Auto body filler tips and techniques.

In this episode I'll share all the auto body filler tips and techniques to repair your project quickly and efficiently to give you the best results possible. I talk about tools that will save time along with the right sand paper and blocking techniques to repair your car at home. If you find this video helpful consider supporting the channel!
My amazon affiliate store : Tools and materials categorized to help you find what your looking for
CLICK HERE
⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️
www.amazon.com...
In this video
⬇️⬇️⬇️⬇️⬇️⬇️
body filler rasp
amzn.to/3BtXkDR
80 grit hook and loop sand paper
amzn.to/3J2mJGY
320 hook and loop sand paper
amzn.to/3PtUGme
round sanding block
amzn.to/3aSzXJy
dry guide coat
amzn.to/3oD6CGx
evercoat z grip filler
amzn.to/3B6nyfL
evercoat plastic honey
amzn.to/3Po1Rw0
clean sheets mixing board
amzn.to/3rfoeK7
dura block kit
amzn.to/3PE8DNO
motor guard flex block
amzn.to/3JxTUR6
Roberlo me1 damage 2k primer
amzn.to/3xkBhO5
prep solvent
amzn.to/3O3JrR3
Auto body line maker tool
amzn.to/3KxzusJ
mirka dustless sanding system
amzn.to/2Y5h2VE
Icing glazing putty
amzn.to/3iPXVG5
3m Performance paint gun
⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️
amzn.to/3scqGAf
If you find this video helpful be sure to let me know in the comments. I welcome your feedback and questions
SUPPORT THE CHANNEL
⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️
LIKE AND SHARE VIDEOS
SUBSCRIBE!
COMMENT!
AFFILIATE LINKS!
www.amazon.com...
SUPER THANKS button
Business Inquiries: [e-mail]
Follow us on Instagram and get the scoop on upcoming projects!
/ garagenoise247
Follow us on Tik tok
vm.tiktok.com/...
video equipment I use
⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️
Go pro 7 black
amzn.to/35ddyAf
Rode wireless go
amzn.to/3xpJDAW
Dji osmo action
amzn.to/3cCjdUD
Acer Nito 5 laptop
amzn.to/3wvc2W0
CHECK OUT MY OTHER HOW TO VIDEOS
⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️⬇️
Autobody repair made easy
• Auto body repair made ...
how to prepare primer for paint
• How to prepare a car p...
using body filler to repair a dent
• Using body filler to r...
How to repair body damage on your car
• How to repair body dam...
how to save a bad paint job
• How to save a bad pain...
How to repair and paint your bumper
• How to save money pain...
How to remove fisheyes from your paint job!
• How to remove fisheyes...
How to save a bad paint job
• How to save a bad pain...
Song: Dipcrusher - Islands (Vlog No Copyright Music) Music provided by Vlog No Copyright Music. Video Link: • Dipcrusher - Islands (... ​ -----------------------------------------
Disclaimer:
Due to factors beyond the control of Garage Noise, it cannot guarantee against unauthorized modifications of this information, or improper use of this information. Garage Noise assumes no liability for any property or personal damage that may arise from doing a repair on your vehicle after watching any of my repair video's. Due to factors beyond the control of Garage Noise, no information contained in this video shall create any express or implied warranty or guarantee of any particular result. Again Any injury, damage or loss that may result from improper use of tools, equipment, or the information contained in this video is the sole responsibility of the user and not Garage Noise.

[@GarageNoise]

I hope you enjoy this video and find it helpful! If you do consider subscribing and becoming part of the community! If you have any questions as always leave them in the comments below. ⬇️⬇️⬇️

[@jamesmarques7245]

I like using ever coat light weight. I Use the cheese greater in colder weather below 75 degrees. In hotter weather I Use 36 grit sand paper. To make this body filler easier to sand I mix ever coat metal glaze with the body filler and resin.

[@oopspaint]

Love it, He's doing good, before you know it, he will be painting! Good job!

[@billsheehy1660]

Enjoy everything you put out, every day is a school day, even if I know or have done it, its good to be reminded of the right thing. Thank You

[@GarageNoise]

Thank's brother! Appreciate all the support!

[@sealisland1]

A good way to keep your filler from kicking fast is to spread it out like you did on the board. A mound will generate a lot of heat and you'll have a paperweight.

[@smithjohn3080]

this is the way. tech term is exotherm

[@drummer_zay9493]

I like to slap all my filler onto the adjacent panel and just grab as i go. 😁

[@TwinTalon01]

Awesome video. Super helpful, no fluff, really appreciate it!!!

[@GarageNoise]

Thank's appreciate your comment and support!

[@karsbkool]

40 years ago we called the cheese grater a "butcher file" lol. I'm still happily "butchering" to this day

[@GarageNoise]

Haven't heard that one! Lol appreciate the support

[@karsbkool]

@@GarageNoise how about 2 inch putty? Ya heard of that?

[@ricardomartinez4898]

Great work. Youre right about the inexpensive body filler. Going to try this brand. Question??? Can you still use the cheese grater even after the filler has dried? Thanks again.

[@GarageNoise]

You can, but it's just not as effective .

[@philliptomlinson1275]

Love the cheese files they save you a heap of time on roughing back

[@GarageNoise]

Absolutely!

[@hubertthor40]

Excellent demonstration, Thank you

[@GarageNoise]

Appreciate it! Thank's for the support!

[@rcs0296]

those onion boards are the cats meow, I used plastic spreaders until I tried the metal ones,plastic is good for large areas but the metal are sharp and dont flex as much

[@GarageNoise]

Metal spreaders are a good option as well. Appreciate your support Richard!

