Autel IM608 XP400 | How to do All Keys Lost on 2018 Range Rover | Training 2020

[@raphaelsanchez4797]

You are very talented and give great energy. The quality of your videos is top notch. You are an asset to Autel. I hope you and your family are blessed.

[@AutelConsultancy]

Thanks Raphael, very kind words . This motivates me to do more content. Thanks

[@E39M5SPEED]

You are 100 times more informative over that Autel sales guy. 🤦🏻‍♂️. Thanks for making this. Just did it on RR supercharged.

[@AutelConsultancy]

Thanks for the compliment. This was the reason why I started my consultancy. I would hear this 100 times . Take Care!

[@derictonomy]

After watching this video, now I feel i can make this range rover key 😅

[@stefanrizea3252]

By far one of the most professional and concentrate tech training regarding Autel IM, ofcourse in these case dedicated to Range Rover. You are the man !

[@AutelConsultancy]

Thanks Stefan for the kind words

[@KostYanuch33]

@@AutelConsultancy hi Autel 508 can do it?

[@AutelConsultancy]

@@KostYanuch33 you need the xp400 Pro

[@arnoldkumira8173]

@@AutelConsultancy bro I'm looking for your number

[@willyvelez6269]

Did a 2017 Land Rover evoque all key lost follow instructions and it works like a charm thanks Curtis for the video and your instructions

[@geelaw7606]

I’m Halifax from Ghana and really like to learn more from you and thank you for your every single teaching I really enjoy learning

[@yiannakosautomotivekeys2380]

I did a 2016 Jaguar XE last week. You need to be careful when you desolder the crystal & capacitor. It's hard to do as the solder used by the manufacturer is so strong/hard, it took me a long time to desolder it and I was worried that I might damage the crystal. I managed to finish the job two days later. At first I hooked up my programmer (XP400) and read the Flash & Eeprom file. When I went to add the key, the programmer was NOT reading the key (faulty XP400). I managed to get a second unit (XP400 pro). This unit could read and add the key fine, BUT could not write the files back onto the RFA (faulty XP400 pro). So I had to use one to do the keys and the other to write the files. That's how lucky I am boys and girls. This was my first time doing a Jaguar/Range Rover through the RFA so you can all imagine my frustration. Good luck with your attempt.

[@dashtyatg1824]

hay brother i am happy for you that booked such a risk this is life man some time you need to use you gut to get what need it. well Done an I've just brought the XP400 Pro but still im not going to take that risk unless its not really need it.

[@yiannakosautomotivekeys2380]

@@dashtyatg1824 Yes, I took the risk and with lots of difficulties I managed to do the job at the end. You have to take risks in life. I now have another experience on my shoulders lol.

[@edgardavidcespedescamargo6115]

How did you know what frequency to use ? I will do 1 tomorrow and I am a bit scared 😅

[@yiannakosautomotivekeys2380]

@@edgardavidcespedescamargo6115 Frequency depends where the car is. USA+Japan=315Mhz. Europe 344Mhz,

[@jufegar]

@@yiannakosautomotivekeys2380 433Mhz I think ;-)

[@Autodoc91]

Thank you I've been watching the videos for years finally settled on the im608 since it's can do ECU programming and key programming and I can send my customers diagnostic reports

[@tomking3942]

It would be helpful if Autel had info available like this so we can be prepaired before getting on scene. As locksmiths we are called out to make keys on site at the time of the call. Knowing that you need to solder on the board and remove components would help in advance. Your videos are very helpful

[@mrdman094081]

I haven't tried yet but it seems I could send the data as a text since the tool has a text feature. I will reply again after trying.

[@mandybaker8544]

Really! Like with this car you should put the computer on the bench and soldering required! 🙄

[@ultralock4627]

How will i "seperate myself from the pack" when your exposing a vehicles security breach and sharing it with the general public. I understand this wont stop and its mainly used to benefit your sales and business, i get it. Your placing tradd secrets for all to see along with the many others, just to sale products and services. Showing step by step instruction to the general public, this is why the dealer tool requires a subcription and security measures. Very thoughtful my guy.

