Australian Droid + Robot Explora 8WD Remote Underground Mine Inspection and Utility Robot

The Explora series of robots is the result of everything we have learned from years of playing in the underground sandpit. They are small all-terrain robots which have ridiculous amounts of traction and agility. This is achieved via eight independently suspended and powered wheels, as much ground clearance as we can manage and the right geometry for skid steering. The Explora was originally designed as a transceiver node for the much larger “Dropbear” inspection robot. These nodes are sent out in advance to establish a wireless mesh network that the Dropbear then uses to relay high definition imagery back to the ground control station.
The requirements for the Explora were size mobility and cost; it had to be small, extremely mobile and had to be at a low enough cost that it could almost be considered disposable (in a mining context). After years of experimenting with four wheeled, six wheeled and tracked robots, the eight-wheel Explora configuration has proven to be the most nimble and reliable. Realising the potential for such a platform across a range of industries, the Explora is available in a number of build configurations.
Explora P:
The 8WD Explora S is the workhorse of the Explora fleet. An incredibly agile and hardy robot designed for harsh conditions. With 8 independently driven and suspended wheels, the Explora S is able to transverse rough terrain with ease (see this link for the Explora video). A generous payload bay at the front provides balanced and protected space for sensors. It provides a stable platform for photography, thermal imaging, laser scanning, gas sensing or whatever terrestrial application you require. We have so much fun playing around the office with this robot! The Explora S kit is easy to build with an easy to follow manual (see link to manual). As it is made from structural plywood, the robot is easy to modify to add sensors, gimbals or any other equipment you need. Just cut, glue and paint. We usually run fiberglass tape around the edges to increase strength and waterproofing.
Explorer XL:
The Explora XL came to live as our mining customers wanted an “indestructible robot”. Of course nothing is indestructible in the mining environment, but the Explora XL comes close. With a fully welded aluminum monocoque body and full aluminum and steel suspension system, it is built for the most rugged and harshest of environments. The robot drives through eight independently suspended wheels driven by eight independent motors. Unlike tracked robots or belt or chain driven systems, even if one wheel gets stuck, there are seven others still driving to get you out of trouble. It is more than capable of climbing up and down staircases or steep inclines. Additional wheels can be purchased for sand, all-terrain or road. With its incredibly wide footprint, it is a stable platform to safely carry all of your payloads. With the generous mid -body positioned payload bay, it is the perfect platform for photography, thermal imaging, laser scanning, gas sensing or whatever terrestrial application you require.

[@UlrichC]

Beautiful vehicle. A daring concept with eight wheels. I hope that brings you advantages over six wheels.

[@actionoise]

isSuper......!!!!! 10++++

[@nicxonpiaso6199]

Can this be used for Underground Mine void scanning? Some mine would really love this technology to mount a 3D scanner on this robot and do scan remotely.