No other car channel gives such easy to follow, straight to the point quality information. Keep it up!
@dylanzrim10115 жыл бұрын
artdamage0 the skid factory. You’ll get this and more.
@artdamage05 жыл бұрын
Dylan Zrim don’t get me wrong I love the skid factory and Al is an amazing mechanic, but the level of professionalism and straight up knowledge dropped in these videos is second to none
@markoz673bajen85 жыл бұрын
Chris Fix.
@thomasmoser73823 жыл бұрын
@@markoz673bajen8 chris fix... really???? the guy who "repairs" a rusted fender of a unibody where the rust is so bad that a good part of the inner fender is seperated from the outer shell just by slapping some mesh and bondo on their? do that on a few key parts of the body and the structural integrity is pretty much gone, good luck in an accident.
@1hdsquad5 жыл бұрын
Man, I absolutely don't *need* a dry sump, but I need one because it looks so important and racecar
@JonnyD3ath5 жыл бұрын
1hdsquad craving a drysump system so bad right now lol
@MindYaBizz_Whiz5 жыл бұрын
They cost a lot, but when you look at all the pros to them, you understand why they’re the best route for performance oiling on a race car.
@baddonkey68765 жыл бұрын
The part where you said "I need to talk to the engine builder...me...about doing a better job." That made me subscribe on the spot, people never admit when they make mistakes these days so they never learn from them if they just ignore mistakes. A damn good engineer like you always gets better cause you never stop learning and always takes credit for any mistakes.
@qx4n9e1xp4 жыл бұрын
Yeah, he is a true, humble success. There are all those trophies in the background, but even he makes mistakes when working in his specialty. The difference is, he keeps on truckin' Persistence, not Complacent.
@Chemicaleyelink2 жыл бұрын
I made a mistake, by bang n your mom ! Now she can't stop calling me
@sweissco3455 жыл бұрын
What I love about these videos are how informative they are without being too long
@JonnyD3ath5 жыл бұрын
daily Whatever he is great at conveying alot of accurate information in a quick and easy to digest form
@Blyatarina5 жыл бұрын
Check our Moto iQ as well. The few videos they do publish are generally great information.
@Taylordrifts5 жыл бұрын
I'm so glad I went drysump on my LS Miata. Amazing oil pressure at all times, doesn't drop off hard with oil temp, much better oil temps, no worries of starving it in drift.
@wowthtsgood5 жыл бұрын
You're a beast
@bmlove812 жыл бұрын
Could a dry sump oil system, solve the issue of oil dilution? Which seems to be a problem for vehicle with direct injection.
@imakedookie2 жыл бұрын
i would imagine most of the benefits towards oil dilution by fuel from a dry sump would be: 1. higher volume of oil, so ratio of oil to solvent would be lower over same amount of runtime 2. oil tank may be vented, and air oil seperator may additionally give time for oil to lose residual solvents. both must be run for a while, and i believe fuel dilution arises after consecutive cold starts, as cold Combustion Chambers allow for fuel to condense and hitch a ride with the oil. perhaps for direct injection applications, a warm-up oil heater could be integrated to reduce fuel accumulation in resevoir, which only runs within a low temp window to prevent unnecessary heat soak
@imakedookie2 жыл бұрын
see the toyota prius exhaust heat reclaimation system, plumbing coolant through a thermostat-based jacket around exhaust manifold, letting engine warm up in less time
@danielfontanez29165 ай бұрын
Does it produce a straight cut whine sound since it has spur gear inside?😊
@rodriguezangel625 жыл бұрын
Your videos are pure gold. Thank you 🙏🏽
@RadDadisRad5 жыл бұрын
That was cool. Didn’t know a dry sump doubled as a vacuum pump for the crankcase. Definitely helps for running a thinner piston ring and reducing ring friction.