[@AutelConsultancy]

Hi Ultra. Thanks for your reply and its a great question. I think this is a limiting belief . If you want to separate yourself from the pack you just need to learn adapt and learn valuable skillsets. Thats what I did. Years ago when I first started , my biggest competition was amazon. So I had to think to my self " What can I do to bring more value to my client" Selling the tool is what everyone else was doing. So what I had to do is learn everything I can about my product so I can train my clients and help them learn skills they would have never learned if they purchase online. There is enough people on the earth so everyone can work and make money .. Thats just my opinion

[@federry101chantrque3]

I think when he said ‘ separate yourself from the pack’ he meant not to be afraid of doing that specific procedure and move on! Don’t pass it on!

[@MoroccanAnwar]

trade secrets lol what about those who taught you lol ? what makes you better than everyone? theirs a saying where i come from: "Dont hate, compete and innovate"

[@DaveBrown2020]

Thank you for these videos , extremely well explained

[@dashtyATG]

You guy's making life really easy thank you so so much for all your times and advice

[@1fnjo790]

Take the RFA module out and have the customer flat bed the vehicle to the end of the Land Rover dealer service lot after hours. Try to do this unsoldering, reading , writing, and arithmetic. You fail in Solder and Gamora class and Land Rover won't sell you a new security RFA module without an LSID. You tell them the vehicle is parked in their lot ready for Freddie with the IDS, LOL

[@SuperMarioDiagnostics]

Great video. Unfortunately I've had zero luck with a locked mc9s12xet256 chip in a kvm. I'll go through my documentation to see if i missed anything, but as of yet, no dice. Thanks for sharing this 👍

[@SpeedTweaks]

That's because it doesn't work.... yet. As im sure you can see Curtis is literally just reeling off the instructions on the tool, he has never even seen let alone tried to work on a KVM. I wont judge him he is trying to sell the product and his 'consultancy' service. A bit like me deciding to start selling Stethoscopes and become a consultant to doctors. Give me a shout if you wan't to know what tools actually work on these

[@AutelConsultancy]

Hey Speed, Question for you. How do you know with 100 percent certanty what I have or have not worked on?

[@SpeedTweaks]

Good question Curtis, so tell us with 100% honesty that you have. And I will tell you with 100% certainty this tool won't do 2018 KVM. Also pretty misleading telling guys 'a new KVM is only $200' forgot to add the one of 2 methods of programming 1- Have the vehicle recovered to the dealer, wait until the dealer can do the work (not very quickly as most are currently closed), pay the dealers fee, put the customer in a car hire as you have messed up by not knowing what you are doing. Turns that 'highly profitable' into a massive loss, not only in the short term but reputation is long term. 2- Sign up to Topix, intall Pathfinder, buy JLR DOIP equipment, apply for JLR security accreditation. Boom and in 6 months you can have that module sorted.

[@AutelConsultancy]

@@SpeedTweaks HI Speed. Can you answer this question " he has never even seen let alone tried to work on a KVM" " How do you now this.

[@SpeedTweaks]

Aww bless you and your poor redirect. How about I re word it to make you feel less insecure. Add to the beginning of said sentence 'In my honest opinion'. Now your childish point has been put to rest how about the factual questions regarding the tools capabilities and and your underplaying of the damage and costs involved when people mess up due to your poor advice?

[@mrdman094081]

It seems you are getting a lot of likes and subscribes. I have a tool but I will be buying another just so I can get it from you.

[@rajushaikh9045]

Today I purchased autel 508 need some support from you, please make more videos thanks from India ♥️

[@1fnjo790]

I added an XP400 to my IM508 last year to add some European Vehicle key programming capability. My XP400 is now superseded by the XP400 Pro. Is there a comprehensive list of the year, make and model cars that have key chips that the older XP400 is not able to read or do, so I can weed out these cars , and save myself wasted attempts? When I go to function viewer to check capability by make ake , year and model vehicle, it has symbols denoting if it all or part can be done via OBD or by bench mode, but does not specify if an internet connection to Autel's server will be required, and whether or not the XP 400 or XP400 Pro be required.

[@IamKurr]

Hopefully in the next couple months, ill be able to get the im608. I dont know of anybody else in my area that offers programming of modules or any locksmiths that program mercedes or higher end keys. Thanks for the video. Great instruction.

[@AutelConsultancy]

My Pleasure!

