Nice setup and first flight video of the Autel Nano plus. I think your going to like this little drone. I didn't know you could fly it so low to the ground. And don't so hard on Marcus, I was the one holding the controller when his Nano decided to take a swim last year, LOL. Great video, and thanks for sharing Bryan.
@biketrippinwithbryan Жыл бұрын
Thanks Ron
@ShenRC Жыл бұрын
Love the orange color for a drone it looks sweet!
@biketrippinwithbryan Жыл бұрын
It does!
@Matanumi Жыл бұрын
It reflects nicely in the sun
@kenweller2032 Жыл бұрын
I just got one recently. My last drone is a FIMI X8SE 2020 and this is a major upgrade in every respect except wind handling. One thing I tried that worked great was flying indoors in a factory loft space with 10' ceilings. I shut of obstacle avoidance and it was very stable with the optical flow and no GPS available.
@biketrippinwithbryan Жыл бұрын
Obstacle avoidance really effects the handling on this and the evo 2
@kenweller2032 Жыл бұрын
@@biketrippinwithbryan I wasn't thinking of the handling exactly, just that everything would be close enough that it would be constantly activated.
@aleksmarkaerialvideosgr2824 Жыл бұрын
Beautiful Drone 😊 My friend!! Great setup and information!! Excellent test flight!! Gorgeous Drone great flight and camera!!😊😊😊
@glenesis3 ай бұрын
Hi Bryan! AWESOME info - thanks - Im considering grabbing one of these things. Sorry I am behind on viewing, brother! How are you? I hope all's swell!
@biketrippinwithbryan3 ай бұрын
All is sorta ok, this is a fantastic drone to be sure
@DRONIXAR Жыл бұрын
Beautiful 🔄⭕🔄
@biketrippinwithbryan Жыл бұрын
Thanks 🔥
@SW-Video Жыл бұрын
Too bad you didn't take any video of it flying that low. I would have liked to see how it looks from the camera POV.
@fherny77 Жыл бұрын
Hello i wish you could help me I don't know which drone should I buy if the nano plus or the Dji Mini 3 standard not the pro, I had the mini 2 and never had a problem or issue but I like the nano plus but people has said that I had problems with connection or problems with the return home and some other things can some one helped me please
@biketrippinwithbryan Жыл бұрын
Nano plus
@Barbaric_Iron Жыл бұрын
Awesomeness...Thanks for the share!😅😮It's growing on me, I like it!
@biketrippinwithbryan Жыл бұрын
I love it!
@SuperBardley Жыл бұрын
Cool vid, I like how directly you got right to the flying. I just received my Nano+ but I cannot get the darn thing to activate. It connects okay, then it directly goes into the activation routine (for warranty registration they say)(probably pending Remote ID), but it fails and the “Retry” just repeats the fail. I am totally stuck, the drone remains a brick on the ground and the controller won’t go live. Do you know to get through or around this activation?
@biketrippinwithbryan Жыл бұрын
Did you register with the app first
@SuperBardley Жыл бұрын
@@biketrippinwithbryan Thank you for the reply. Yes, I did, but that did not go so well. It turns out that the web portal registration allowed me to use letters, numbers and punctuation, whereas the app disallows the use of punctuation/symbols. So that could cause problems. Because of this, I created a second identity with a different email address that utilized the same password as I used for the app. Over the weekend I was in touch via email with the customer support. I sent them photos of the various serial numbers on the packaging and finally this morning, I received an email informing me that they had tweaked something on the back-end. I fired up the controller and the drone and it immediately went into the activation process, and it completed in a snap just the way it was supposed to, the drone flies as expected, problem solved.
@SW-Video Жыл бұрын
I just bought and received a second Nano+ because I'm so impressed with the camera and color science. Unfortunately it has a high pitch fan bearing noise that tells me the fan won't last too long so this one has to go back. It works great otherwise.
@InteractiveDNA Жыл бұрын
Good setup video there!!! For you to know, I made on my live stream two free Nano+ to Mavic 3 video color grading (LUTs) that you can easily apply on any video editor. it will allow you to control how the color of the Autel drones to look like the DJI that so many like.
@biketrippinwithbryan Жыл бұрын
I'll check it out!
@InteractiveDNA Жыл бұрын
@@biketrippinwithbryan Cool! Let me know if you have any questions how to use it.
@DroneSyndrome Жыл бұрын
“I don’t want a Marcus Crawford situation...” That was funny. That did suck though watching Marcus’s Nano drop like a fly out of the sky like that. His new one seems to be working fine now. I think all these drones do not do well flying over water overtime because the optical flow camera detects reflection coming off the water and causes issues.
@biketrippinwithbryan Жыл бұрын
His was high enough not to have that issue, sometimes shit just fucks up, case in point my Anafi which did the same thing as his evo mini
@DroneSyndrome Жыл бұрын
@@biketrippinwithbryan some things just make you go hmmm? 🤔
@jesusgjchuza6491 Жыл бұрын
Cool 🤝😎
@elektrotvtech Жыл бұрын
Nice drone
@biketrippinwithbryan Жыл бұрын
Thanks 👍
@electroddxful Жыл бұрын
That landed like a brick 😂🤣😂🤣
@biketrippinwithbryan Жыл бұрын
haha, indeed
@Barbaric_Iron Жыл бұрын
How ya doin Ray??
@electroddxful Жыл бұрын
@@Barbaric_Iron I’m doing better thanks god. Soon I be out again . Thanks for asking.
@chriswedgworth Жыл бұрын
Ruff landing 😂
@biketrippinwithbryan Жыл бұрын
HaHa, kerplunk
@jonathancrowell8349 Жыл бұрын
You said something about flying over water that low. That's really not a good idea it messes with the sensor on the bottom of the drone for one. And you asking for disaster for another. But you can try it just be ready for a bad experience.