Auto Verdi - Dry Sump Oil Pump for the Volvoghini

Check out AutoVerdi
www.autoverdi....
My instagram:
/ peterbjorck
My second youtube channel (Swedish):
/ busbil
My Facebook page for my cars:
/ bjorcksbusbil
My company: www.bjprace.com

[@Z4G.]

The strive he has for quality in his builds are so fukking insane. Any build by Peter is a work of art no doubt about it.

[@peterphilipse8792]

I wish we had these videos when the supra was being built

[@miguelneto2695]

Nice video... good to see that the Swedish industries are alive and well!!!

[@jamest5149]

‘Very nice’ for Peter to take us on the Auto Verdi shop tour 👍

[@brianbob7514]

All those beautiful parts, what an amazing manufacturer. Thank you for the tour.

[@AndrewEG]

Auto Verdi has a good reputation! Great that you are show casing Swedish manufacturers. And love the accent too lol, "Partsh"

[@viktortegelberg]

Sånahär videos gör en lite patriotisk. Snyggt jobbat Auto-verdi 🇸🇪❤️💪🏻

[@pepzie27]

👍👍👍

[@petter5721]

🇸🇪👍🏻

[@rompdude]

Jesus that sump is a thing of beauty!

[@turdferguson9190]

That oilpan for Revline Racing's billet K24-engine looks great!

[@GeoffSeeley]

Impressive quality and workmanship in those pumps! Thanks for this tour Peter!

[@GordonjSmith1]

Thanks for the tour, I learnt a lot! Lovely looking engineering.

[@driftworks]

Very impressive. The LS oil pan you showed actually looks a lot like the Dailey Engineering/VAC motorsports oil pan I had for my S85 V10. The design and quality makes me wonder if it's AutoVerdi that manufactures it for them.

[@petrzem4959]

No, Dailey makes it in house in USA, Auto Verdi system is lets say inspiration from Dailey :D. But this system were seen on some rally kitcars in 2000´s..

[@djambrosia]

Sweden makes all the best pumps.

[@turdferguson9190]

Insert random Austin Powers Swedish-made-penis-enlarger-pump-joke her...

[@ashtechltd]

Such a cool Company and Stefan and Steen are great guys 👌🏼

[@thestreets5206]

I seriously enjoyed this video, very much appreciated. Superb quality, now I know where RCM get there kit from 👍👍👍

[@peterphilipse8792]

I wish you had access to the technology and parts available now for the supra and documented it like this. Dream series.

[@jareknowak8712]

Almost same methods/techno in every car.

[@gafrers]

Another great video. The products are so high spec, so well made, such great engineering and quality the all way thru. I love when you make these tour videos

[@roadiesgarage3816]

Auto verdi is on a whole northern level. I need some 606 rods in my life.

[@levesquejp4964]

Insane craftsmanship its purely beauty and pride in this

[@hondacrx0]

Exited to see end result of Volvoghini :)

[@bobross6677]

Most important part of a true racecar

[@andershaugen5463]

There is so much cool stuff for motorsport thats made in sweden, its ridiculous.

[@wheeln24-79]

Rob Dahm needs to get one of those pumps if he doesn't already. Supposedly he had a dry sump oil pump failure at his first half mile event with the 4 rotor. I hope the ecu shut it down before any damage was done!

[@BackmansGarage]

Another intresting video! Thanks for bringing us with you on this tour 😀👍

[@bartselter5332]

Too bad there is no way to contact you directly. You are doing an amazing job, video wise but also with the informative engineering. I honestly love your video’s, the way you talk about engineering and get happy when you see good engineering makes my day! Keep up the good work, amazing video’s, really interesting and very educative!😁😁

[@TheReinoPaasonen]

Wery cool to see these parts and shops in detail. Thank you👍

[@ElCamino439]

You also find AutoVerdi connectingrods in Ken Duttweiler built landspeed recordholding Chevrolet engine.

[@squarefour1]

Nice pump. I just purchased a used 6 stage. It definitely is pretty nice.