[@otisjones5974]

What’s the difference between blocking at 40 vs 80? Does it differ between vehicles or panels? Or dies it depend on the type of mudd I’m using

[@poky8390]

36 on a block would of been more efficient as far as time and saved a step. Then hit it with some 120 on a da to get rid of the deep scratches. And unless you’ve done a lot of bondo work it’s better to undercut and recoat the entire area trying to feather into a an already established area of bondo will be about impossible for most people, they will sand differently and you’ll end up with a transition that’s noticeable

[@james4228]

I tried using Bondo filler but it's such a pain to work with it's very messy just crap what filler you recommend for like chipped paint and small rust holes? Tia your videos are very informative

[@GarageNoise]

This stuff here is awesome! amzn.to/3Pb66fJ upol lightweight gold

[@james4228]

@@GarageNoise I appreciate it brother💪🤝

[@fredf4562]

Awesome dude!

[@tsrtrickster8461]

Does the 600 get rid of all the 320 scratches in the primer?

[@GarageNoise]

You don't have to remove all the 320 scratches in your primer. You can paint over 320 but I would at least sand over with 600 to smooth it out if you don't get all the 320 scratches it will be fine. Appreciate the comment and support!

[@MoDave82]

I have also used stucco screen to hold Bondo like in the cab corners it's easy to shape into place

[@GarageNoise]

👍

[@Here-2-Learn]

I don’t see the sanding block you used on your store? Some of the stuff is no longer available which sucks I want the tape thing

[@GarageNoise]

The flexible block? Other stuff should come back in stock.

[@courtneylewis9500]

Great job

[@GarageNoise]

👍

[@courtneylewis9500]

What's the best buffer polish for polishing?

[@jukes31ryanable]

I've seen ppl put a plastic bag or wrap over the Bondo so it dries already in shape.

[@GarageNoise]

🤔never tried that.

[@randalldragoo9569]

You are amazing

[@GarageNoise]

👍appreciate the support!

[@joanwilliams3221]

Always learning thank you…

[@GarageNoise]

Your welcome and thank you for the support!

[@geraldsheppard6558]

A great filler shaper is a hack saw blade, it will bend to shape curves. A bit tough on the fingers to hold, but works great IMHO.

[@cykablyat1466]

thanks

[@GarageNoise]

👍

[@DavidGuns]

Many many moons ago when I was at a autobody shop we all would play jokes on each other. The one joke was when someone walked away from a wet coat of filler was to stick a quarter in it lol 😆 We would only do this one the first coat. Some guys would sit to watch the filler dry lol 😆 It was all done in fun but pay back would be even more fun sometimes. I once got paid back one of the guys squeezed rubbing compound down my pants as I was squatting down, that was a big mess

[@GarageNoise]

That compound in the pants is epic! Lol

[@DavidGuns]

@@GarageNoise yes it was, this was 25 year's ago and I still hear about it. I do not remember how I paid him back

[@robertcampbell5605]

The quarter in the filler is okay, but compound in my pants.. shit would get serious real quick. friends or not

[@jefferypowell9885]

I've used surf form 40 years ago

[@GarageNoise]

40 wow!

[@alfonsoromo6928]

Mancilla poliester

[@GarageNoise]

?

[@chriscatarcio2983]

Good video. But a waste of time on a p.o.s. M. Van. Gide coat??.. straighten it mud it D.A. it primer it paint it. And get that eye sore out of the shop. Look for stuff worth fixing. Chances are it will be back with a dent on the outher side. Lol. JUNK.

[@GarageNoise]

Lol, They pay I fix simple as that!

[@chriscatarcio2983]

@@GarageNoise I NO . Take pride in your work. I just can't get excited about the GARBAGE of today. Then the people with CLASSIC cars don't want to pay you. Unless your chip foose. L.O.L.

[@GarageNoise]

@@chriscatarcio2983 I understand. I like to work on cool stuff too. I also like the process of the repair. This mini van was her baby and she was excited about it when it was done.

[@clinttorres2508]

@@chriscatarcio2983 u sound like a kid..ive been a carpenter woodworker 40 yrs I don't always get to work on a million dollar home with high end trim etc..average homes pay the bills too

[@branchandfoundry560]

@@clinttorres2508 You nailed it. It's important to maintain perspective and remember even the "Old Masters" like van Gogh mostly painted portraits of snotty nose kids and dogs to pay the bills between their rare masterpieces. We should all be grateful for our clients, not too good for them. Pride comes before the fall.

[@ajd5363]

Filler on bare metal 🙅🏻‍♂️🤦🏻‍♂️

[@GarageNoise]

I use all different techniques. Sometimes I put it over bare metal. Sometimes I put it over sanded paint. I know a lot of guys are wanting to put epoxy over bare metal before they apply, body filler these days. But in a production shop that's not always feasible, and to be honest with you, They've been applying body fill over bare medal for years. With no issues, as long as it's done properly

[@ajd5363]

@@GarageNoise I mostly follow restoration processes, so that’s where I’m coming from.

[@clinttorres2508]

What is your opinion on bondo body filler..I don't see too many professionals using it..what's the pros n cons as u see, since that's all I've ever used..im a non professional

[@GarageNoise]

It's ok, it will get the job done. If you use a higher quality filler you won't go back to it. They sand much easier ,smoother which means less pin holes.

[@clinttorres2508]

@@GarageNoise gotcha, there is that..hard to sand n always needs to be glazed over..thanks 👍