[@wck2318]

Excellent presentation with easy to follow instructions thank you. Just subscribed and thumbs up, thank you for this.

[@AutelConsultancy]

My pleasure Im glad it helped you out!

[@derrickwatkins2892]

Great training Have you thought of doing a segment on replacing the KVM, as these are a real challenge on these machines

[@miekolock4060]

As always golden knowledge

[@Bohemianbiker1k]

I believe it is the APA109 harness on the im608Pro, same number of wires with the same labels on them!

[@Jedi_Masteren]

Great video, great job Curtis. One Question : In the video, you are telling people that they can "print" the "how to instructions" from the scanner. I treid myself to do so, here it comes! WHY can't you print or save the full instructions as a PDF file, I haven't find this possibility, the only possibility that I have found is that you can print as a Screenshot of what you se at the moment. So you have to print several pictures, this is not very genius. I would be very grateful if you could tell me have save or print the full instructions in one session 🤔🤔🤔🤔🤔

[@starkeys247autolocksmith3]

Nice video on kvm . Vvdi prog n vvdi2 been same thing for years tho, nice to know im608 xp400pro can do with easy keep videos coming

[@omarh.9375]

Good job , you explain it very nice, if you do any on hands training on the future please let me know

[@romanroman1182]

mate, what about two keys mentioned in video?

[@mannyf1841]

Thanks for the video. Update about the key cloning option would be helpful.

[@dejuinorlanzo3346]

Thank you for your time. Very helpful.

[@locartislocksmithllc.4901]

hey waht happens when the car alarm activate and the kvm gets locked can the key still be made

[@dashtyATG]

I can't get enough watching this videos over and over. But if it's not secured what's could be the different steps?

[@habibawada4775]

Thank you very much for your time. Very helpful.....

[@nsangwangwira651]

Good stuff Curtis! make alot of videos on the autel ultra

[@eduardofan357]

great job, it turns me off in buying a Range Rover too complicated

[@edgardavidcespedescamargo6115]

How do you know what frequency to use , 315 mhz or 434 mhz ? Does it say in any part of the module like cas in bmw ? Or Autel will tell you what to use? You are the best

[@AutelConsultancy]

Usually the autel has an option that will tell you the frequency of that key type. This way you will know what frequency to use

[@edgardavidcespedescamargo6115]

@@AutelConsultancy at the beginning of the video you said ‘ take 2 keys with you I’ll explain later why’ ,,, sorry teacher I am still confused why? Probably for frequency ? If by mistake I put in xp400 wrong frequency ,,,, will I have problem or it just won’t program … thank you for your answer,,, if I get this job done I will give you back {{ very scared though}}}

[@reyonwilson9334]

I love your videos

[@AutelConsultancy]

Thanks my friend. I appreciate the kinds words

[@jasonschmidt3715]

I really wish i had purchased my im608 through Curtis. The tech support that comes with the tool has been... Hit/Miss... Not that they dont know themselves but it seems like they are just not very enthusiastic about helping out. I hate to say that publicly... But i as well as my customers are very frustrated with the results and disappointed with the tech support. Im fairly convinced that the tool is a capable unit however this term i hear curtis mention, "function route" seems to be the very thing that i fail to find and i believe if i had a function route for every vehicle, id be golden... It would solve the issue. Why is there no function route listed when using the function viewer? It seems to make me more confused whenever i look at the function viewer. Also i have had multiple instances where the tool says, "success" but later i find out that it is not even possible with the im608 on the vehicle in question or i was using the entirely wrong thought process. About the operating guide, it is very helpful when it is present. But the operating guide does not seem to be present in all vehicles listed. In any case, Im a locksmith... Maybe not even a skilled one but im honest and i try to do a good job at a fair price. CURTIS, can you help me even though i have bought my im 608 from someone else? Do you offer tech support? You explain things pretty well and i think you may be able to get me sorted out.

[@rogerbrandt6678]

Try fb forum, very knowledgeable guys on there.

[@jimgarcia6824]

The autel scanner needs to be label The good the bad and the ugly

[@MrHammerj1]

Excellent

[@katanax31]

Thanks for sharing, information about the equipment please

[@AutelConsultancy]

If your serious you need to book a diagnostic tool consultation with me so I can give you a tool strategy based on your needs and also show you the limitations of the tool. Alternatively if you just have general answers you can contact your chosen supplier.

