using a caster correcting bushings. Common problems with cracked bracket mounts after multiple flex.
@artofcisum_official12943 күн бұрын
Do a complete rebuild like Liam's Patrol plus xtra mods..Can't wait to see the final built😊❤.
@SeanClaffeyКүн бұрын
Dual cab chop & chassis extend like my red one you saw at Brisbane show n shine 😉
@leviwilkinson19243 күн бұрын
Keen to see where this goes!
@findingselfagain40143 күн бұрын
Dudes great to see the best 4x4 ever built get some TLC, So I have a late 92 Turbo in the solid red colour (it fades faster than a setting sun) So I had the motor blueprinted to genuine and wow what it is like to drive a genuine 12 valve thats stock. I imported so many of the parts I needed from the middle east, This included all relivant engine and fuel components, My superviser on the rebuild said no non genuine so thats what I did. But I also inported all the rubbers for the flairs. So with engine out they where overhauled. to new. I have a intercooler on the front (safari) and this too got all new hoses and an overdue flush. As for paint I am still undersides on a wrap or paint, and if paint put on a gloss clear? So My tip is keep it genuine, the rubbers for the flares are stunningly made, Door seals and all sealing components special. The only non genuine part is the starter motor and after seeing Dans demo at the 4x4 show I will get a genuine and carry the outer as a spare. I know the engine is on the agenda, dont do the conversion to the 24 valve, I have a 79 series FTE and the confort level of the motor for cruising in a tourer is not worth, rebuild the original to new, just do it with a good builder. AS for fuel you have that sorted. Exhaust I put the legendex on with your recommendation.
@leftardtroller3 күн бұрын
You had the motor blueprinted mate these are blueprinted from factory you can get all the specs from toyota
@leftardtroller3 күн бұрын
These are already blueprinted from factory you potato can goto toyota and get your factory specs 😂
@davidmilledge2212 күн бұрын
Custom plates yer go for it gives it that extra touch and their yours 4 ever mate 👍
@chrishiggins18112 күн бұрын
You can customise the plates you have atm, so you can keep the same ones and just get the green and white again. I’m looking forward to this LandCruiser being built again
@backwoodslogging84432 күн бұрын
Bummer about the diff . As a boiler maker. The cracked started in that bottom corner as it was a sharp angle if it's more rounded it spreads stress better. Always radius corners. And check the steering box they can crack around there too
@ddridan3 күн бұрын
Rampt customs do a nice brace kit for the steering box/panhard mount area. Would be well worth doing while its off the road even if its not already cracked. For housings see if Dwiz can hook you up 👌
@Mouldyturnip753 күн бұрын
Awesome video, stick with the OG plates, they really suit. I can see this snowballing into something that takes 3 x as long and costs 4 x budget - but 100% worth it. Can't wait to see the old girl finished. In regards to lights, a set of FyrLyt MOFO with billet bezels will look amazing and perform like no other LED.
@cyclemoto87442 күн бұрын
Thanks for sharing. Cheers
@izzys80123 күн бұрын
Cracked front diff mount is cause by polyurethane bushes in the front arms they don’t flex like rubber bushes causing stress on mount. Can buy kit from ramps customs to brace it up
@scottdonna2690Күн бұрын
standard optioned crack.. no big deal weld it up and psr brace kit ... have welded heaps of them over the years
@grahameroberts81093 күн бұрын
Wheeling with Tyler Thompson is ‘at your 80’s peril’.
@liamrussell91033 күн бұрын
New custom black plates for sure!!
@databasebaseaustralia20963 күн бұрын
Suggest you remove front and rear windscreens to do the respray then once done refit using new genuine rubbers and it is essential to use sealant between rubber and body and rubber and glass else you will likely have water leaks.
@lawrencesmith57722 күн бұрын
When I had my GQ I always wanted "MDYTRK". I don't have a muddy truck anymore. Would be chuffed if you used it.