[@Riyazatron]

Peter you are class

[@ReeceM69]

Man you’re like the Swedish Rob Dahm

[@koirasdilluminatioy3835]

Cant wait to see it when its rdy 👌

[@drubradley8821]

Yes people... Pay close attention @6:55... more directly @7:00... The timed wood drift key slots... that is critical.... pending how many pumps are in line, of that type of lobed pump system... if not, you will have surging and or pulses of under pressure and worst of all, over pressure.... I had another brand of pump that was for a machine collection system, that would vibrate, and rip itself to shreds in very short time, and this machine was every bit the cost of $200K USD.. and we couldn't figure out what was going on each time it failed... until the service call for a new inline pump came up to be replaced the replacement unit a year later.. and all the vibrations went away, the destructive pulsing was gone... .. If each pf the pumps is its own system, or is a low RPM's, then not a big deal, but if either of the intake or output side share feeds channels, Make sure these lobes are timed... Kinda like how they showed at this time stamp @7:00... good luck

[@riptwan]

Just beautiful

[@fanimej]

Only The best is good enough for The old Volvo!

[@FrostyAMG]

Very nice motorsport parts manufacturing in Sweden. The women are also pretty too.... maybe I should move to Sweden

[@interesting7906]

Sweden has been known for pumps of a disparate variety of applications since the 60s. ;-)

[@lionofzion81]

Austin Powers already knew that the best pumps are swedish made

[@MacT-oc9gq]

snyggt har en pump från verdi på in som ar funkat klockrent sen dag 1

[@petter5721]

Tack Peter 👍🏻

[@mk1cortinatony395]

I wonder if the US racers give credit to the Swedish engineers? Good ol usa lol

[@sucapizda]

That pump is probably so expensive, it would probably pay of my mortgage.

[@JH-jo9wt]

Maybe in Uganda

[@ricky107_]

You could probably buy a Volvo for that money

[@Manufalket]

Nice video amigo 😀👍

[@andymitchell368]

Excellent really enjoyed the information there

[@the_hate_inside1085]

Visst fina pumpar, men hade grabbarna en bild på Gunde Svan upphängd någonstans i verkstaden?

[@Sac_slappper_4rce]

A Lambo V10 engine highly customized revving @ 9000 rpm in a Volvo. If I had that; I probably could not drive it. I would be rolling on the floor laughing my ass off after 5 minutes.

[@owcarnia]

I'm thinking of getting a dry sump system for my turbo volvo redblock.

[@rudiknapen4863]

Where gonna miss you when you are traveling back to your own Planet

[@IngeBall]

Nice!

[@nuw4]

Hejhej hembyn!

[@hodillac]

Cool shop tour. But i left wondering that will there be enough oil for that sweet K24 when that VTEC kicks in yo?

[@Jonathan_Doe_]

Why does that press sound like chewbaca?

[@jareknowak8712]

It is very hard to buy used dry sump pump.

[@ew4206]

RCM = Roger Clark Msport

[@nochan99]

Fun fact: "Auto Verdi" literally translates to "Auto Value"

[@phiberoptick]

I have said this before, but Volvo's are the best car ever made. I have one sitting in my garage right now.

[@nickturner2813]

Why do you keep saying it when it clearly isn't true? There are many cars just as well-built as Volvos and many that are better-built. Your having one in your garage sure doesn't make them the best cars ever made! He's getting parts for his *Lamborghini engine* , didn't you notice that *nothing whatsoever* in this video had anything to do with the quality of Volvos?

[@rickcave4616]

Oily meow. xD

[@stenmarkarn]

När åker du tillbaks till Dubai?

[@PeterBjorck]

Vet ej!

[@AndrewKidd14145]

Need that company to build me a oil pump in he future if I don’t have a CNC machine and my own schematics by then

[@kize32]

Isn't Lambo engine already dry sump?

[@thebigmacd]

This one appears to be. At the end where he was pointing out areas to connect the lines, I'm pretty sure those are suction passages.

[@diraziz396]

Great. Mechanics Porn..

[@madmaniacloony]

How much do you think they would want for some 2jz rods?

[@pepzie27]

about 190 euros plus VAT

[@nickturner2813]

If you were serious you'd have asked them, or one of their retailers, directly, they're not hiding and they're sure not going to be looking for customers in TY comments.

[@pepzie27]

@@nickturner2813 it's about 190 euros plus vat but it depends. what is the model of the connecting rod

[@TheDroidKilla]

this is the pump @rob dahm needs

[@KalleKofot]

Allen bolts.

[@smitthone]

3:29 200 MM of teflon?? MIcrometers maybe?

[@kastapostgard5306]

He says two hundreds of a mm.

[@walrustalk]

I think he said a 200th mm

[@smitthone]

@@kastapostgard5306 tried to listen twice was not clear. For sure NOT 200 mm....

[@jonasthemovie]

0.02mm