[@dukestang]

This is a great video.... I’ve had a few customers ask me to do some land rovers but was afraid to do them. You have to take the KVM out anytime you want to just add a key?

[@mrt-ee1zn]

I really don't know why Curtis not answear many questions, is like he picking from questions and some answear some not.... Maybe he not kmow? So i answear you, yes , you always have to "jailbreak" these modules, the factory protection only this way can break through!

[@ciprianfiran4190]

Super presentation 👌

[@Bohemianbiker1k]

Just Great Video Thanks for what your doing!!

[@abderalou4386]

Good explanation

[@Autokey_Security_Services]

Its always best to read eeprom first when working with secured Freescale processors... because sometimes you can corrupt data.. always remember the eeprom information is vehicle specific immo information and vin information... dflash is pretty much generic across similar vehicles... but eeprom is vehicle specific .... these programmers run crack routines that can sometimes corrupt information.... I'd rather get a good eeprom read and take my chances on the dflash.... but with this specific 2018 and up im608 will not work at all... maybe if the engineers you say that you are in contact with can change the software to emulate the key kind of like with Toyota smart key.. but actually emulate with an original looking key not the apb112 then you can say they have a working process for these models...

[@AutelConsultancy]

Hi my friend. Thanks for your knowledge. I spoke with the engineers and im trying to get a hold of the customers who did the 2018 ( and some 2019) so far. In my experience if I give a vin number to an engineer and they confirm if the function is on the tool ..99 percent of the time works. ( this is my experience) In the even it doenst work they usally send the client a patch to fix the issue .. Or they will tell me if there componant is not compadible. He said and I quote " But I can assure you that 15-18(sometimes 2019) can be done through dump mode and it works. " He also mentioned " We support FK72-XX and HPLA-XX types write key via dump with LandRover and Jaguar and have a lot of successful cases. Because it is an EEPROM job, if unsuccessful, normally the operation problems. For JPLA-RFA 2019, some vehicle use JPLA-RFA , needs to replace to chip to do the key programming. But some still use HPLA-XX which we also support. " I know the suppliers who sell the autel machines dont have a data logging service ... But if they did you can get to the bottom of the issue and fix it. Thats the process I use for my clients. Keep posting your content!

[@Autokey_Security_Services]

@@AutelConsultancy hey these people at (diagnostic-key.pl) there process is thru OBD no need to remove any modules from vehicle. There process reads data by OBD and programs an emulated original looking key.... Its very expensive there setup but it is very basic... Maybe engineers can look into it and adapt the process into IM608.. Even if Autel releases a paid version of this process I'm pretty sure any serious technicians like myself would not mind paying additional fees to be able to do like this... Its practically a ten minute job with this hardware software package....If you go to there website there is a video on the process.... And if works on 2020 rover jaguar even with active alarm.... Its verified working on forums I am member of.... Take some time and look into it...Thanks kzbin.info/www/bejne/anyYnWlofK9gmqM

[@cdmChase1]

Great video man thank you!

[@miguelinholas]

hi great video- if i screw the kvm module can i redo the same procedure with the data form original kvm on the new one

[@davidcespedes2871]

How do you know what frequency to use ? The Autel didn’t tell in any steps the frequency of the key 315MHz or 433mhz? Thank you great video

[@trscentrekeyprogrammingsho9661]

Superb information 👍❤️

[@petecassidy4181]

When you say you need the APA 106 and the APA109, is it either or? i.e. one or the other or you need both? I only have the APA109 I’m my arsenal. TIA. P.S. I’m gutted I didn’t know you even existed when I purchased mine, if I did I would of without doubt bought from you. Keep the tutorials coming please they are great.

[@mohammedbasheer7363]

Great video, thank you very much

[@nsubugaisaac7305]

Thx you so much

[@qicpic007]

Great video can you please do a all keys lost on BMW fem systems please 🙏

[@AutelConsultancy]

Thats a good idea! Ill see what I can do :)

[@tehrancarkey4508]

Brother many thanks from your video

[@waelalhadidi2087]

Great video thanks for your input Sir, Stay safe.