@Leofred20005 жыл бұрын
Internal air cooling 🙂
@sasjadevries5 жыл бұрын
Thinner piston ring? Reducing ring friction? What the hell are you talking about, mate? If you look up the formula for dynamic and static friction you'll see it doesn't depend on the surface area. Just use the piston rings that are made to comply with the manufacturers specifications, and that's it. Snakeoil doesn't lubricate as well... What's actually the case is that the crankcase gets filled with blowby gasses; on a streetcar you want to pull those gasses out because they contain a mist with a little bit of unburned fuel that mixes with and dilutes your oil, and that pulling out is done by the vacuum in the intake manifold; on a racecar where oil gets changed so often that you would never notice that tiny fraction of fuel in there you just want to get the excess pressure in the crankcase out of there. So pulling a vacuum to counteract the blowby pressure is definately a logic thing to do, but i'm not so sure about going beyond that and pulling a vacuum, that introduces new problems. p.s. Ok, there are piston rings on the market that have a round over or a sharper edge that contacts the cylinder wall, but that thin edge isn't there for reducing friction, it's there to wear out faster, so that you have a faster first stage break in of your engine. Tin coated piston rings have the same effect, that tin is there for the exact same reason. And Piston rings with any kind of coating on the outer edge are there for the same reason. Due to a multi-stage break-in you will have an engine that performs better because the break-in happened at better conditions. That's what the engineers say, meanwhile the marketeers tell fairytales about reduced friction.
@sosic21215 жыл бұрын
@@sasjadevries While you are generally right about friction not dependant on surface, you forgot that the force with which rings pushes against the walls depends on surface area of the rings since it's combustion gas that pushes the ring against the cylinder wall.
@jewwyjones97605 жыл бұрын
If y'all could keep this discussion going it would be awesome so many principles involved in efficient combustion.
@bugsy90695 жыл бұрын
A dry sump also permits a larger oil capacity without making a bigger oil pan. The engine can be mounted lower, lowering the center of gravity. The oil tank can be mounted any where on the car for weight distribution.
@JonnyD3ath5 жыл бұрын
Unreal video series! Perfectly shot, edited and narrated. Cannot get enough of your content!
@Gavs_rc_hobbies5 жыл бұрын
Geat video. I've always wanted to see how a dry sump system works.
@ericcindycrowder74825 жыл бұрын
Great video. Many super cars now come with dry-sump from the factory. This includes the 2nd gen NSX, R8, Huracán, and pretty much all Ferraris from the last 30 years. In these vehicles the scavenging passages are cast into the sump and the external oil pump bolts right to the side of the sump. This eliminates all of the scavenge hoses.
@imakedookie2 жыл бұрын
theres a difference between a 120 dollar stock set sump oil pan with modifications and a 3000 dollar stock dry sump with integrated pump pan. apples and oranges man
@Jacob_Dwyer5 жыл бұрын
Crusher! Thanks Stephan, stoked I found your videos. Really appreciate you taking the time to show some of the tricks that make more ponies.
@turbo_alice5 жыл бұрын
i didn't even know that kind of oil pump existed 6 miutes ago, and now i completely understand how important they are in racing. that's what i call a well made video
@tylergeosano40435 жыл бұрын
Easily some of the best (if not the best) race car centric tech videos. Thanks for the time you put into these!
@kr4dh4x0r5 жыл бұрын
I just found this channel about a week ago. Really good videos, good editing, no BS, working on real race car stuff. It's a refreshing break from the typical autosport videos you can find on youtube.
@naftalithaithi48125 жыл бұрын
Thank you and keep up with the short info-packed videos. Informative enough and not too lengthy; they can be watched in between work breaks.
@markdavis24755 жыл бұрын
Blimey mate, I hope your work breaks are longer than 4 mins😀
@naftalithaithi48125 жыл бұрын
@@markdavis2475 Not always.
@alibabaei19533 ай бұрын
Hey man thanks for not making your videos into 45 minute cancer vlogs. you're classy, professional, and your videos are simple to understand, informative. you're the best. pls make more videos. anything the master of drifting makes i'll watch
@jamesnielsen1005 жыл бұрын
Thank you I yesterday was looking up things needed to do a dry sump to an old small block Chevy. You answered more questions then I had. Your videos are helping me build my first drag car. Thank you Stephen.
@Happy_2_Wheels5 жыл бұрын
This channel is pure automotive gold. Thank you very much.