@plopper283 күн бұрын
keen for this one fella
@paulschofield9852 күн бұрын
The roof of my 80 series look exactly like yours 😂 (different colour) but the clear coat had flaked off.. just got it back from a full shut door respray looks brand new (for now 😂😂) not bad for a 34 yr old (1990) 80 series totally love it.. cool vid mate..
@zeMasterRuseman7 сағат бұрын
It looks like you have polyurethane bushings with an offset, that's why your diff cracked. Those things don't absorb shock well. So unless you want your diff to crack again don't use them. Use regular rubber bushes without an offset. And do the offset another way. This happened to me twice, and I went to using rubber bushes and just moved the bolt holes on the diff down a bit.
@stco24262 күн бұрын
Good stuff. Be interested to know the weight of all the bar work etc that came off. I'd guess ~250kg. Do tou know? Keep the original plates, would be my suggesation but your car, your rules.
@DunnasdundeeКүн бұрын
Keep the OG plates and put a hoopless bullbar on it 🔥
@cybermatstrikes75573 күн бұрын
castor correction bushes I think are links to diff mount cracking
@Zobby4472 күн бұрын
Put a later model front diff housing so you get the bigger brakes 😊
@nickgrech96342 күн бұрын
Ripper vid legends! Wish the vid was longer.
@natoaa2 күн бұрын
hot tip for you, the light bar mounted onto of your bull bar is illegal for it to be mounted there in Victoria, when cops wanna go defect you, they can cause its something to do with line of sight!
@rhyskeown15762 күн бұрын
Get some JTX headlights. I have them on my 80. Best upgrade so far. Pretty much don't need spotlights anymore.
@colinfiles56743 күн бұрын
Hi, I had same cracks on my 80 but had it all welded before it got that bad.
@kylepartanen32892 күн бұрын
Rampt customs makes radius arm brace plates for the diff for that exact issue
@TurtleTale3 күн бұрын
Can’t wait to see the final product! Should Raptor the bar work instead of just repainting with 1 pack paint or paying to get it powder coated. Recently did it on mine, super easy and looks a treat. Taken it out once or twice since and not even a scratch, pretty solid stuff!
@jackhood32592 күн бұрын
The cracked radius arm mounts are more often then not a consequence of castor corrected bushes I'm afraid.
@aaronhogan23712 күн бұрын
Pull the steering box, get it plated. Mine cracked the panhard mount so badly I need to chassis swap everything across. Big job that could have been prevented if I caught it earlier.
@tigermoloney36192 күн бұрын
New bullbar and different colour on the body would be nice 👌
@Alan.livingston2 күн бұрын
I can't remember if they said they were going to do it or not, but you should weigh all the mods as you put them back on. I'm not sure what actual useful information you will get, but it'd be nice to see it done up in a graphic as you go.
@OnCountryWithMick2 күн бұрын
It would be interesting to know just how much dirt is hiding in the vehicle. There would eb so much that you wouldn't know about until work gets started. As for the Plates I would stick with the Original style but see if you can get a new set that isn't trashed.
@andrewlangford883 күн бұрын
If youre doing spot lights dont block the radiator, youll notice it running a few degrees hotter all the time
@lachlan9254Күн бұрын
Get the old plates remade will look mint
@Xav.2 күн бұрын
Keep the original plates. Love the old plates which don’t have the reflecting film on them
@ga1e0john353 күн бұрын
OG plates for sure mate. Customer plates are expensive but make a car look cheap
@offugo-adventures3 күн бұрын
Rampt customs have a diff brace and radius arm brace plates to fix that issue
@meleach60333 күн бұрын
You can get your existing plates remade in the original style, at least thats the case in WA. might be worth looking into if you like that original look
@07_bt50Күн бұрын
Blutty oath legend the 80 deserves a makeover
@dannyblay40793 күн бұрын
Keep the plates!
@tobo262 күн бұрын
White on black plates with 4X4-RVO, 4X4-ARV, 4X4-AVO.