[@AutelConsultancy]

Thanks, will do! Well get through this!

[@ssami1724]

superb tool very very good assam

[@arnoldkumira8173]

Hie bro its Arnold i use to work by All Car Electric

[@eduardonunez5058]

That damage can cause the xp400 an obd2, as you can tell if an xp400 is damaged

[@juanpabloresendizarciniega9304]

What a great video !!!! I just have one question: what about bcm data ?? I think you need to write it too becuase some day you gonna need emergence starts, is that correct ??

[@bugsy791]

thats a good point...how do you get emergency start? its just a matter of time

[@jonathanromero8639]

Love it! Thank you so much. Can i ask? Would these steps be the same or similar using an IM1 programmer?

[@AutelConsultancy]

Possibly but my gut is telling me that tool might be limited in its coverage

[@jonathanromero8639]

Thank you much for your info, much needed. Hopefully you can answer 1 more question for me that would be of great value and be very useful to know. Can I program a key fob to a 2011 bmw 528i if I have 1 working key without having to do it on bench? Like would I be able to get the ISN number from that 1 key that works already through obd?

[@johnmichaelhall2207]

this was awesome respect t

[@gandalfcoigny9013]

Great to know!

[@MegaAlexey15]

Hi Curtis thanks for the great work. Can I use for programming used key or only tne new one?

[@Mirauge]

Please post links to where we can buy the crystal quarts capacitors please. The correct ones for these boards

[@edgardavidcespedescamargo6115]

Do we need to disconnect the battery of the car before removing the kvm ?

[@kingslyfru5988]

Very interesting

[@kimvandervurst6026]

hello good video!!! Can you also learn a used (from another vehicle) key fob on this car?

[@johnbortiehblabi]

Nice one bro thanks

[@AutelConsultancy]

Any time!

[@sherrykyosaba]

Wonderful

[@user-em5jo3ws7l]

You said that vehicle can have only 2 keys, and we adding third, do we need to delete the lost one?

[@24hmelbournelocksmithdotco6]

Any idea where we can obtain one of these crystal quartz components? I broke one, getting it off. Programmed the keys successfully, but buggered it. Need a new one Any ideas?

[@adesinaloukouman6445]

GOOD VIDEO WHY NOT EXPLAIN WHEN IS 2 KEY THAT WE NEED TO ADD AT THESAME TIME FOR THOSE WHO DONT KNOW THAT WE NEED TO TAKE THE FIRST KEY FILLE TO WRITE THESECOND KEY thanks and MORE IMPROVEMENT

[@vladimirhernandez6379]

Hola gracias por la información quisiera saber si cuando se acabe la actualización de 1 año de autel im608 pro seguiré haciendo programaciónes que Requieran conexión a internet como pin code y programación en BMW y Mercedes Benz que hay que conectarse a internet gracias excelente trabajo

[@solosolo1255]

for some reason the manual only shows MC9s 12 XEQ 384, but I have HPLA -XET 256, and how can I connect to it?

[@swarajjoye]

Hi Justin, once again thanks for this great video. Quick question, once you've read and write data back on the MCU and key programmed. Then in the future can you programme another key without the need of removing RFA/KVM again. Or can you just add key like the BMW F series. BMW F series once you've jail break the FEM, i believe you can just add key anytime without the need to remove the FEM. Thanks Justin.

[@AutelConsultancy]

Usually just adding a key doesn't require doing the all keys lost procedure. Its alot easier to do via obd. Belive it or not ive only done all keys lost on these vehicles so I would need to check with my developer be sure

[@gregjones8501]

Thanks for the video! I don’t work on too many rovers but just knowing the hookup is definitely helpful! I have t used by 608 to program amy keys yet... Will it work on 2018 Chevy and ford trucks?

[@Bohemianbiker1k]

If you wanted to work on us cars you could have spent less with a different programming tool

[@javierguarda4261]

hi how are things. I have a problem with land Rover Discovery sport 2016 a client brought it to me to make a key copy. I removed the kvm and read it with autel in safe mode and did the same procedure as always, but this time something happened and the car only works with emergency start.

[@user-co6pd3pw7h]

Hi Curtis have you actually done this process yourself or does it require a specialist?