@joeydallas23835 жыл бұрын
I seriously need to spend a weekend or maybe 10 in this garage. So much things I want to ask and learn. Thanks for the videos Stephan.
@FullSendPrecision5 жыл бұрын
I'm not sure how I ended up following this channel, but I'm glad I did. You do a superb job of clearly describing everything.
@hannah94185 жыл бұрын
Super good video! To the point, no fluff, very technical and thorough but easy to understand.
@VENUEATHENS5 жыл бұрын
Awesome breakdown of dry sump and oil pump..
@ggflowen5 жыл бұрын
I love these, all the aspects of race engine building are fascinating.
@JonnyD3ath5 жыл бұрын
Cole Cambruzzi i could watch hours of his content! Soooo good
@kaj7505 жыл бұрын
I just stumbled onto this channel. I'd like to say that I like how the information is presented. It doesn't have a host that screams, uses annoying camera effects, or other distracting B.S..... just right the point, educational, and accurate info. It's really a nice contrast when compared to other KZbin channels where the host is more concerned about camera time. This is the mechanic's/engineer's equivalent of Chris Harris On Cars. Brilliant. Thanks for the content! Subscribed.
@73notch5 жыл бұрын
I finally get why most pumps are 3+ stages. Thank you for the great video.
@michaelbarnett20775 жыл бұрын
I was pumped to watch this video! So cool to see how this works! Thank you.
@DodgyBrothersEngineering2 жыл бұрын
Oh the puns. You weren't afraid to go there...
@StrikeEngine5 жыл бұрын
These videos are absolutely brilliant. Great production, editing & knowledge. Required watching. Thank you!
@Levibetz5 жыл бұрын
Cool video! I'm kinda fascinated with dry sumps, even though I really don't have an application that needs one. Something I've noticed is that cars like the Z06 corvette (both LS6 and LS7) use a integrated oil pump in the stock location for their dry sumps. It would appear that they only use a single scavenge stage. This got me thinking, for something like a budget drag car with oiling issues, or a 24 hours of lemons car, could you fabricate a feed line to the stock oil pump, and run a cheap electric scavenge pump for a simple, low cost dry sump. Leave the stock oil pan in place, just allow for small amounts of oil to pool in the bottom. You could increase oil capacity and reduce oil starvation for minimal cost, but of course likely without the benefit of drawing a vacuum, or increasing ground clearance. Neither of which is a massive concern for either application.
@zuestoots51765 жыл бұрын
zo6 had oil issues from the factory
@slopetechno4 жыл бұрын
Love this, never seen the inside of a dry sump pump before and wondered if the scavenge and pressure sections were different.
@SpeedHero5 жыл бұрын
This style of video is why I've subscribed: Direct explanation by someone who seems actually human. I get no sense of urgency to purchase anything, or falsely hyped emotions, just direct information about what I'm looking at. Thank you Stephan.
@TripSkyWalker5 жыл бұрын
The Lil cone filters remind me of The filters in our Accessory module on a Blackhawk That we like to call Witches hats. I love how much is simillier to the Aviation world in racecars.
@michaelovitch5 жыл бұрын
By design the nose has a stuffy nostril wich regen his moisture and tissues every 3 hours or so.(like a DPF i guess lol) So you always have a partially clogged nostril for 3 hours and it switches to the other. Just try sniffing pretty hard several times during the day,you will see one side is working better than the other.
@JonnyD3ath5 жыл бұрын
michaelovitch i noticed this but didn’t realise that is how it’s meant to work! Interesting! Thanks for the info
@GettingGood5 жыл бұрын
A full race car oil system break down would be cool, if this is a vacuumed system then do you even need to have a catch can set up for blow by? Also thank you for the videos and the information! Super insightful!
@imakedookie2 жыл бұрын
apparently the oil tank can serve as an air oil seperator if built correctly, and the scavenge pump will pump crankcase vapors, oil mist, etc along with the air it takes out( the lack of air is what can be considered the level of vacuum) which is then fed through a baffled input to the tank. i believe dry sump takes the catch can idea and does it properly...
@bosnuts70585 жыл бұрын
It’s awesome and refreshing that you’re honest about things you recognize you can do better.👍🏽👍🏽
@Spudstrodamus5 жыл бұрын
Great video I love racing and burnouts but nothing better then learning how the parts work and seeing them in person. Especially parts the average mid level wrencher usually wont have or need.
@SYLRMS5 жыл бұрын
MORE ENGINE REBUILDS!! they are awesome
@helmysetiabudi99155 жыл бұрын
Oh My God!!! Do you read my mind today??? This morning i was hoping that you can do some teardown for dry sump system. But, now i when checking the notifications, this video is there. How cool is that?? Super nice 👍👍👍👍👍👍👍👍👍👍👍 Do you have some mind reading ability?
@Andrew-bd7mp3 жыл бұрын
I love the SCAVENGE IN label on every one
@MrCTruck5 жыл бұрын
This dude is the engine maestro
@bboyairrick4 жыл бұрын
this is what i realized. Stephen Papadakis's channel is like Jason's Explained Engineering channel but he actually shows us the real thing. And has IRL experience.
@rodrigoarce71885 жыл бұрын
I had never seen a system of these! Very educative! thanks 4 sharing
@kennethporst43592 жыл бұрын
I'm Definitely switching to Dry oil sump for every single one of my cars 🤘
@Demoni6965 жыл бұрын
Great video as always. Would it be possible for you to discuss aeration of the oil and how you remove the air?
@gigamac24865 жыл бұрын
I think the vacuum in the crank case would help with that, like how mold makers use a vacuum chamber for their silicon
@UnyieldingSeraph5 жыл бұрын
@@gigamac2486 i suspect you are correct, however after the oil passes through the pump it will again be aerated, but that happens on a normal pump as well.
@steveesm35 жыл бұрын
Wow thats so cool! I know the difference between dry sump and wet sump now.
@danielslaven28285 жыл бұрын
Love the way you explain what you're doing . I don't do imports but enjoy the lessons thanks.
@pekoso15 жыл бұрын
Wooow , I can't wait for more videos from this channel 👏🏽... Thanks sir for sharing years of experience and expertise knowledge!!🙏🏽
@StanleyRodgers5 жыл бұрын
I recently discovered your videos. Very informative. Not a car guy per se but I am always interested in technical stuff. Great job and I will be watching more of your content.
@pbalerig3 жыл бұрын
I never knew. Great video and great commentary!
@maxwellclark24943 жыл бұрын
Papa is a genius the best at what he does we love you man 😂 love the content 😊
@TheBigdutchster5 жыл бұрын
Thank you.
@mshef1405 жыл бұрын
St Paddy's Day gloves, nice touch!
@fastundercoverkitgoogle73815 жыл бұрын
Awesome content as usual! I definitely want to see more like this. PS: I have to disagree with some of the other comments. While it is great that you can convey such a huge amount of technical information with clarity in a short amount of time, I would like it if videos like these were somewhat longer and slower paced
@blkdna7485 жыл бұрын
Waaaa its like a supercharger for lubeoil similarly its increases the hrspwr!
@windward28187 ай бұрын
Since this is a relatively low pressure oiling system (easily sealed with an o-ring connection) why not just extend the aluminum housing to accept the pump inlets and omit the four hoses. The inlets would have a metal tube each with dual o-rings and mount to the housing and the block. The pump would be closer to the sump and the intel prime would be a shorter distance. Have you ever designed a dry sump which has an electric motor drive (this is very popular for off highway)? For road car applications which require redundancy, the pumps are spit into two sides or two scavenging pumps and the two are joined with check valves such that if you loose one brushless dc motor the other will make sure the engine is not starved of oil. The pumps can be smaller, more efficient and with tighter tolerances because they run at a single speed.
@MrCystic895 жыл бұрын
This is really cool, now i understand how a dry sump works, thanks :)
@Dem1g0ds5 жыл бұрын
I really like the format and content of these types of your videos. More please! Lol
@QantonisQ5 жыл бұрын
Is that a new Corolla there? 2:23 😉
@DumbledoreMcCracken5 жыл бұрын
Love the videos, and wish to have one of your beautiful engines. There is no suck, there is only blow. Atmospheric pressure blows the oil into the pump, and the pump pushs the oil against atmospheric pressure. In a total "vacuum" there would be no oil flow unless the pump was lower than the pool of oil.