[@AutelConsultancy]

If you know how to soldier , you can do it yourself. If you dont you can outsource it

[@wiki-leak]

7:33 it's not true Both secured and unsecured has a capacitor and resonator for processor time stabilizer purpose (processor clocking)

[@tonyreyes3294]

Autel needs to be more specific on what cable goes to what for the price of that autel scanner 👎🏻

[@hemangsureja8891]

Good job

[@AutelConsultancy]

Thanks. Im glad you enjoyed

[@rwscarlett2958]

Question! Can IP616 do this kind of programming with the XP400?

[@matthewla-haye3913]

Hi, can I overwrite key position 1 and 2 with the new keys or delete these at all as they are lost?

[@AcuraJ32]

Curtis, I emailed you several time and NO RESPONSE any reason for this? Please Explain...

[@AutelConsultancy]

Hey Lou, did you book a consult with me? Go to www.auteltech.co.za and book a diagnostic tool consutlation. Follow the prompts and book the date and time you would like me to consult you.

[@noelarios9410]

Holly snap. Just like that

[@borderm3]

First time trying to print an Operating Guide. My IM608 only has one option under the print dropdown 'Print this page'. I cannot figure out a way to print the entire operating guide? Thanks

[@MrTechKey]

Did I miss the reason for the 2nd fob?

[@rogerbrandt6678]

So if you’ve gotta take stuff out and start soldering small connections, would it just not be cheaper for the customer to get it made at the dealership? Compared to all the time you have to invest.?

[@AutelConsultancy]

I guess it depend on your location. Most dealers are extremely expensive . Especially on Euro vehicles. What I can tell you if your able to to do this procedure ( in terms of soldering) it will open up alot of opportunities for you as there are alot of problems that your able to solve that you can charge a premium

[@waseemjafri2398]

autel 508 without xp400 support range rover smart key 2018

[@jimgarcia6824]

The autel scanner it’s pretty bad when it comes to Nissan

[@Best-hz8wt]

The soldering diagram is different between secured and unsecured. How to know which module we doing before soldering and reading?

[@AutelConsultancy]

You wont know until you open it to see if its a secured or unsecured. This is how you tell the difference kzbin.info/www/bejne/eGm7ha18jcehpKMsi=nzxcDoN5oVyNERu1&t=427

[@Best-hz8wt]

@@AutelConsultancy thank you so much))

[@user-ue8yu3om2o]

I have a range rover sport 2016 akl situation what i do for program a new key the system is lock i hav

[@Bohemianbiker1k]

The iIM608 Pro does not come with "apa106". It has "apa107" "apa108", and "apa109" same thing?

[@blackkeyecm]

IM 508+XP400PRO can DO THIS program

[@drewcarter5435]

Will the 508 do this as well? Can u distinguish what the 508 can't do?

[@borderm3]

2016 Evoque. All keys lost. Hatch doesn't open with exterior or interior button. Can't take carpet off to get to RFA without opening rear hatch. Looks like it probably has electronic (no cable) latch so even if we hack into the hatch from inside I don't think we could open it. Anyone find a solution for this situation?

[@fj7334]

Hey man why is your video always 10 frames per second. I enjoy your videos but the setup is just off. Is it because of the animations and software you’re using?

[@stevehamilton9924]

Hi Just bought the im608 will the Autel program the new KVM /RFA box and then new keys ?kind regards Steve HSD Electrics

[@COSMEGARZAJR]

Where can I buy a crystal quartz capacitor? I damaged one? Would radio shack carry these?

[@bmwloverforlife8091]

I use my autel im608pro2 to add keys to cars, I bought two keys from my usual key provider and I just normally code them to the car that I by them for but I am trying to code a key to a 2024 range rover sports, the keys are the same frequency and style but when it ask me to hold the key in had then to press any button it never read the kesy, I bought 2 more keys and it is the same results, i then decided to read the keys in the programer and I notice the keys say lock on them even tho they are brand new, how do I unlock the keys, I know how to do it with bmw keys and benz key but I don't see any option for range rover so I am wondering if I need to plug on to the car before I can do so? As for bmw and benz, you don't have to be plugged on to a car to unlock the key, so that's the reason I am asking to see if I can get some answers?

[@themechanicpapaline8380]

Please can the im508 program or add key to Range Rover 2018???