@athomedetail65125 жыл бұрын
Steph, you're a legend!
@chillyourself52085 жыл бұрын
I see Papadakis racing , I click. Then I learn. Thanks.
@wolfmanjacksaid5 жыл бұрын
Your videos are both informative and entertaining. Thank you sir!
@profesorchris5 жыл бұрын
Chris ogląda i lajkuje
@cr7savage709 Жыл бұрын
Hopefully I’ll be able to build a successful dry sump system for my custom engine project 😭😭 W video 🙌🙌
@spkrman155 жыл бұрын
Great videos Steph. Keep them coming
@butcht63095 жыл бұрын
Such an amazing engineering!
@ChungvuiminMichael5 жыл бұрын
this is really cool, i wish our 2JZ dry sump systems are more affordable so that we can use them in all our 2JZ applications
@daos33005 жыл бұрын
these videos are so good, my only complaint is they are too short. could easily watch hours of this stuff.
@Axelraider5 жыл бұрын
Extremely helpful video man. Im needing things like this. In my build
@Jrsims865 жыл бұрын
I absolutely love your videos!
@popomomo125 жыл бұрын
I loved when you said you're gonna have to talk to the engine builder 🤣😂
@GabrielGames1005 жыл бұрын
Congrats on 100K!
@lsturbointeg5 жыл бұрын
Interesting stuff Stephan!
@miamatti5 жыл бұрын
Another great video as always, and I may be a square but I like the professional video presentation
@mdbadalmiah68085 жыл бұрын
Thank you sir
@TheDriftingDad5 жыл бұрын
Great explanation Steph, makes me want to build my own system
@sparkplug9645 жыл бұрын
Very nice engineering in them parts, love it.
@charlesshamseldin95555 жыл бұрын
Thank you for a great video Steph
@markreynolds38502 жыл бұрын
Awesome video , thanks for sharing this.
@dr.mantistoboggan4746 Жыл бұрын
Didn't know about the crank case ventilation benefit part
@fastmidis5 жыл бұрын
μπράβο ρε φίλε από την όμορφη Θεσσαλονίκη!
@peterjanick59025 жыл бұрын
Love the channel. Great info presented clearly.
@christopherchavira29485 жыл бұрын
Love the knowledge you have and give to us that want to know 👍🏾😎
@Leo-xd7tp5 жыл бұрын
Thanks for content
@guilhermegaburro17725 жыл бұрын
Another great video !!!! Thanks for lesson !
@austinbarrett96135 жыл бұрын
I enjoy watching your videos they educational and entertaining.
@AndriyMisuyrak5 жыл бұрын
short and useful
@המכונהשבאופנוע5 жыл бұрын
love your work man, you're a real pro!
@Chopwoodcarrywater5 жыл бұрын
Good explanation!
@tptrsn5 жыл бұрын
Thank you sir!!
@diggs72525 жыл бұрын
Top Notch!
@ruikazane51235 жыл бұрын
The main reason why dry sump systems are better is the fact that you have constant oil pressure on all the galleries, tubes and passages which is important for adequate lubrication without causing oil starvation, which is possible on a wet sump. Since the oil is stored in a separate container than the engine itself, you can have more a better cooling effect in the process. The drawback is there is a difficulty of fully draining the oil, unlike a wet sump system where all the oil is at the oil pan.
@snikwadRR5 жыл бұрын
Loved it. Absolute awesome. Thanks.
@Blackmage505 жыл бұрын
Really loving the videos! 👍
@ThePkMartin5 жыл бұрын
I love your videos! Please keep doing more! ❤️❤️❤️
@austinsears16375 жыл бұрын
Great content as always!!!
@benjamincolumbus5 жыл бұрын
Love these videos!
@ashteregg21335 жыл бұрын
verry nice always wanted to see one of these pumps stripped down was unsure what type of pump was used inside
@aaronschen98965 жыл бұрын
channel is so excellent, we will forgive you for the excess RTV